Statistical Piezotronic Effect in Nanocrystal Bulk by Anisotropic Geometry Control

Utilizing inner-crystal piezoelectric polarization charges to control carrier transport across a metal-semiconductor or semiconductor–semiconductor interface, piezotronic effect has great potential applications in smart micro/nano-electromechanical system (MEMS/NEMS), human-machine interfacing, and nanorobotics. However, current research on piezotronics has mainly focused on systems with only one or rather limited interfaces. Here, the statistical piezotronic effect is reported in ZnO bulk composited of nanoplatelets, of which the strain/stress-induced piezo-potential at the crystals’ interfaces can effectively gate the electrical transport of ZnO bulk. It is a statistical phenomenon of piezotronic modification of large numbers of interfaces, and the crystal orientation of inner ZnO nanoplatelets strongly influence the transport property of ZnO bulk. With optimum preferred orientation of ZnO nanoplatelets, the bulk exhibits an increased conductivity with decreasing stress at a high pressure range of 200–400 MPa, which has not been observed previously in bulk. A maximum sensitivity of 1.149 µS m⁻¹ MPa⁻¹ and a corresponding gauge factor of 467–589 have been achieved. As a statistical phenomenon of many piezotronic interfaces modulation, the proposed statistical piezotronic effect extends the connotation of piezotronics and promotes its practical applications in intelligent sensing.     

基于NR-Transformer的集群作业运行时间预测

高性能集群的作业调度通常使用作业调度系统来实现，准确填写作业运行时间能在很大程度上提升作业调度效率。现有的研究通常使用机器学习的预测方式，在预测精度和实用性上还存在一定的提升空间。为了进一步提高集群作业运行时间预测的准确率，考虑先对集群作业日志进行聚类，将作业类别信息添加到作业特征中，再使用基于注意力机制的NR-Transformer网络对作业日志数据建模和预测。在数据处理上，根据与预测目标的相关性、特征的完整性和数据的有效性，从历史日志数据集中筛选出7维特征，并按作业运行时间的长度将其划分为多个作业集，再对各作业集分别进行训练和预测。实验结果表明，相比于传统机器学习和BP神经网络，时序神经网络结构有更好的预测性能，其中NR-Transformer在各作业集上都有较好的性能。     

Flash cosintering of a lanthanum strontium cobalt ferrite nanofibre/Gd-doped ceria bilayer structure

For solid oxide fuel cells, an important structural requirement is that the electrolyte layer needs to be dense and the electrode layer porous, which is difficult to obtain by conventional cosintering. In this work, flash cosintering of a double layer structure consisting of a Gd-doped ceria substrate with a lanthanum strontium cobalt ferrite nanofibre coating is investigated. Experimental and finite element modelling results reveal that when the LSCF layer is connected to the electrode, the heat is concentrated in the LSCF layer, which leads to a huge temperature gradient and introduces severe cracking. When the LSCF layer is electrically isolated from the electrode, the heat is concentrated in the GDC layer, and the temperature gradient is dramatically reduced. In this situation, the density of GDC can reach 92.86% while a high porosity of 52.26% is maintained in the LSCF layer, which is higher than that of the conventional cosintered sample.     

Corrosive wear behavior of HVOF-sprayed micro-nano-structured Cr3C2–NiCr cermet coatings under aqueous media

A novel micro-nano-structured Cr₃C₂–NiCr cermet coating was prepared on 316L stainless steel by high-velocity oxygen fuel spraying technology (HVOF). Cermet coatings with different contents of micro-and nano-sized Cr₃C₂ particles as the hard phase and a NiCr alloy matrix as the bonding phase were prepared and characterized in terms of porosity, microhardness, and corrosive wear resistance in a 3.5% NaCl solution and artificial seawater. Compared to nanostructured coatings, micro-nano-structured coatings avoid decarburization and reduce nanoparticle agglomeration during the spray process, and mechanical and electrochemical properties were improved in comparison with those of conventional coatings. The micro-nano-structured Cr₃C₂–NiCr coating rendered low porosity (≤0.34%) and high microhardness (≥1105.0HV_0.3). The coating comprising 50% nano-sized Cr₃C₂ grains exhibited the best corrosive wear resistance owing to its densest microstructure and highest microhardness. Furthermore, compared to static corrosion, the dynamic corrosion of the coatings led to more severe mechanical wear, because corrosion destroyed the coating surface and ions promoted corrosion to invade coatings through the pores during corrosion wear.     

转锈稳锈材料在石油钻采设备薄壁件表面的应用

石油钻采设备中存在部分薄壁板件(厚度不超过3 mm),在喷砂或喷丸过程中极易造成变形,故实际生产中只能手工打磨清理。但是手工打磨效率较低,且一旦手工清理不彻底,会影响产品的防腐质量。为提升石油钻采设备中薄壁防腐质量,引进了新材料——转锈稳锈材料。通过控制变量,使用拉拔仪检测不同变量下涂层附着力;对转锈稳锈材料和传统的手工处理进行比较,考察其对不同品牌的油漆是否具有兼容性。研究结果表明:转锈稳锈材料与传统的手工打磨清理相比在增加漆膜附着力方面更具有优势,而且与大多数的油漆具有兼容性。     

A novel and sensitive colorimetric detection of PABA by asymmetrically functionalized TA-AuNPs-PEG-FITC based on oriented aggregation

