Genetic Deficiency and Pharmacological Stabilization of Mast Cells Ameliorate Pressure Overload-Induced Maladaptive Right Ventricular Remodeling in Mice

Although the response of the right ventricle (RV) to the increased afterload is an important determinant of the patient outcome, very little is known about the underlying mechanisms. Mast cells have been implicated in the pathogenesis of left ventricular maladaptive remodeling and failure. However, the role of mast cells in RV remodeling remains unexplored. We subjected mast cell-deficient WBB6F1-KitW/W-v (Kit^W/Kit^W-v) mice and their mast cell-sufficient littermate controls (MC^+/+) to pulmonary artery banding (PAB). PAB led to RV dilatation, extensive myocardial fibrosis, and RV dysfunction in MC^+/+ mice. In PAB Kit^W/Kit^W-v mice, RV remodeling was characterized by minimal RV chamber dilatation and preserved RV function. We further administered to C57Bl/6J mice either placebo or cromolyn treatment starting from day 1 or 7 days after PAB surgery to test whether mast cells stabilizing drugs can prevent or reverse maladaptive RV remodeling. Both preventive and therapeutic cromolyn applications significantly attenuated RV dilatation and improved RV function. Our study establishes a previously undescribed role of mast cells in pressure overload-induced adverse RV remodeling. Mast cells may thus represent an interesting target for the development of a new therapeutic approach directed specifically at the heart.     

Performance of two shrouded probes for the collection of liquid aerosols in a wind tunnel optimized for high air speeds

Abstract

A combination of type A (high flow model) or B (low flow model) shrouded probe and appropriate isokinetic air-sampler (IAS) was tested in a wind tunnel that was optimized for high air speed testing using computational flow modeling. Liquid uranine aerosols (LUA) with AED (aerodynamic equivalent diameter) of 10?μm were generated at a constant flow rate using a vibrating orifice aerosol generator. The monodispersed aerosols were introduced into a wind tunnel at speeds of 5, 10, 15 and 20?m/s. The high flow (A) or low flow (B) model shrouded probe and the appropriate isokinetic air-sampler (IAS) was co-located to collect the LUA simultaneously during each treatment. After the test, the LUA deposited on the filters and inside the walls of the two air-samplers were collected and analyzed for fluorescence intensity units to determine the wall loss, transmission and aspiration ratios. While the type B shrouded probe had 20% (at 10?m/s) and 14.3% (at 15?m/s) higher wall loss ratios than model A, it had 16.1% (at 10?m/s) and 11.6% (at 15?m/s) higher transmission ratios compared to model A. Similarly, probe B had 17.6% (at 10?m/s) and 14.6% (at 15?m/s) higher aspiration ratios than probe A at similar air velocities. Overall, the wall loss, transmission and aspiration ratios of 10?µm AED ULA measured with two types of shrouded probes at 5, 10, 15 and 20?m/s air velocities in the optimized wind tunnel had good agreement with the range of standard data.

Copyright © 2020 American Association for Aerosol Research     

Supply chain data analytics for predicting supplier disruptions: a case study in complex asset manufacturing

Although predictive machine learning for supply chain data analytics has recently been reported as a significant area of investigation due to the rising popularity of the AI paradigm in industry, there is a distinct lack of case studies that showcase its application from a practical point of view. In this paper, we discuss the application of data analytics in predicting first tier supply chain disruptions using historical data available to an Original Equipment Manufacturer (OEM). Our methodology includes three phases: First, an exploratory phase is conducted to select and engineer potential features that can act as useful predictors of disruptions. This is followed by the development of a performance metric in alignment with the specific goals of the case study to rate successful methods. Third, an experimental design is created to systematically analyse the success rate of different algorithms, algorithmic parameters, on the selected feature space. Our results indicate that adding engineered features in the data, namely agility, outperforms other experiments leading to the final algorithm that can predict late orders with 80% accuracy. An additional contribution is the novel application of machine learning in predicting supply disruptions. Through the discussion and the development of the case study we hope to shed light on the development and application of data analytics techniques in the analysis of supply chain data. We conclude by highlighting the importance of domain knowledge for successfully engineering features.     

Excellent destabilization effect and ideal desorption temperature in the hydride Mg2FeH6 substituted with yttrium; a first principles study

We investigated some properties of the hydride Mg₂FeH₆ substituted with yttrium by a first principles calculation. Some experimental results showed that 4d transition metal, yttrium serves as a good catalyst for magnesium based hydrogen storage alloys, but there are a few theoretical studies about magnesium based hydrides substituted with it. Mg₂FeH₆ is regarded as a cheaper material than pure MgH₂, while it is crystalized into Fm3m structure (space group 225). Although it has high hydrogen storage capacity, many investigations have not been devoted to it due to its extremely high thermodynamic stability. The yttrium substituted Mg₂FeH₆ exhibits very low energy of formation, and its desorption temperature, 75 °C is very suitable for practical hydrogen storage applications. Our results showed that Mg₂FeH₆ is destabilized effectively by yttrium substitution and introducing vacancy defects has additive effect to the improvement of dehydrogenation performance.     

