Computerized morphometry analysis of epithelial fimbriae nuclear symmetry in BRCA carriers may identify patients at risk for developing ovarian cancer

Serous ovarian tumors may originate in epithelial cells of the fallopian tubes. Computerized morphometry was able to find significant alterations in the fallopian tube epithelium of healthy BRCA carriers. The purpose of this study was to identify a subgroup of BRCA carriers that may be at risk of developing serous ovarian cancer by evaluation of the epithelial nuclear symmetry in the fallopian tubes. Four groups of patients were analyzed; healthy patients, ovarian cancer patients, BRCA carriers, and BRCA noncarriers. All fallopian tubes appeared normal by H&E examination. The ImageProPlus software was used to assess the nuclear symmetry of 65 fimbriae epithelium cells and an artificial neural network algorithm aided in detecting a subpopulation among fimbriae of healthy BRCA carriers at risk for ovarian cancer. Significant differences were found between healthy patients and ovarian cancer patients, and between BRCA carriers and noncarriers. The algorithm was able to accurately predict BRCA carriers with associated ovarian cancer based on fallopian tube nuclear symmetry characteristics. These results reinforce the hypothesis that fimbriae epithelial cells of BRCA carriers may undergo early-stage changes that could predict the risk of progression toward malignancy.     

Stability analysis and characterization of the nano emulsified Jatropha-curcas-based bio-fuel

This work investigates the suspension duration of the nanosized multiwalled carbon nanotubes (MWCNT) and aluminum oxide (Al₂O₃) in B20, B50 and B70 blends of Jatropha Methyl ester. The MWCNT and aluminum oxide (Al₂O₃) are added to the fuel blends in the proportions of 50 and 100 pmm separately by ultra sonication. The prepared fuel samples are characterized, and turbidity analysis was done to find the stability rate of nano-additives. The outcomes reveal the maximum stability rate for MWCNT and Al₂O₃ as 83.3% and 87.03%, respectively, with 50ppm in B20 over a period of eighteen days. A considerable drop in suspension was observed with the 100 ppm MWCNT and Al₂O₃ biodiesel blends.     

内插式真空管太阳能热水器热特性理论及实验研究

设计了一种内插式真空管热水集热器,通过对其能量转换、传输特性研究,建立了内插式真空管集热器的热特性分析模型,并对不同设计参数和气候条件对内插式真空管热特性的影响进行了分析。结果表明,设计的集热器理论热效率最大可达79.5%,但其受环境温度、集热器工作温度等影响较大。此外,设计了由14只内插式真空管组成的太阳能热水器,采用迟滞算法将热水温度控制在50～55℃,实验结果表明,样机系统的日热效率可达55.0%,样机输出热水近120 kg,具有较好的实用价值。     

The effects of adding CNTs and GNPs on the microstructure and mechanical properties of hexagonal-boron nitride

This present work investigated the mechanical properties and microstructure of h-BN based ceramic composites reinforced with CNTs and GNPs. Accordingly, two different batches of pure h-BN, h-BN/0.1 wt%CNTs and h-BN/0.1 wt% GNPs were prepared through a high energy mixer mill to gain a uniform dispersion of reinforcement with the initial stable CNTs or GNPs solution in ethanol. After drying the mixtures, the pure h-BN and also, two different composite components were directly inserted into the graphite mold and the sintering process was performed with the initial and final pressure of 10 and 50 MPa, respectively, at 1900 °C, under the vacuum condition of 15–35 Pa. The relative density of the samples was calculated based on the Archimedes principle. The densification behavior of the samples showed the maximum amount of 98.31% for the theoretical density of the h-BN/GNPs composite. On the other hand, the minimum relative density of 96.41% was obtained for the h-BN/CNTs composite. The microstructure studies of the prepared sample showed the uniform distribution of GNPs in the h-BN layers; however, when the CNTs were added, some agglomerated area was found. Moreover, the fracture surface of all samples showed a laminar fracture as a result of the layer-by-layer structure of h-BN. The investigation of the mechanical properties of the prepared specimens also revealed the highest bending strength, fracture toughness and Vickers hardness of 199 MPa, 1.26 GPa and 3.62 MPa m^−1/2, respectively, which belonged to the h-BN/GNPs composite. In the case of CNTs, this trend exhibited lower amounts, probably due to the agglomeration of CNTs.     

