Evaporation and Evolution of Suspended Solution Droplets at Atmospheric and Reduced Pressures

Thermal history and solute precipitation behavior of suspended solution droplets of sodium chloride (NaCl), magnesium sulphate (MgSO₄), and zirconium hydroxychloride (ZrO(OH)Cl) evaporating at atmospheric and reduced pressures are studied. Experimental measurements on the variation of droplet diameter, solution concentration, and temperature during the evaporation period are presented and discussed. The results of solute precipitation behavior in solution droplets observed under an optical microscope are displayed and discussed. Results indicate that reducing the pressure (∼ 33 kPa) results in a change in the solution droplet evaporation rate, but the thermal histories of a particular solution droplet are similar at the atmospheric and reduced pressures. At atmospheric and reduced pressures used in this study, the d² law for solution droplets is valid at early stages of the evaporation and before the solute precipitation initiates. Drying of MgSO₄ and ZrO(OH)Cl solution droplets results in the formation of spherical particles, whereas drying of spherical NaCl solution droplets results in the formation of cubic particles.     

Numerical Simulation of Internal Oxidation of Steels during Annealing Treatments

This paper presents a new model for simultaneous diffusion and precipitation of chemical elements in metallic matrices, a scheme for its numerical solution, and several applications to problems of internal oxidation. The model basically stands as an extension of the classical Wagner model for internal oxidation of steels, but is more much general in that it allows for an arbitrary number of diffusing chemical elements, an arbitrary number of precipitate phases with arbitrary compositions, dependence of diffusion coefficients and solubility products upon (time-dependent) temperature, etc., thus allowing for a much broader range of applications. As a counterpart, it is generally impossible to solve the complex, non-linear equations of the model analytically, but this can be done numerically. The simple but efficient numerical scheme proposed is based on explicit 1D finite differences. Experience has shown that this scheme, in spite of its rusticity and the restrictions it imposes on the time-step, is more efficient than more elaborate strategies based on the finite-element method. The applications presented are concerned with internal oxidation of steels during annealing processes. The model and associated numerical scheme allow for evaluation of the amounts of the various oxide precipitates in the external layer of the sheet. This opens the way, through numerical parametric studies of the influence of the process parameters and the chemical composition, to the improvement of existing treatments and the development of new steel grades.     

多元分析法在沉淀滴定中的应用

将多元分析法应用于沉淀滴定之中 ,提出固定电位的方法 ,建立了沉淀滴定中各组分浓度与体积之间关系的数学模型 ,对卤素和硫氰酸盐混合体系进行了测定。     

The Effects of Aging Precipitation on the Recrystallization of CuNiSiCr Alloy

The interaction between precipitation and recrystallization and its effect on the properties of the Cu-Ni-Si-Cr alloy during aging were discussed. The results show that the deformation results in much more dispersed precipitation of the phases. The precipitations have accelerating or retarding effects on the recrys allization. On the formation and growth of recrystallization, the precipitated phases are coarsed or dissolved in front of grain boundaries following a re-precipitation in the recrystallization area.     

Synthesis of γ-Al2O3 nanoparticles by chemical precipitation method

Highly pure active γ-Al2O3 nanoparticles were synthesized from aluminum nitrate and ammonium carbonate with a little surfactant by chemical precipitation method. The factors affecting the synthesis process were studied. The properties of γ-Al2O3 nanoparticles were characterized by DTA, XRD, BET, TEM, laser granularity analysis and impurity content analysis. The results show that the amorphous precursor Al(OH)3 sols are produced by using 0.1 mol/L Al(NO3)3 ·9H2O and 0.16 mol/L (NH4)2CO3·H2O reaction solutions, according to the volume ratio 1.33, adding 0.024% (volume fraction) surfactant PEG600, and reacting at 40 ℃, 1 000 r/min stirring rate for 15 min. Then, after stabilizing for 24 h, the precursors were extracted and filtrated by vacuum, washed thoroughly with deionized water and dehydrated ethanol, dried in vacuum at 80 ℃ for 8 h, final calcined at 800 ℃ for 1 h in the air, and high purity active γ-Al2O3 nanoparticles can be prepared with cubic in crystal system, O7H-FD3M in space group, about 9 nm in crystal grain size, about 20 nm in particle size and uniform size distribution, 131.35 m2/g in BET specific surface area, 7-11 nm in pore diameter, and not lower than 99.93% in purity.     

鸡西市地表水资源量计算与分析

对鸡西市降水量、蒸发量、径流量的多年平均值及不同频率的降水量、径流量进行了分析计算。     

有机硅氧烷对硅橡胶网络的补强作用

本文通过硅氧烷水解的途径对乙烯基封端的聚二甲基硅氧烷(PDMS)在交联前后导入不变形或可变形的补强填充剂的新方法进行了研究,并此较了它们的补强性能。实验结果表明:交联后的 PDMS 网络,用四乙氧基硅烷(TEOS)水解得到的二氧化硅粒子具有最佳的补强性能,这种方法要比其他硅氧烷水解获得的补强效应大得多。实验也指出:液体硅橡胶在交联前引入的二氧化硅补强剂是完全可能的。它能形成一种稳定的橡胶一填料分散体系,并有相当的补强作用。但它的补强效应不如交联后引入补强剂的方法好。     

吉林省降水量演变情势分析

本文对吉林省降水量系列进行了深入的分析,通过对全省降水量不同空间、不同时间序列的分布规律研究计算分析,提出了吉林省降水量的演变情势.