基于平均飞行航迹的CCO减噪效用研究

近年来，通过优化飞行程序降低机场飞机噪声影响成为机场环境保护的重要研究方向。文章首先建立了基于飞机“噪声-功率-距离”数据的噪声计算模型，介绍了平均飞行航迹以及连续爬升运行(Continuous Climb Opera-tion, CCO)离场程序的相关理论，最后以大型国际机场为实例，使用飞机平均飞行航迹进行噪声预测，运用综合噪声模型计算出噪声影响面积并绘制噪声影响等值线图，比较了CCO离场相对常规的标准仪表离场(Standard Instru-ment Departure, SID)的降噪效果。结果表明，CCO离场程序可有效降低机场噪声影响，在高噪声级影响区域的降噪效果更佳。     

Tuning of shear thickening behavior and elastic strength of polyvinylidene fluoride via doping of ZnO-graphene

ZnO rice like nonarchitects are grafted on the graphene carbon core via a rapid microwave synthesis route. The prepared grafted systems are characterized via XRD, SEM, RAMAN, and XPS to examined the structural and morphological parameters. Zinc oxide grafted graphene sheets (ZnO-G) are further doped in β-phase of polyvinylidene fluoride (PVDF) to prepare the polymer nanocomposites (PNCs) via mixed solvent approach (THF/DMF). β-phase confirmation of PVDF PNCs is done by FTIR studies. It is observed that ZnO-G filler enhances the β-phase content in the PNCs. Non-doped PVDF and PNCs are further studied for rheological behavior under the shear rate of 1–100 s⁻¹. Doping of ZnO-G dopant to the PVDF matrix changes its discontinuous shear thickening (DST) behavior to continues shear thickening behavior (CST). Hydrocluster formation and their interaction with the dopant could be the reason for this striking DST to CST behavioral change. Strain amplitude sweep (10⁻³% -10%) oscillatory test reveals that the PNCs shows extended linear viscoelastic region with high elastic modulus and lower viscous modulus. Effective shear thickening behavior and strong elastic strength of these PNCs present their candidature for various fields including mechanical and soft body armor applications.     

面向连续查询的敏感语义位置隐私保护方案

针对连续查询位置服务中构造匿名区域未考虑语义位置信息导致敏感隐私泄露问题，通过设计[(K,θ)]-隐私模型，提出一种路网环境下面向连续查询的敏感语义位置隐私保护方案。该方案利用Voronoi图将城市路网预先划分为独立的Voronoi单元，依据用户的移动路径和移动速度，选择具有相似特性的其他[K-1]个用户，构建匿名用户集；利用匿名用户集用户设定的敏感语义位置类型和语义安全阈值，以及用户所处语义位置的Voronoi单元，构建满足[(K,θ)]-隐私模型的语义安全匿名区域，可以同时防止连续查询追踪攻击和语义推断攻击。实验结果表明，与SCPA算法相比，该方案在隐私保护程度上提升约15%，系统开销上降低约20%。     

埋地金属管道高压连续复合软管内衬修复技术研究与现场应用

针对服役时间长、长距离穿越季节性水域的埋地金属管道修复施工难题,开展了高压连续复合软管内衬修复技术研究与试验应用。高压连续复合软管由内衬层、增强层、保护层三部分组成,管道中间断管处接头连接方式为包裹连接,端部的连接方式为法兰碰头连接。结果表明:DN100/PN6.0管材平均爆破强度11.8 MPa,轴向拉伸强度192 kN,维卡软化温度77.3℃;建立的工艺计算方法可用于配套设备选型和施工长度设计,理论计算轴向拉伸强度192 kN,理论最大直线施工长度5.0 km,现场应用最大施工长度1.9 km;施工流程中管道清洗、焊瘤检测、扭矩释放是施工作业流程的关键控制点。该技术可提高施工时效50%,节省工程费用20%~30%。     

Methodology for optimization of pouring variables using bottom pour for low masses of SS304 (<300 kg) in investment casting process (case study)

Bottom pour ladles with stopper rod systems are commonly used in the metal casting industry. However, stopper rod bottom-pouring systems have not yet been developed for the lower thermal masses of alloys typically used in the investment casting industry. Large thermal masses used with bottom pour systems are typically limited for ladles larger than 700 kg and to certain alloys with higher fluidity and longer solidification time like cast iron, aluminum alloys etc. In this study, bottom pour ladle designs and low thermal mass refractory systems have been developed and evaluated in production investment foundry trials with 300 kg pouring ladle. The ladles system and pouring practices used will be described along with the results from the pouring trials for SS304 that represents typical alloys used in Investment casting industries. Optimization of the variables used in an experimentation using Genetic algorithm is also explained.     

