IC塔沼气燃烧系统开车调试总结

通过参加伊朗造纸项目废水车间IC塔沼气燃烧系统开车调试总结,介绍了IC塔沼气燃烧系统主要设备及投料试车、控制联锁及调试期间注意事项等。     

Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters

In recent years, remarkable advancement of new power semiconductor devices, such as SiC and GaN, enables the increase of switching frequency of power converters, and hence the volume of passive components, such as ac filters and transformers, can be reduced. However, temperature rise caused by the inductor loss is increasing, and hence iron loss evaluation of the inductor is one of the most important issues to realize high power density converters. Conventionally, an improved generalized Steinmetz equation (iGSE) has proposed in order to calculate the iron loss under a pulse voltage magnetizing condition. However, accurate iron loss calculation of the ac filter inductor used in a PWM inverter cannot be realized. The authors have proposed two methods of iron loss evaluation of ac filter inductors. The first one is a loss map method which can calculate the iron loss without using a real PWM inverter. Another one is an ILA (Inductor Loss Analyzer) which can measure the iron loss in every switching period in a real PWM inverter. In this paper, comparisons of the iron loss between the ILA and the loss map method on both the single‐phase and three‐phase inverters are studied. It is found that iron loss of the ac filter inductor in the three‐phase PWM inverter which is calculated by the loss map method cause a large error on a specific condition. In order to prevent the calculation error, the authors proposed a revised loss map method and proved the effectiveness of the method.     

Boost converter with adaptive reference tracking control for dimmable white LED drivers

An LED driver consisting of dimmable current regulators and a boost converter with adaptive reference tracking control (ARTC) is proposed. The ARTC is realized with only one integrator and one subtractor to detect the voltage variation among the current regulators and then to generate an adaptive reference tracking voltage. Based on the reference tracking voltage, the driving voltage of the boost converter is dynamically adjusted, so as to not only maintain a minimum voltage on the current regulator but also keep the required LED-string current. A prototype control circuit including ARTC and PWM control fabricated with TSMC 0.35-μm 2P4M CMOS process validates the proposed technique. The measurement results show that the driving voltage of the boost converter is automatically regulated to compensate for the voltage alteration on the current regulators. Furthermore, the overall efficiency of the LED driver with ARTC is 6.1% better than that of the LED driver without ARTC.     

Integrated circuit and system design for renewable energy inverters

This study proposes that a novel integrated circuit (IC) and system design for renewable energy inverters can harvest renewable energy to power direct current (DC) and alternating current (AC) loads. In addition, an intelligent synthesis and management tool is developed to design the proposed system and to judge the system’s operational maintenance decisions. Finally, a renewable energy inverter’s information is posted to an online system. Users can obtain the proposed system’s information at any time and place. The accurate and superior performance of the proposed IC and system is confirmed by computer simulations and experimental results.     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

Methodology for robust multi-parametric control in linear continuous-time systems

This paper presents an extension of the recent multi-parametric (mp-)NCO-tracking methodology by Sun et al. [Comput. Chem. Eng. 92 (2016) 64–77] for the design of robust multi-parametric controllers for constrained continuous-time linear systems in the presence of uncertainty. We propose a robust-counterpart formulation and solution of multi-parametric dynamic optimization (mp-DO), whereby the constraints are backed-off based on a worst-case propagation of the uncertainty using either interval analysis or ellipsoidal calculus and an ancillary linear state feedback. We address the case of additive uncertainty, and we discuss approaches to dealing with multiplicative uncertainty that retain tractability of the mp-NCO-tracking design problem, subject to extra conservativeness. In order to assist with the implementation of these controllers, we also investigate the use of data classifiers based on deep learning for approximating the critical regions in continuous-time mp-DO problems, and subsequently searching for a critical region during on-line execution. We illustrate these developments with the case studies of a fluid catalytic cracking (FCC) unit and a chemical reactor cascade.     

A New Design Methodology for Time-Based Capacitance-to-Digital Converters (T-CDCs)

This paper introduces a 9-bit time-based capacitance-to-digital converter (T-CDC). This T-CDC adopts a new design methodology for parasitic cancellation with a simple calibration technique. In T-CDCs, the input sensor capacitance is first converted into a delay pulse using a capacitance-to-time converter (CTC) circuit; then this delay signal is converted into a digital code through a time-to-digital converter (TDC) circuit. A prototype of the proposed T-CDC is implemented in UMC 0.13 μm CMOS technology. This T-CDC consumes 8.42 μW and achieves a maximum SNR of 45.14 dB with a conversion time of 1 μs that corresponds to a figure of merit (FoM) of 16.4 fJ/Conv.     

楼栋调压器出口压力波动的探讨

根据实测数据探讨了楼栋调压器出口压力的波动情况。