Interfacing perovskite strontium molybdate to molybdenum disulfide nanoplatelts for boosting HER from water

Due to low hydrogen adsorption free energy at the edges of 2D-MoS₂ layered sheets, nanostructured MoS₂ materials recently are assigned to prospective electrocatalysts for hydrogen evolution reaction (HER) from water. However, the efficiency and stability of HER onto the MoS₂ designed on the conductive substrates are poor. To significantly increase the number of active sites and achieve a long-time working stability, the design of hybrid-type electrodes is crucial. Here, we report the synthesis of a new hybrid material composed of molybdenum disulfide and molybdenum oxides heterostructured with strontium molybdate. For this, a facile one-pot hydrothermal process was developed directly onto the TiO₂ nanotube carpet substrate. The interfacing of strontium molybdate at the electrode substrate verified by X-ray photoelectron spectroscopy and Time of flight secondary ions mass spectrometry (ToF SIMS) techniques. Considerable higher catalytic activity at the surface of this hybrid film, with the onset potential of 190 mV vs RHE and a Tafel slope of 66 mV dec^?1 attaining ~80 mA cm^?2 at 0.35 V overvoltage was ascertained. Exciting HER stability in comparison with the pure synthetic MoS₂ was verified by a prolonged potential cycling from 0.05 to ?0.35 V versus RHE potential and 45 h continuous HER processing at a constant current density.     

FixMyStreet Brussels: Socio-Demographic Inequality in Crowdsourced Civic Participation

FixMyStreet (FMS) is a web-based civic participation platform that allows inhabitants to report environmental defects like potholes and damaged pavements to the government. In this paper, we examine the use of FMS in Brussels, the capital city of Belgium. Analyzing a total of 30,041 reports since its inception in 2013, we demonstrate how civic participation on FMS varies between the ethnically diverse districts in Brussels. We compare FMS use to a range of sociodemographic indicators derived from official city statistics as well as geotagged social media data from Twitter. Our statistical analysis revealed several significant differences between the districts that suggested that crowdsourced civic participation platforms tend to marginalize low-income and ethnically diverse communities. In this respect, our findings provide timely evidence to inform the design of more inclusive crowdsourced, civic participation platforms in the future.     

A Surface Tailoring Method of Ultrathin Polymer Gate Dielectrics for Organic Transistors: Improved Device Performance and the Thermal Stability Thereof

Tailoring the surface of the dielectric layer is of critical importance to form a good interface with the following channel layer for organic thin film transistors (OTFTs). Here, a simple surface treatment method is applied onto an ultrathin (<15 nm) organosilicon‐based dielectric layer via the initiated chemical vapor deposition (iCVD) to make it compatible with organic semiconductors without degrading its insulating property. A molecular‐thin oxide capping layer is formed on a 15 nm thick poly(1,3,5‐trimetyl‐1,3,5‐trivinyl cyclotrisiloxane) (pV3D3) by a brief oxygen plasma treatment. The capping layer greatly enhances the thermal stability of the dielectrics, without degrading the original mechanical flexibility and insulating performance of the dielectrics. Moreover, the surface silanol functionalities formed by the plasma treatment can also be utilized for the surface modification with silane compounds. The surface‐modified dielectrics are applied to fabricate low‐voltage operating (<5 V) pentacene‐based OTFTs. The highest field‐effect mobility of the device with the surface‐treated 15 nm thick pV3D3 is 0.59 cm² V^?1 s^?1, which is improved up to two times compared to the TFT with the pristine pV3D3. It is believed that the simple surface treatment method can widely extend the applicability of the highly robust, ultrathin, and flexible pV3D3 gate dielectrics to design the surface of the dielectrics to match well various kinds of organic semiconductors.     

Vertical dynamic interactions of poroelastic soils and embedded piles considering the effects of pile-soil radial deformations

The paper presents an analytical solution for the vertical dynamic interaction analysis of a poroelastic soil layer and an embedded pile with the consideration of pile-soil radial deformations. The soil is treated a three-dimensional porous continuum and described by the Boer’s poroelastic model, while the pile is treated as a two-dimensional rod with both radial and vertical deformations of which the equation of motion is derived by the Hamilton’s variational principle. Without the introduction of potential functions, first take the volumetric strain of soil skeleton and pore fluid pressure as intermediate variables to deal with the equations of motion for the soil and then use the separation of variables to solve the equations of motion for the soil and the pile. By imposing the boundary and continuity conditions of the pile-soil system, the dynamic impedance in frequency domain and the velocity response in time domain of the pile top are obtained. The present solution is then verified by comparing with the corresponding finite element model computation results and the existing solutions. The effects of the pile-soil parameters on the dynamic characteristic of the pile-soil system are also analyzed. Some significant conclusions are drawn, which can provide useful reference for related engineering practice.     

Application of nanotechnology in removal of NAPLs from contaminated aquifers: a source clean-up experimental study

Clean Technologies and Environmental Policy - This work investigates the removal of non-aqueous phase liquids (NAPLs) from groundwater resources using nanotechnology. We present results of a series...