对“垃圾衍生燃料”RDF之探析

当前,我国水泥工业在可燃废弃物应用技术方面都还处于一家一户、自制自用、效率极低的初级阶段。发达国家的替代燃料:“垃圾衍生燃料”RDF、“固体回收燃料”SRF、“次煤”Subcoal和“纸塑垃圾衍生燃料”RPF制成的原材料都是可燃废弃物,只是处理工艺技术不同或者由垃圾中分拣出的可燃废弃物不同,制成颗粒状衍生燃料的品质不同,这些都可以替代部分甚或替代全部化石燃料在水泥窑炉中应用。我国大力发展“替代燃料”产业,有助于水泥工业消纳更多的“可燃废弃物”,为改善环境尤其是城镇环境和面貌,为我国的节能减排和绿色高质量发展发挥更大的作用。     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

基于“炉机对应”原则的连浇优化方案

国内某炼钢厂为保证浇注周期较短的2号连铸机连浇，多座转炉需同时向该连铸机供应钢水，导致炉 机对应关系不明确，生产组织难度较大。通过对该厂炼钢 连铸过程的工序作业周期与生产运行模式进行解析，在保证连铸机连浇的基础上，探究合理的炉 机对应关系，改善该厂的生产顺行。结果表明，在“一一对应”运行模式下，2号连铸机最大连浇炉数仅为6炉；而在“定炉对定机”运行模式下，若适时接受3号转炉冶炼的钢水，2号连铸机最大连浇炉数可延长至19炉。在此基础上，通过对连铸机“柔性”的优化和钢水供应的合理调配，2号连铸机可满足实际生产的连浇要求。此外，运用“炉→机”匹配度进行评价，计算结果表明优化后的炉 机对应关系得到显著改善。     

转底炉处理赤泥工艺技术

为了综合利用氧化铝冶炼产生的赤泥，探索在转底炉中直接还原赤泥、磨矿磁选获得高品位直接还原铁。通过实验室试验摸索了转底炉还原工艺参数，并在转底炉工业试验线进行了工业试验。实验室结果表明，赤泥还原后的直接还原铁(DRI)金属化率可达88.6%，磁选后的铁品位可达82.1%，磁选后的铁回收率可达88.9%。工业试验中，转底炉还原后，产品金属化率平均为69.2%，将还原后的DRI磁选获得高品位的DRI产品，磁选后DRI的铁品位为72.8%，磁选后铁回收率达到了85.2%,初步打通了在转底炉中还原赤泥、磁选的工艺路径。     

Research on slag-resistance of ZrN-SiAlON-SiC-C composite refractory in different atmospheres

The ZrN-SiAlON composite powder was synthesized using low-grade zircon and bauxite by carbothermal reduction nitridation at first and then ZrN-SiAlON-SiC-C composite refractory were fabricated with the ZrN-SiAlON powder, SiC particles, and a small amount of Si powder as raw materials and sucrose as the binder. The slag resistance of these composites in O₂, N₂ and Ar atmosphere was investigated by X-ray diffraction, scanning electron microscopy, and energy dispersion spectra. The results show that the pores in the inside of ZrN-SiAlON-SiC-C composite refractory were enlarged in oxygen atmosphere due to oxidation, which leads to the decrease in slag resistance. In argon atmosphere, blast furnace slag destroyed the sintered body of zircon, corundum, and cristobalite with the formation of CaZrO₃, then infiltrated into and filled the pores inside the refractory to form a dense layer, which hindered the further erosion of the blast furnace slag. In the reducing atmosphere, the interfacial energy of the gas-liquid phases became larger due to the reactions between blast furnace slag liquid and the gas, resulting in a larger wetting angle which prevented the erosion.     

延迟焦化装置加热炉理论配比燃烧优化技术

加热炉是焦化装置的主要耗能设备,本文为降低装置能耗,提出加热炉技术改造方案,烟气新增CO在线分析仪,通过对CO的控制来实现燃料和空气的最佳配比,提高加热炉的热效率。     

高炉瓦斯灰泥铅锌铁综合利用磁化焙烧条件研究

为了确定新钢高炉瓦斯灰泥中铅锌铁回收的焙烧工艺条件，进行了磁化焙烧温度、焙烧时间、无烟煤用量和料层厚度条件试验，并在条件试验确定的参数基础上进行了组合微调优化。结果表明，在焙烧温度为1 120 ℃、焙烧时间为3.5 h、无烟煤用量为25%、料层厚度为35 mm情况下，铅、锌回收率分别超过86%和93%，磁选铁精矿铁品位超过63%、铅锌总含量不超过0.4%、铁回收率超过81%，达到了国家“863”任务书规定的各项技术指标要求。     

用于低损耗特种玻璃熔炼的高纯致密锆英石的研制

以纯度大于99.9%(质量分数)的高纯ZrO₂和SiO₂为原料,少量TiO₂为添加剂,采用高温固相法合成高纯锆英石(ZrSiO₄)粉料。研究温度和反应时间对高纯锆英石合成效率的影响,发现粒度小于50 μm的原料粉末经1 500 ℃反应48 h后,ZrSiO₄相的含量可以达到95.77%(质量分数)。将合成的高纯锆英石粉料球磨并冷等静压成型后,在1 550 ℃高温烧结成高纯致密锆英石砖。高纯致密锆英石中杂质Fe的含量仅为29 μg/g,Cu的含量小于1 μg/g,是普通商用致密锆英石的1/10;对磷酸盐玻璃静态光吸收损耗的影响仅为普通致密锆英石材料的1/3。将这种高纯致密锆英石材料用于激光玻璃窑炉,有助于降低玻璃对1 053 nm激光的损耗,提升激光玻璃的激光性能。     

基于热负荷自动调节的延迟焦化加热炉三点注汽量智能优化

针对国内某炼油厂延迟焦化加热炉三点注汽问题，采用热负荷自动调节的算法进行了研究。运用该模型方法，分析了三点注汽量对加热炉热负荷和炉管结焦系数的影响，发现三点注汽量的改变均会对热负荷和炉管结焦系数产生影响，主要表现为提高注汽量将会提高热负荷，同时降低结焦系数；第1点注汽量和第2点注汽量对热负荷和结焦系数的影响较强，第3点注汽量对热负荷和结焦系数的影响较弱。在实际操作中，加热炉中的结焦程度既不能太强也不能太弱，合适的结焦系数能够保证正常开工周期里炉管不结焦，也能保证瓦斯、注汽量等参数的合理分配。通过对热负荷、注汽量的智能分配，可得到不同原料油加工负荷条件下更加合理的装置运行方案。     

关于电石炉散点除尘灰在热电脱硫装置的应用研究

通过对散点除尘灰的成分进行分析,并结合生产实际,提出将散点除尘灰在干法及湿法脱硫系统使用,既有效利用了生产固废,又节省了生产成本。