Thermal transport and chemical conversion in single reacting sorbent particles

The effects of particle size and carbon dioxide concentration on chemical conversion in engineered spherical particles undergoing calcium oxide looping are investigated. Particles are thermochemically cycled in a furnace under different carbon dioxide concentrations. Changes in composition due to chemical reactions are measured using thermogravimetric analysis. Gas composition at the furnace exit is evaluated with mass spectroscopy. A numerical model of thermal transport phenomena developed previously is adapted to match the physical system investigated in the present study. The model is used to elucidate effects of reacting medium characteristics on particle temperature and reaction extent. Experimental and numerical results show that (1) an increase in particle size results in a decrease in carbonation extent, and (2) the carbonation step consists of fast and slow reaction regimes. The reaction rates in the fast and slow carbonation regimes increase with increasing carbon dioxide concentration. The effect of carbon dioxide concentration and the distinction between the fast and slow regimes become more pronounced with increasing particle size.     

Structural dependence of microwave dielectric properties in ilmenite-type Mg(Ti1-xNbx)O3 solid solutions by Rietveld refinement and Raman spectra

Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics were prepared by the conventional solid-state reaction method. The phase composition, sintering characteristics, microstructure and dielectric properties of Ti⁴⁺ replacement by Nb⁵⁺ in the formed solid solution Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics were systematically studied. The structural variations and influence of Nb⁵⁺ doping in Mg(Ti_1-xNb_x)O₃ were also systematically investigated by X-ray diffraction and Raman spectroscopy, respectively. X-ray diffraction and its Rietveld refinement results confirmed that Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics crystallised into an ilmenite-type with R-3 (148) space group. The replacement of the low valence Ti⁴⁺ by the high valence Nb⁵⁺ can improve the dielectric properties of Mg(Ti_1-xNb_x)O₃ (x = 0–0.09). This paper also studied the different sintering temperatures for Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics. The obtained results proved that 1350 °C is the best sintering temperature. The permittivity and Q × f initially increased and then decreased mainly due to the effects of porosity caused by the sintering temperature and the doping amount of Nb₂O₅, respectively. Furthermore, the increased Q × f is correlated to the increase in Ti–O bond strength as confirmed by Raman spectroscopy, and the electrons generated by the oxygen vacancies will be compensated by Nb⁵⁺ to a certain extent to suppress Ti⁴⁺ to Ti³⁺, which was confirmed by XPS. The increase in τ_f from ?47 ppm/°C to ?40.1 ppm/°C is due to the increment in cell polarisability. Another reason for the increased τ_f is the reduction in the distortion degree of the [TiO₆] octahedral, which was also confirmed by Raman spectroscopy. Mg(Ti_0.95Nb_0.05)O₃ ceramics sintered at 1350 °C for 2 h possessed excellent microwave dielectric properties of ε_r = 18.12, Q × f = 163618 GHz and τ_f = ?40.1 ppm/°C.     

Preparation of high-strength silica aerogels by two-step surface modification via ambient pressure drying

Journal of Porous Materials - High-strength silica aerogels were prepared successfully by a new two-step surface modification (TSSM) method via ambient pressure drying (APD). Methyltrimethoxysilane...     

我国天然气储气调峰体系发展现状及展望

介绍储气调峰技术的分类与特点,简述我国调峰体系的发展近况,剖析构建中国特色储气调峰体系的必要性和该系统中尚存的关键难题,着重汇总国内眼下调峰体系的主要应对策略与建议,最后提出从规划布局、运营模式、体制机制及政策支持等多方面下手,弥补我国天然气消费增长的短板,以求更大范围地满足用户的调峰需求,全面提升国家用气旺季削峰与移峰能力的建设性意见.     

机电安装技术在大跨度玻璃穹顶建筑工程中的应用

北京某文旅项目201单体为造型复杂的大跨度玻璃穹顶建筑,其机电管线和灯具在穹顶水平环梁和主拱梁上安装难度极大.经研究采用综合支架、合理规划路由等措施,满足了设计和使用要求.     

A twofold interpenetrating 3D brick-wall MOF based on a new semi-rigid tridentate ligand: synthesis,structure, and selective CO2 adsorption

Journal of Porous Materials - Based on a new semi-rigid tridentate azole ligand, a porous metal–organic framework (MOF), {[Ni3(tmpa)2(bdc)3]·6DMF}n (1)...     

Er3+-Yb3+ ions doped fluoro-aluminosilicate glass-ceramics as a temperature-sensing material

The transparent Er³⁺-Yb³⁺-doped fluoro-aluminosilicate glass-ceramic (GC) was prepared by melt-quenching. The crystal phase, morphology, and up-conversion (UC) luminescence of as-produced GC were characterized by X-ray diffraction, scanning electron microscopy, and fluorescence spectrophotometry, respectively. The results show that BaYF₅ nanocrystals were uniformly distributed in the glass matrix of the as-produced GC. When the as-produced GC was subjected to heat treatment, the crystallinity was increased, but the crystal identity remains unchanged. Such heat-treatment doubled the intensity of the UC luminescence, and this enhancement was ascribed to the increased incorporation of both Er³⁺ and Yb³⁺ ions into the lower phonon energy environment of BaYF₅ nanocrystals. Furthermore, the heat-treated GC was stable against further crystallization, and consequently its UC luminescence was stable at the application temperature. The heat-treated GC was found to possess an outstanding temperature-sensing capability.     

基于可穿戴传感器数据的人体行为识别数据特征提取方法

随着可穿戴设备的发展与普及,基于可穿戴传感数据进行人体行为检测展现了巨大的研究价值.目前大多人类行为识别工作都是基于视频图像展开的,然而,使用计算机视觉技术进行人类行为识别存在2个挑战:一是很难使参与数据采集的人员在自然状态下采集真实状态下的运动数据,在开展数据采集之前往往需要对参与数据采集的人员进行培训并严格规范其采集动作,最终得到的数据将是背离真实生活的数据,其研究价值将大打折扣;二是数据采集过程中还涉及采集人员的隐私保护问题.为此,提出一种基于深度学习的数据特征提取方法.首先在灵活设置卷积核的基础上引入神经网络的分支结构多尺度提取原始数据的深度特征;然后将各分支得到的数据特征进行融合并作为下一个卷积层的输入.实验结果表明,与目前主流方法相比,该方法在MHEALTH,WHARF和USCHAD这3个标准数据集上的准确率和召回率都取得了更好的效果.此外,该方法还在2个较新数据集Stanford-ECM Dataset和DATAEGO上做了验证,结果表明该方法具有较好的泛化能力.