排序方式: 共有83条查询结果,搜索用时 46 毫秒
2.
为了消除紫外光通信过程中强烈散射所引起的码间干扰,采用一种带信道估计的最小均方误差-最大似然估计(LMS-MLE)延迟判决均衡算法进行了理论分析和仿真验证。通过选取合适的判决延迟深度来调整LMS自适应滤波器抽头系数进行信道跟踪,获取新的信道估计向量,最后利用MLE均衡算法得到最优序列输出。结果表明, 该算法可以明显提升紫外光通信系统的性能,在没有提高复杂度的情况下,性能接近最优MLE均衡算法,并且可以实现信道跟踪, 紫外光通信中算法的最佳延迟量取值为20。这一结果对紫外光通信性能提升以及MLE均衡器的工程实现是有帮助的。 相似文献
4.
5.
6.
针对水面传感器随机部署时网络覆盖率较低的问题,采用了一种面向水环境的无线传感网虚拟距离覆盖算法,在保证连通性的前提下提高网络的覆盖率。在虚拟距离算法中,每个传感器节点的运动受到3个虚拟距离的影响:节点之间的虚拟距离、未被覆盖区域格点与节点的虚拟距离以及边界与节点间的虚拟距离。仿真结果表明:该算法可以有效地提高网络覆盖率。可以得出以下结论:虚拟距离算法通过对节点位置的控制更新有效提高了网络覆盖率,使节点得到优化部署。 相似文献
7.
Taifei ZHAO 《等离子体科学和技术》2022,24(11):114004
Plasma flow control technology has broad prospects for application. Compared with conventional dielectric barrier discharge plasma actuators (DBD-PA), the sliding discharge plasma actuator (SD-PA) has the advantages of a large discharge area and a deflectable induced jet. To achieve the basic performance requirements of light weight, low cost, and high reliability required for UAV (Unmanned Aerial Vehicle) plasma flight experiments, this work designed a microsecond pulse plasma supply that can be used for sliding discharge plasma actuators. In this study, the topology of the primary circuit of the microsecond pulse supply is determined, the waveform of the output terminal of the microsecond pulse plasma supply is detected using the Simulink simulation platform, and the design of the actuation voltage, the pulse frequency modulation function and the construction of the hardware circuit are achieved. Using electrical diagnosis and flow field analysis, the actuation characteristics and flow characteristics of sliding discharge plasma under microsecond pulse actuation are studied, the optimal electrical actuation parameters and flow field characteristics are described. 相似文献
8.
针对光散射粒子测量方法中测量结果受到外界杂散光干扰这一问题,提出将日盲紫外光应用于光散射粒子测量方法中。利用Mie散射理论仿真了日盲紫外光不同粒径粒子的散射光分布函数,结果表明,日盲紫外光对粒径较小的粒子散射特性良好,能够应用于光散射粒子测量方法之中。利用T矩阵方法计算了日盲紫外光椭球粒子的散射特性,结果表明,在日盲紫外光248 nm处,椭球粒子的消光截面相比等效球形粒子偏小2.82%,散射截面偏小1.95%。最后分析了椭球粒子形变参数与复折射率对其散射相函数的影响,这些分析为光散射粒子测量方法提供了一定的理论依据。 相似文献
9.
10.
圈构造算法是Mesh光网络中p圈法设计的前提。根据简单p圈的特点,针对圈构造算法问题,提出将原来圈上边变为跨接边的图扩展算法。该圈扩展算法构造的圈具有保护性能优良,并且包含所有原来的圈上的点。在圈扩展算法和Local-map概念的基础上提出了基于Local-map的p圈启发式算法,该算法在Local-map中运行固扩展算法,这样既能提高p圈的保护性能,又能使p圈位于局域范围内,保证快速恢复。对比分析Local-map和DFS两种找圈算法的实验结果,该方案构造的圈恢复速度快,容量利用率高,比较适合网状光网络中的p图设计。 相似文献