Societal acceptance of hydrogen for domestic and export applications in Australia

With the urgent need to decarbonise the world's energy system, clean hydrogen is emerging as a potential technological solution. As with any new technology, understanding the public's response to hydrogen is critical to its success. Most studies examining public attitudes towards hydrogen have focused on refuelling stations and transport options. As a first of its kind, using a national survey (N = 2785) we evaluate the Australian public's response towards hydrogen for domestic and export use. In Australia, acceptance of hydrogen in domestic applications was influenced by its relative cost, ability to reduce air pollution and associated health benefits. Further, support for a hydrogen export industry was influenced by levels of trust in the government to manage the associated risks and the industry's commitment to climate protection. The paper concludes that effective, nuanced communication and engagement along with supporting financial policies will be critical in facilitating societal acceptance of hydrogen in Australia.     

Compatible performance of low thermal conductivity and high infrared radiation of Sm2O3-HfO2 series ceramics applied for thermal protection coatings

Sm₂O₃-HfO₂ series ceramics were synthesized at high temperature using the solid-state reaction. The phase stability, thermo-physical and infrared emission properties of Sm₂Hf₂O₇ (SHO) and Sm₂Hf₂O₇-44.83 wt%HfO₂ (25S/H) composite ceramics were comparatively investigated. Furthermore, their calcium magnesium aluminosilicate (CMAS) corrosion was conducted at 1250°C for different times. The results reveal that both SHO and 25S/H ceramics have excellent phase stability at 1600°C as well as excellent sintering resistance. SHO still exhibits slightly lower thermal conductivity and lower hardness and Young's modulus, higher thermal expansion coefficient (CTE) and fracture toughness as well as higher infrared emittance (0.899 at 800°C) than 25S/H composite with the excessive HfO₂ inside. Both SHO and 25S/H ceramics react with CMAS to form a relatively compact reaction layer, which can effectively prevent the penetration of CMAS. These results preliminarily indicate that SHO ceramic can be proposed as an alternative material of the traditional YSZ for high-temperature thermal protective applications thanks to its compatible performance of low thermal conductivity and high infrared radiation, etc.     

Determinants of the intention to use non-medical insertable digital devices: The case of Chile and Colombia

In the past, thinking of carrying electronic devices inside our bodies was only posed by non-real scenarios. The emergence of insertable devices has changed this. Since this technology is still in its initial development stages, few studies have investigated factors that influence its acceptance. This paper analyzes the predictors of the intention to use non-medical insertable devices in two Latin American contexts. We used partial least squares structural equation modeling to examine whether six constructs predicted intention to use insertable devices. A questionnaire was administered to undergraduate students located in Colombia and Chile (n = 672). We also examined whether these predictors influenced intention differently for both of them. Four common constructs significantly and positively influenced both Chilean and Colombian respondents to use insertable devices (hedonic motivation, habit, performance expectancy, and social influence). Also, the habit has a complementary mediating effect on the relationship between social influence and behavioral intention. By contrast, effort expectations were a positive and significant predictor, but only among Chilean respondents. Findings suggest that when technologies are emerging, well-known predictors of intention (e.g., performance and effort expectations) are less influential than predictors related to self-efficacy (e.g., habit and hedonic motivation). The use of insertable devices has a significant impact on society. Thus, a better understanding of what motivates their use has implications for both academia and industry.     

Compositional design,structure stability,and microwave dielectric properties in Ca3MgBGe3O12 (B = Zr,Sn) garnet ceramics with tetravalent cations on B-site

