基于数据质量评价的目标估计

针对目标估计过程需要大量人工参与、自动化程度低的问题，提出了基于数据质量评价的目标估计方法。利用目标数据质量评价方法，对不同传感器得到的目标数据质量进行科学、有效的测度和评价，并根据质量得分动态调整各数据源在目标估计过程中所占的权重，从而减少人工干预，提高目标估计效能。仿真试验结果证明了该方法的有效性。     

Presentation attack detection based on two-stream vision transformers with self-attention fusion

Aiming at the performance degradation of the existing presentation attack detection methods due to the illumination variation, a two-stream vision transformers framework (TSViT) based on transfer learning in two complementary spaces is proposed in this paper. The face images of RGB color space and multi-scale retinex with color restoration (MSRCR) space are fed to TSViT to learn the distinguishing features of presentation attack detection. To effectively fuse features from two sources (RGB color space images and MSRCR images), a feature fusion method based on self-attention is built, which can effectively capture the complementarity of two features. Experiments and analysis on Oulu-NPU, CASIA-MFSD, and Replay-Attack databases show that it outperforms most existing methods in intra-database testing and achieves good generalization performance in cross-database testing.     

Predictive process mapping for laser powder bed fusion: A review of existing analytical solutions

One of the main challenges in the laser powder bed fusion (LPBF) process is making dense and defect-free components. These porosity defects are dependent upon the melt pool geometry and the processing conditions. Power-velocity (PV) processing maps can aid in visualizing the effects of LPBF processing variables and mapping different defect regimes such as lack-of-fusion, under-melting, balling, and keyholing. This work presents an assessment of existing analytical equations and models that provide an estimate of the melt pool geometry as a function of material properties. The melt pool equations are then combined with defect criteria to provide a quick approximation of the PV processing maps for a variety of materials. Finally, the predictions of these processing maps are compared with experimental data from the literature. The predictive processing maps can be computed quickly and can be coupled with dimensionless numbers and high-throughput (HT) experiments for validation. The present work provides a boundary framework for designing the optimal processing parameters for new metals and alloys based on existing analytical solutions.     

超高分子量聚乙烯纤维增强中空蜂窝模压复合材料性能研究

为研制车船等壳体所用的轻质、高强复合板材,选用超高分子量聚乙烯(UHMWPE)短纤维纱,制备成单层经纬为120根/(10 cm)的平纹组织,采用多组经纱持续更替交织层的方法制成2L(1+0)型、4L(2+1)型、6L(3+2)型3种多层角联锁结构织物,采用扦插芯棒、模压成型方法制成菱形蜂窝状的热固性环氧树脂基中空板,并与2块真空吸液法制成的面板组成“三合一”复合板,同时测定了复合板材的结构特征及其平拉、平压和弯曲性能。结果表明:3种类型复合板的密度均远小于水的密度,其中6L(3+2)型最小,为0.48 g/cm³;复合板层数越多,环氧树脂越难渗透尤其是在中空板菱形交叉点处,复合板平拉、平压、抗弯曲强度则呈现递增,制成的6L(3+2)型复合板试样平压强度可达到1.03 MPa。     

Effect of metallurgical evolution during post-weld aging treatment on localised corrosion of resistance spot welding joints of A286 superalloy

The combined effect of resistance spot welding and precipitation hardening on the localised corrosion of A286 superalloy is studied. The specimens tested by double loop electrochemical potentiokinetic reactivation were welded in the solution treated condition, and then subjected to different precipitation hardening treatments. For both base metal and weld nugget, the maximum localised corrosion is reached when η phase is clearly observable. The fact that the localised corrosion resistance of weld nugget is different from that shown by base metal may be explained by the segregation of Ni and Ti towards the interdendritic region of weld nugget (studied by using scanning electron microscope/energy dispersive X-ray analysis).     

基于边缘和局部熵融合的视觉安全性评估方法

针对基于局部熵进行加密图像视觉安全性评估存在块效应的局限性，引入图像的边缘特征，通过共有边缘来衡量加密图像与原始图像的边缘相似度，消除了块效应。由于局部熵对加密等级低的图像不敏感，边缘相似度对加密等级高的图像不敏感，将两个评估方法进行自适应融合，提出[SLEES]（Local Entropy and Edge Similarity，[SLEES]）指标。通过改变图像像素位置和图像像素值的加密方式处理图像和视频帧进行测试，实验结果表明，[SLEES]指标相比传统评估指标有更好的鲁棒性，评估范围更广。     

全自动焊含缺陷环焊缝管段承载能力研究

为了研究全自动焊在役管线的真实承压能力，通过水压爆破试验对全自动焊含缺陷环焊缝在役管段的承载能力进行研究。研究结果表明，全自动焊焊接工艺下环焊缝缺陷主要是未熔合缺陷，且3种含未熔合缺陷管段起爆点、爆破压力、撕裂方向大致相同；含3种未熔合缺陷环焊缝管段的真实爆破压力均大于爆破压力的理论计算值，远远满足现场运行所需要的承载能力；含缺陷环焊缝的存在并没有对在役管段的整体承载能力造成影响；管段的承载能力主要取决于母材自身的材料性能。