Performance analysis of bit error rate of data link system under pulse LFM interference in time-varying rayleigh channel

Wireless Networks - In such mobile platforms as ships and aircraft, the detection and reconnaissance devices are near to the communication facilities. When working at the same time, they will...     

Research on children's personalized sports in the environment of smart wearable devices

The audit point is to understand and use to perform the upgrade wearable innovation injuries in sports. Understanding the game's biomechanics is that damage response and performance upgrades are essential, and usually, investigation uses optical motion capture. In any case, this approach may be limited by the amount of limit catch climatic factors and the overwhelmed wearable research center of innovation. Ordered to make queries are used to study in seven information centers and sports car wearable innovation factors. This article was banned because they do not measure the program members on the sensor zero and the motor or motor factors or the application of an innovative set. Thirty-three incorporated into the collection of the full text of the survey carried out to identify members' dynamic development through observation and a slice of wearable progress in the game. Inertial sensors, the sensor and the flexible, attractive and precise speed field sensors are used in the game with more than 15 measured motion gadgets. The use of wearable innovation, the potential of these innovative practices, and the impact of competitors' training methods are still in the exploratory stage.     

Reconstructed Water Oxidation Electrocatalysts: The Impact of Surface Dynamics on Intrinsic Activities

Electroreduction of small molecules such as H₂O, CO₂, and N₂ for producing clean fuels or valuable chemicals provides a sustainable approach to meet the increasing global energy demands and to alleviate the concern on climate change resulting from fossil fuel consumption. On the path to implement this purpose, however, several scientific hurdles remain, one of which is the low energy efficiency due to the sluggish kinetics of the paired oxygen evolution reaction (OER). In response, it is highly desirable to synthesize high-performance and cost-effective OER electrocatalysts. Recent advances have witnessed surface reconstruction engineering as a salient tool to significantly improve the catalytic performance of OER electrocatalysts. In this review, recent progress on the reconstructed OER electrocatalysts and future opportunities are discussed. A brief introduction of the fundamentals of OER and the experimental approaches for generating and characterizing the reconstructed active sites in OER nanocatalysts are given first, followed by an expanded discussion of recent advances on the reconstructed OER electrocatalysts with improved activities, with a particular emphasis on understanding the correlation between surface dynamics and activities. Finally, a prospect for clean future energy communities harnessing surface reconstruction-promoted electrochemical water oxidation will be provided.     

Synchronized motion and compliant control for dual control moment gyroscopes by realizing the impedance transformation matrix

In this paper, dual control moment gyroscopic actuators (CMG) were formed in a scissored-pair configuration to maximize the induced torque in the desired direction. A robust synchronizing motion control method was proposed to regulate the directional gyroscopic torque. In order for the two CMGs to form a scissored-pair structure having opposite angular momentum vectors, the synchronization of two CMGs was done without losing the control capability due to axial drift. A transformation matrix was designed for the robust synchronization control performance by realizing the empirically discovered impedance models of CMGs. Three different control modes were realized by selecting the components of the impedance transformation matrix (ITM): a robustly independent control mode, a synchronized motion control mode, and a mixed motion control mode. Each CMG played the role of either a master or a slave and copied the motion from another to follow it under the synchronization mode. The experimental results show that two CMGs can generate a robust and directional torque under the mixed control mode of both robust and synchronization control.     

下扬子地区下志留统风暴沉积特征及风暴作用对泥页岩品质的影响

近年来在下扬子地区页岩气地质调查井所获取的地层岩心资料，揭示该地区下志留统风暴沉积较为发育。基于精细的岩心观察描述，详细分析了下扬子地区下志留统高家边组下段中上部风暴沉积的特征，并阐明了风暴作用对泥页岩的影响。研究表明：研究区风暴岩岩性偏细，以粉砂岩为主，石英含量较高，结构成熟度较低，具2种不同的粒度概率曲线；主要发育底部冲刷面、块状层理、平行层理、丘状交错层理、波纹交错层理、准同生变形构造等沉积构造；垂向上主要识别出4种风暴沉积序列，均具有从底到顶粒度变细的沉积特征，不同的沉积序列与风暴流能量的强弱有关。下扬子地区早志留世频繁的风暴活动与研究区的古地理背景和古气候条件具有内在联系。特大型风暴对浅海陆棚深水区的细粒泥质沉积物特征产生重要影响，包括降低有机质含量、减少单层厚度、破坏垂向连续性、改变原始沉积构造和侧向稳定性等，总体上降低了泥页岩的品质。因此，研究认为在页岩气的勘探和评价过程中应重视风暴因素对陆棚深水区原始泥质沉积物的影响。     

Soluble polyimide as liquid crystal perpendicular alignment layer

Journal of Materials Science - Three polyimides (PIs) were prepared from a diamine containing biphenyl ester group as a side chain and a corresponding dianhydride chosen from...     

某铁矿强磁尾矿反浮选回收试验研究

针对我国西部某铁矿强磁选尾矿进行了反浮选回收铁资源的试验研究, 探讨了pH值、抑制剂可溶性淀粉用量、阳离子捕收剂十二胺用量对浮选指标的影响。结果表明, 在矿浆pH=10、可溶性淀粉用量2 400 g/t、十二胺用量400 g/t条件下进行一粗一精(精选药剂用量减半)闭路反浮选, 可获得铁品位43.88%、回收率50.93%的铁精矿产品。     

Stability,reactivity and decomposition kinetics of surface passivated α-AlH3 crystals

As a novel high energy fuel, aluminum hydride (AlH₃) has great potential in the field of solid propellants because of its high hydrogen capacity, which can significantly improve the specific impulse of solid propellants. In order to improve the stability of α-AlH₃, hydrochloric acid has been used to stabilize AlH₃ and the stabilization mechanism has been investigated. Various characterization techniques including scanning electron microscopy, X-ray electron spectrometer, X-ray diffraction, thermal analysis, and vacuum stability test have been employed to investigate the morphology, crystal structure, thermal stability, and decomposition kinetics of raw and passivated α-AlH₃. The results showed that the honeycomb-like structures could be formed on the surface of α-AlH₃ after passivation. First of all, the initial decomposition temperatures of the passivated samples were slightly increased. In particular, for the optimized sample with 105 min passivation time (AlH₃-105min), the initial decomposition temperature (173.4 °C) is increased by 5.6 °C. Moreover, the total decomposition time (1652 min) is improved by about 50% than that of the raw sample (1098 min). Besides, the decomposition activation energies (E_a) of passivated samples are much higher than that of the raw sample (84.8 kJ mol^?1), in which the optimized sample (AlH₃-105min) reaches 107.1 kJ. mol^?1. The decomposition kinetics model may change from 3-D nucleation and nucleus growth model to 2-D nucleation and nucleus growth model. It demonstrates the passivated samples have a lower decomposition rate and higher thermal stability. The stabilization mechanism is as follows: removing the impurities on the surface and accelerating the hydrolysis reaction of AlH₃ to generate complete and dense oxide layers.