Two garnet-structured Ca₃MgBGe₃O₁₂ (B = Zr, Sn) ceramics with tetravalent cations at B-site were prepared by conventional solid state reaction. The crystal structure, microstructure evolution, and microwave dielectric performance were investigated using X-ray powder diffraction, Rietveld refinement, scanning electron microscopy, Raman spectroscopy, and infrared spectroscopy techniques. Dense Ca₃MgZrGe₃O₁₂ and Ca₃MgSnGe₃O₁₂ ceramics were obtained at sintering temperatures of 1420 and 1400 °C, respectively. The dielectric constant, unloaded quality factor, and temperature coefficient of resonance frequency of Ca₃MgZrGe₃O₁₂ were 10.80 ± 0.2; 79,600 ± 1000 GHz (f = 12.61 GHz); and ?66.8 ± 1 ppm/°C, respectively, and the corresponding values for Ca₃MgSnGe₃O₁₂ were 9.68 ± 0.2; 83,400 ± 1000 GHz (f = 14.19 GHz); and ?57.9 ± 1 ppm/°C, respectively. The dielectric performances of the two ceramics were compared by analyzing the ionic polarizability, packing fraction, and bond valence. The intrinsic dielectric properties were predicted by fitting the infrared reflectivity spectra.     

Evolution of core–rim structures and phase transformations in infra-red transmitting Y-α-SiAlON ceramics

Core–rim structures were observed as common features in Y-α-SiAlON ceramics hot-pressed between 1550?1950 °C. We found most dopants were taken into α’-rims, and a transition layer grown first on α-cores from liquid-phase over-saturated with metal solutes. Elongated β’-grain were formed as minor phase with α’- or AlN-cores thus only after the α’ matrix had consumed up all Y solutes, revealing that the α’ → β’ transformation is controlled by the transient liquid-phase and similar defects and dangling bonds could be detected in both SiAlON phases by cathodoluminescence. Quantitative assessment of Y_m/3Si_12?(m+n)Al_m+nO_nN_16?n demonstrates the multiphase evolution, initiated by over-saturation of Y solutes at low temperatures thus retaining α-phase as cores to lower the infra-red transmittance, dictated by homogenization of Al solutes at higher temperature. The elimination of those phase boundaries leads to better dopant and sintering design for achieving transparent and high-performance SiAlON ceramics.     

精细注水配套工艺技术优化研究

本文通过对注水配套工艺的优化研究,有效提高奈曼油田分注率和配注合格率,提高精细注水开发效果。     

军用涤纶长丝面料热转移印花及功能整理研究

介绍涤纶长丝面料分散染料热转移印花工艺,包括工艺流程、主要技术创新、产品应用等方面。阐述涤纶长丝面料阻燃涂层整理技术,并讨论阻燃剂用量、涂层增重量对整理效果的影响。总结防热红外侦察整理、防雷达波侦察整理、多功能迷彩面料生产及要点。文章表明,化纤长丝纺织产品的发展与国防建设是密切相关、相互促进、相辅相成的。以化纤长丝为基材生产的系列化军用产品是建设强大国防的重要保障。不断深化化纤长丝面料的功能性深度加工具有非常重要的意义。     

高精度薄壁钢套类零件制造工艺

薄壁钢套类零件是机械制造中常碰到的一类难加工零件,由于其不同的功能用途和典型结构特点,其制造有一定难度,在实际生产过程中,经常出现加工制造后的零件尺寸精度、形状精度、形位精度达不到使用及设计要求。本文较系统地阐述了薄壁钢套类零件的典型制造工艺方法以及在制造过程中的变形分析和应对措施。     

探篹雅故·格物致知——北京服装学院中国古代服饰研究范式述要

中国古代服饰文明悠久深厚,真实记录了中华民族的社会发展历程,其中包括服饰典章制度、社会习俗、技术工艺、文化审美等诸多领域的丰富资料和成就。它是一座文明的宝库,是向世界展现中华民族生生不息文化传统的一个窗口。近年来,北京服装学院不断探索中国古代服饰研究的新范式,尝试从多学科、多领域、多视角展开研究,本文即是对这项工作的述要。     

柔性夹具技术研究

为适应快速多变的市场需求,制造企业需要设计并应用柔性夹具。介绍了柔性夹具的发展及特点,给出了柔性夹具的设计依据,并从零件结构及工艺、组成元件确定、强度与精度保证等方面分析了柔性夹具的设计方法。