A colorimetric assay based on the oriented TA-AuNPs-PEG-FITC for rapid and sensitive PABA detection was proposed. Initially, the negatively charged TA modified on the surface of AuNPs enabled rapid binding to PABA due to the electrostatic interaction and hydrogen bond, resulting in a visible color change. However, particles were aggregated in a non-oriented way, leading to an unstable testing system which failed to realize the accurate quantification. Thus, the asymmetrically functionalized TA-AuNPs-PEG-FITC were prepared, in which the stabilizer agent of HS-PEG-FITC was attached to the specific sites on the surface of TA-AuNPs. Such a way of modification resulted in an oriented aggregation manner, the addition of PABA induced the formation of oligomers. Moreover, the introduction of FITC group acted as fluorescent marker, providing a simple, fast and quantitative method for characterization of PEG chain. The molar ratio between TA-AuNPs and modified PEG-FITC was further determined. A linear regression was established in a wide range from 10 μM to 1 mM with the LOD of 6.9 μM. Finally, the sensor was successfully applied in the health food. This was the first example in which TA-AuNPs-PEG-FITC were fabricated for colorimetric detection of PABA, and an indirect method based on fluorescence marker was well used to quantify the content of PEG chain.     

Tunable microwave absorption properties of nickel-carbon nanofibers prepared by electrospinning

The nickel-carbon nanofibers (Ni-C NFs) were fabricated by the electrospinning of poly(vinyl alcohol) (PVA) and nickel acetate tetrahydrate (NiAc) solution precursor with succedent PVA pyrolyzation and calcination process. The microwave absorption performance and electromagnetic (EM) parameters of the NFs were researched over the frequency range of 2.0–18.0?GHz. Both the impedance matching and EM wave absorption properties of the Ni-C NFs were improved by changing the carbonization temperature. The effect of graphitization degree on reflection loss (RL) and the possible loss mechanisms were directly displayed in the comparative study of each sample. The optimal RL value of ??44.9?dB and an effective frequency bandwidth of 3.0?GHz under a thickness of 3.0?mm can be reached by a sample calcined at 650?°C. These lightweight Ni-C NFs composites can be promising candidates for EM wave absorbers due to the combination of multiple loss mechanisms, nano-size effect and good impedance matching between Ni nanoparticles and CNFs.     

Optimization of structural,electrical, and magnetic properties of ytterbium substituted W-type hexaferrite for multi-layer chip inductors

The rare earth (Yb³⁺) substituted W-type hexagonal ferrites with composition CaPb_2-xYb_xFe₁₆O₂₇ (x = 0.0, 0.5, 1.0, 1.5, 2.0) were synthesized by a facile and cost-effective sol-gel auto combustion method with post heat treatment. The synthesized hexagonal ferrites were characterized by a variety of analytical techniques, and an impedance analyzer was used to investigate the effects of Ytterbium on structural, magnetic, spectral and dielectric properties. The relationship between their impedance, structure and dielectric properties was investigated. The X-ray diffraction patterns verify the presence of single-phase W-type hexagonal ferrites. Physical properties such as D_bulk (bulk density), D_xrd (X-ray density), and P (porosity) of the CaPb_2-xYb_xFe₁₆O₂₇ W-type hexagonal ferrites were calculated. The bulk density of all the samples was decreased, and X-ray intensity was increased with the Ytterbium replacement in the W-type hexaferrite. By adding Yb³⁺ ions, the lattice parameters, cell volume and X-ray density were reduced due to the substitution of ytterbium with smaller ionic radii compared to the lead ion with large ionic radii. The AC-conductivity was increased from (1.523 × 10^?5 to 6.699 × 10^?5) Ωcm^?1. The dielectric constant and tangent loss was found to decrease substantially. The magnetic properties were found to enhance by the substitution of Yb³⁺. The low coercivity value of Yb³⁺ substituted W-type hexagonal ferrites are suitable for magnetic recording media operated at a high-frequency regime. The enhancement of electrical, dielectric and magnetic characteristics suggests these materials as promising for multi-layer chip inductors (MLCIs) circuit applications.     

Cryogenic system design for HIAF iLinac

A helium cryogenic system is designed by the Institute of Modern Physics,Chinese Academy of Sciences,to supply different cooling powers to the cryomodules of ion-Linac (iLinac) accelerator,which serves as the injector of the High Intensity Heavy-Ion Accelerator Facility project.The iLinac is a superconducting heavy-ion accelerator approximately 100 m long and contains 13cryomodules cooled by superfluid helium.This article describes the cryogenic system design of the iLinac accelerator.The requirements of the cryogenic system,such as cooling mode,refrigeration temperature,operating pressure and pressure stability,are introduced and described in detail.In addition,heat loads from different sources are analyzed and calculated quantitatively.An equivalent cooling capacity of 10 kW at 4.5 K was determined for the cryogenic system according to the total heat load.Furthermore,a system process design was conducted and analyzed in detail.Further,the system layout and the main equipment are presented.     

A critical review of diamond like carbon coating for wear resistance applications

In recent years innovation in carbon based materials have encouraged both researchers as well as industrialists to develop materials/composites with improved tribological properties. Researchers have been fascinated to develop diamond like carbon (DLC) or carbon nanotubes (CNTs) reinforced coatings to their good corrosion resistance, excellent wear resistance, good adhesion strength, and self -lubricious nature. The present review article is mainly focused on various techniques employed in order to process DLC/CNTs coatings as well as provide a summary of DLC/CNTs deposition on different substrates. The present study includes major types, properties and tribological behavior of carbon based materials and mechanisms involved in coating deposition. The study also discusses that deposition of DLC/CNTs coatings on the substrate materials enhances the wear, corrosion and mechanical properties of the substrate.