Experimental investigation and analysis of composite silica-gel coated fin-tube heat exchangers

Desiccant coated heat exchanger provides a promising option for desiccant cooling system, since it can handle sensible load and latent load simultaneously within one component. It is fabricated by coating desiccant material on the surface of conventional fin-tube heat exchanger. In order to enhance the performance of conventional silica gel coated heat exchanger (SGCHE), a novel composite silica gel coated heat exchanger (CCHE) is proposed and fabricated. An experimental setup is built to test and compare the dynamic performance of SGCHE and CCHE. Influences of main operation parameters including water temperatures and inlet air conditions on system performance are analyzed in terms of average dehumidification capacity (D_avg) and thermal coefficient of performance (COP_th). Optimization of cycle switch modes is also discussed. Experimental results show that CCHE has better dehumidification performance compared with SGCHE. In addition, pre-cooling before dehumidification process is found to be advantageous to both D_avg and COP_th.     

Development and validation of a micro-fin tubes evaporator model using R134a and R1234yf as working fluids

This paper presents a model of shell and tube evaporator with micro-fin tubes using R1234yf and R134a. The model developed for this evaporator uses the ε-NTU method to predict the evaporating pressure, the refrigerant outlet enthalpy and the outlet temperature of the secondary fluid. The model accuracy is evaluated using different two-phase flow boiling correlations for micro-fin tubes and comparing predicted and experimental data. The experimental tests were carried out for a wide range of operating conditions using R134a and R1234yf as working fluids. The predicted parameter with maximum deviations, between the predicted and experimental data, is the evaporating pressure. The correlation of Akhavan– Behabadi et al. was used to predict flow boiling heat transfer, with an error on cooling capacity prediction below 5%. Simulations, carried out with this validated model, show that the overall heat transfer coefficient of R1234yf has a maximum decrease of 10% compared with R134a.     

轧制速度对AZ31镁合金管材冷轧成形的影响

轧制速度是三辊式冷轧成形过程中关键的工艺参数，决定其力学特征及温升情况。基于此，本文以冷轧AZ31镁合金管材为研究对象，通过全流程数值仿真计算，对比分析不同轧制速度在各特征变形段对等效应力、等效塑性应变及节点温度的影响规律。结果表明，等效应力、等效塑性应变及节点温度均随轧制速度的增大而增大。通过元胞自动机模型及实验等手段，探明了晶粒在轧制过程中产生连续再结晶并细化的初步组织演变规律；对比分析实验与模拟结果并结合多方面因素，得到800mm/s的轧制速度可以更好的满足工艺要求的结果，为冷轧镁合金管材轧制速度的选择提供依据。     

Constructal design of flat tubes cooled by natural convection

A set of vertical flat tubes cooled by natural convection and placed in a finite size space is designed based on the constructal law. The constraint in this design is the size of the space where the tubes are placed. The freedom inside the space is the distance between the tubes. When the constructal law is applied, the optimal distance between the tubes is determined. Rayleigh numbers are taken as (Ra = 10³, 10⁴, and 10⁵). The dimensionless tube diameter (tube diameter/tube height) is changed from (D* = 0.2) to (D* = 1) (circular tube). All the tubes are heated to the same wall temperature. The air used to cool the tubes has a Prandtl number (Pr = 0.72). The equations of conservation of mass, momentum, and energy for steady, two-dimensional, and incompressible flow are solved by the finite volume method. The result showed that the best or optimal distance at a given Rayleigh number remains constant for all tube diameters. The result also showed that the number of the small diameter tubes must be more than the number of the large-diameter tubes for the same Rayleigh number and the same size of the space to make the heat flow from the tubes to the coolant easier.     

交流阻抗法在凝汽器黄铜管腐蚀研究中的应用

探讨交流阻抗法研究凝汽器黄铜管在循环冷却水系统中的腐蚀问题.采用热电厂实际使用的黄铜管制作管状传感器,利用交流阻抗法在同种材料三电极体系电解池中测量传感器的电化学阻抗谱,并与经典三电极体系电解池下的数值作比较.结果表明,实验室数据与现场测试数据基本吻合,交流阻抗法可以提供凝汽器黄铜管在循环冷却水系统中的年腐蚀速率和极化电阻,帮助现场工作人员及时了解凝汽器黄铜管的腐蚀状况.交流阻抗法可以有效地评定黄铜管的耐腐蚀性能,为现场腐蚀监测,进而指导生产提供了有益信息.     

嵌岩桩嵌岩段侧摩阻力浅析

为求出嵌岩桩嵌岩段侧摩阻力的表达式,假定嵌岩桩桩侧破坏由桩岩接触面上的滑动引起,桩岩接触面的压力由加载前岩土层自重产生的侧压力和由剪切膨胀产生的应力增量组成.用弹性力学的方法求解出桩侧正应力,引入了岩石破坏的Hoek-Brown强度准则,由此求出了嵌岩段桩侧阻力的表达式,并指出了此公式的适用范围.最后结合工程实际进行了对比分析,表明本文方法具有一定的实用性.