大朝山水电站地下洞室安全监测资料分析

大朝山水电站引水发电系统为地下工程，根据各项安全监测物理量的主要观测成果，对最大观测值分析其对工程的安全影响，为保证其安全运行具有重要意义。为此，分别对大朝山水电站的主要地下建筑物，包括压力引水隧洞、地下厂房、尾水调压室的最大观测值进行了分析研究，并提出了一些建议，有较大的参考价值。     

以创新实现云南文山斗南锰资源的有效利用

随着国民经济特别是钢铁工业的迅速发展，资源危机成为困扰资源型可持续发展的核心问题，只有坚持以创新为动力，才能实现锰矿等资源的有效利用。     

浅议铵梯炸药质量检验中的三个问题

文章探讨了GB 12437-2000标准规定的产品检验项目中,中包浸水试验的科学性问题和对批产品进行抽样时的样本代表性问题以及使用多段爆速仪测试爆速时应注意的样本量问题.     

柴石滩电站计算机监控系统配置及主要功能

柴石滩水库坝后电站装机容量３×２０ＭＷ，水库库容４．３７亿，坝高１０３．２ｍ，电站采用计算机监控为主简易常规监控为辅的方式。本文介绍了电站计算机监控系统网络结构及系统软硬件配置以及监控系统功能、特点，简易常规监控方式。电站监控系统采用招标方式已定了生产厂家和系统方案。     

Year round test of a solar adsorption ice maker in Kunming,China

A solar adsorption ice maker with activated carbon–methanol adsorption pair was developed for a practical application. Its main features include utilization of a water cooled condenser and removing all valves in the refrigerant circuit except the one that is necessary for refrigerant charging. Year round performance tests of the solar ice maker were performed in Kunming, Yunnan Province, China. Test results show that the COP (coefficient of performance) of the solar ice maker is about 0.083–0.127, and its daily ice production varies within the range of 3.2–6.5 kg/m² under the climatic conditions of daily solar radiation on the surface of the adsorbent bed being about 15–23 MJ/m² and the daily average ambient temperature being within 7.7–21.1 °C. The suitable daily solar radiation under which the solar ice maker can run effectively in Kunming is above 16 MJ/m².     

高含酸性气碳酸盐岩气藏流体敏感性实验研究

对川东北雷口坡组、嘉陵江组、飞仙关组、长兴组高含H，S及032的碳酸盐岩储层流体敏感性进行了实验研究，结果表明岩样速敏损害弱～强，水敏和盐敏损害中偏弱～极强，碱敏损害严重。岩石学分析揭示，川东北高含酸性气碳酸盐岩储层发育伊利石、微晶石英、白云石、方解石、硫化钙等潜在损害物质。钻井完井液侵入会破坏储层各物质间的原始动态平衡，诱发储层损害。主要损害机理为：①储层流体pH增加引起黏土矿物以及微晶石英失稳；②碱液与微晶石英、长石、白云石反应生成硅酸盐、高岭石、水镁石等新矿相；③流体矿化度改变可降低伊利石微粒间的连接力；④硫化钙水解产生OH^-，过量的OH-与Ca^2＋结合形成氢氧化钙沉淀；⑤储层含水饱和度和流体离子浓度改变，致使焦沥青脱附并在储层深部沉积；⑥硬石膏水化膨胀、分散运移。针对该气藏损害机理，可采用屏蔽暂堵技术以形成优质滤饼，有效降低储层流体敏感性损害。图5表2参10。     

云南锰矿选矿现状与前景分析

云南锰矿资源丰富,具有品位高、低磷低铁、易选等特点。文章概述了斗南、鹤庆、建水等锰矿的选矿科研进展情况,三个锰矿均可采用强磁选或磁-重选流程选别,可提高品位8—12％;精矿含锰可达33—35％,锰回收率在80％以上的好结果。     

水电站施工辅助企业的建设与管理

介绍了某大型水电站施工辅助企业的建设和管理实例，探讨对该类项目的建设与管理经验。     

Papermaking characteristics of three Populus clones grown in the north-central United States

The papermaking properties of 22 pure and hybrid poplars are being evaluated in an on-going investigation. Twenty of the poplars were harvested after 7.5 years from three different sites in the Midwestern and North Central US. The other 2 poplars survived at only two of three sites (64 total samples). The Crandon hybrid had the highest growth rate (t ha⁻¹ y⁻¹) and wood density (both averaged across the 3 sites). This poplar had a high cellulose content (compared to the average), a low lignin content and produced bleached kraft fibers at a high yield (wt.% on wood chips). Further, this poplar responded very well to kraft pulping and oxygen delignification and bleached to the highest final brightness ever observed in our laboratory (94.5% Elrepho). It also produced an 18 kappa number unbleached pulp with <0.5% rejects in only two-thirds the time required for sugar maple (Acer saccharum).We also report on clone 220-5 that had the highest area-weighted average microfibril angle. Pulps from this poplar had excellent tensile properties and further improvements are expected with 1–2 years of additional growth that should result in a small, but significant increase in average fiber length. Some results are also presented for clone 313.55 and aspen (Populus tremuloides) to demonstrate the many substantial benefits that can be accrued from proper wood selection.