鄂尔多斯盆地杭锦旗东部地区上古生界天然气成藏模式

为了弄清鄂尔多斯盆地杭锦旗地区上古生界天然气成藏模式，用以指导该区的油气勘探，从烃源岩分布、天然气运移及圈闭分布特征等角度展开深度剖析，总结了该区的油气成藏模式。结果表明：该区烃源岩呈南厚北薄的展布特征，泊尔江海子断裂以南地区烃源岩成熟度高于断裂以北地区；区内构造圈闭主要分布在泊尔江海子断裂北部地区（什股壕地区）；泊尔江海子断裂以南地区天然气密度大于北部地区，整体呈现由南向北逐渐降低的趋势，而天然气干燥系数则整体由南向北逐渐增大，反映了缺少烃源岩的什股壕地区天然气主要由泊尔江海子断裂以南地区运移而来；泊尔江海子断裂以南地区发育优质的烃源岩，天然气高密度、低干燥系数的分布特征表明了该区域天然气为原地聚集；阿镇地区断裂及伴生构造圈闭成为该区油气运移的通道和聚集场所，十里加汗地区普遍不发育断裂，在砂岩储层物性的控制作用下，形成了近源天然气藏；杭锦旗东部地区上古生界天然气成藏模式划分为3类，即横向远距离运移异地成藏模式、垂向近距离运移原地成藏模式和准连续致密砂岩气成藏模式。该研究成果为杭锦旗地区下一步勘探指明了方向。     

Simulation of vacuum distillation to produce alcohol-free beer

Several processes have been developed for producing alcohol-free beer while maintaining desirable sensory characteristics. One of the most popular thermal processes used is distillation, where not only ethanol but volatile aromatic components are partly or completely removed from the beer. Based on data from the literature and using the Aspen Plus simulator, this study evaluates and compares the aroma profiles of alcohol-free beers obtained by continuous vacuum distillation with different pressures and processes. Three processes were simulated at pressures of 60, 102, and 200 mbar. The first (Process A) was a standard continuous vacuum distillation, where the bottom product was an alcohol-free beer. In the second (Process B), the bottom product was blended with a standard beer that had not undergone any thermal process. In the third (Process C), part of the top stream was mixed with the bottom product. This study considered eight major compounds in beer: ethanol, propanol, isobutanol, 2-methyl-1-butanol, 3-methyl-1-butanol, ethyl acetate, diacetyl and isoamyl acetate. The three simulated pressure ranges showed similar results, indicating that reducing the pressure below 200 mbar did not improve separation. Further, vacuum distillation did not remove diacetyl from the beer. Processes B and C resulted in beer that was richer in flavour compounds. Furthermore, when these processes were compared to Process A, the concentration of esters was markedly higher. © 2019 The Institute of Brewing & Distilling     

高伸长率冷轧双相钢DP980显微组织及性能

摘要：为了进一步提高冷轧双相钢DP980的强塑性，采用低C-Si-Mn-Nb-Cr成分，通过调整连续退火工艺参数，系统研究了工艺组织性能的关系，利用OM、SEM、EBSD分析了不同退火温度条件下各相的比例、尺寸、形貌、分布，同时利用力学拉伸试验手段研究了连退两相区退火温度对强塑性的影响。结果表明，通过优化调整连续退火工艺，不仅可以在冷轧铁素体和马氏体双相钢的组织上获得少量的残余奥氏体，也能细化再结晶晶粒，最终获得ReL/Rm≤0.5、高伸长率A50≥15%的冷轧DP980，提高强塑性的同时改善了成型性能。     

耐蚀合金中TiN析出机制

摘要：TiN颗粒尺寸及其分布对耐蚀合金性能有明显的影响，因此有必要对TiN在铸坯中的分布及其析出行为进行研究。采用扫描电镜(SEM)、金相显微镜（OM）观察了TiN夹杂物在铸坯中的分布、尺寸及其形貌；基于热力学和动力学理论分析了耐蚀合金铸坯中TiN夹杂物的析出时机及其尺寸，结合试验结果和理论计算明确了TiN夹杂物在凝固后铸坯中的位置和尺寸与析出时机的关系，为控制TiN夹杂物提供理论指导。结果表明，冶炼过程中析出的TiN夹杂物尺寸较大，在凝固过程中被枝晶吞没，位于铸坯枝晶内和等轴晶内；微观偏析计算结果表明，在凝固分数为0.55时，TiN开始析出，最开始析出TiN夹杂物的逐渐长大，长大后的TiN易于被二次枝晶吞没，最终位于铸坯中的枝晶间和等轴晶内，后期析出的TiN则在枝晶间和等轴晶间。固相中析出的TiN夹杂物长大较慢，尺寸细小，最终位于奥氏体晶界。