The Influence of Surfactant on the Surface Characterization of Celestite in Spherical Oil Agglomeration

This study investigates the relationship between the critical surface tension of wetting of celestite and agglomeration recovery as well as the zeta potential in dependence of pH and amount of collector (Na‐Oleate). For this purpose, effects of pH and collector amount on the agglomeration recovery are investigated and zeta potential measurements and Fourier Transform Infrared Spectrophotometer (FTIR) analyses are carried out to determine the adsorption type of Na‐Oleate on celestite surface. The sessile drop technique is used for the measurement of contact angle and determination of the critical surface tension of wetting (Y_C) of celestite. The maximum agglomeration recovery is obtained at pH 7. The critical surface tension of wetting of celestite is very close to the surface tension of kerosene, which is 25.95 mN/m. Furthermore, at the optimum Na‐Oleate amount of 10 kg/ton, the critical surface tension of wetting of celestite is approximately equal to the surface tension of kerosene.     

Final Drying of Whole Milk Powder in Vibrated-Fluidized Beds

Vibro-fluidized beds are widely used in drying sticky powders and agglomerated materials as milk powder. Using a vibro-fluidized laboratory scale dryer, this work is aiming at analyzing preliminarily the effect of its operational variables on the drying kinetics and characteristics of whole milk powder. The full-factorial design technique with three replications at the central point has been employed to generate data and correlations to quantify the effect of inlet air temperature, air flow rate, and vibration bed amplitude on the drying curves and the milk powder properties related to its faster reconstitution in water (as tapped density, Hausner cohesion ratio, agglomerate size distribution, and internal pore concentration). Results obtained are analyzed and discussed to identify the adequate operation condition for final drying whole milk powder in vibro-fluidized beds, assuring a high product quality.     

Modified oil agglomeration process for coal beneficiation. III. Grinding and agglomeration using different szego mill designs

The simultaneous grinding/agglormeration process has been used to beneficiate Minto coal. Experiments with the Szego Mill, a planetary ring-roller mill with grooved rollers, have given good results. Different roller ridge/groove sizes have been tested and favourable oil-coal-water ratios established. Ash removal is closely related to grinding performance. Very short mill residence times, of the order of 10 seconds, are sufficient for microagglomerate formation. Considerable equipment and operating cost savings are possible with the modified process.     

THE STICKY ISSUES OF DRYING

Unconrolled agglomeration of particles and adhesion of the particulate mass to wall surfaces are common severe problems in many drying operations. This paper reviews the mechanisms of interparticle and particle-surface attraction as well as the theory and the existing tests for characterising powders in terms of internal strength, wall friction and adhesion. The usefulness of the information obtained from these tests in dryer design and operation is critically reviewed. The importance of powder stickiness in various types of dryers is discussed and established methods of combating the problem are presented Recommendations an made for further research in the area of powder cohesion and adhesion.     

Influences of dehydrating process on properties of ATO nano-powders

1　INTRODUCTIONCrystallineSbdopedtinoxide (ATO) ,cassiteritestructure ,isawidebandgapn typesemiconductor.Be causeofitsopticalproperty (transparentforvisiblelightandreflectiveforIR )andelectroconductibility ,goodchemicalandmechanicalstability ,ithasmanyapplica tions,suchastransparentconductiveelectrodes ,photo voltaicdevices ,photosensors ,catalyst,antistaticcoatingsandelectrochromicmaterials[14 ] .AvarietyoftechniqueshavebeenusedtoprepareATOsuperfinepowders ,someinvolvedryprocesses ,ot…     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

Investigation of kinetics of agglomerate growth in oil agglomeration process

In this study, the kinetics of agglomerate growth in a batch oil agglomeration process has been studied using bituminous coal. The effect of operating variables such as kerosene concentration, pulp density and speed of agitation on the agglomeration process was investigated. It has been found that the second-order kinetic equation describes the growth of agglomerates adequately. The growth of the agglomerates in the oil agglomeration process shows a self-preserving growth. Using this, a characteristic curve has been developed. For the prediction of the size distribution of the agglomerates, the d₅₀ values of the agglomerates must be known. Therefore, a model has been developed by using the kinetic equation for estimation of d₅₀ values of agglomerates for this coal. It was shown that the size distribution of the agglomerates for any levels of the process variables studied can be predicted using the equation of characteristic curve and d₅₀ values. Knowledge obtained from this study will be helpful for technological advancement of this kind of study.     

Sintering of Ceria-Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air

Amorphous CeO₂–ZrO₂ gels were prepared by coprecipitation in ammonia solutions. The onset of crystallization of the gels, from calcining in air, was 420°C, while 200° to 250°C in the presence of water and organic solvents such as methanol and ethanol. The sintering behaviors of CeO₂–ZrO₂ powders were sensitive to the crystallizing conditions, since hard agglomerates formed when the precipitated gels were crystallized by normal calcination in air, whereas soft agglomerates formed when they were crystallized in water or organic solvents. CeO₂–ZrO₂ powders crystallized in methanol and water at 250°C were sintered to full theoretical density at 1150° and 1400°C, respectively, whereas that crystallized by calcination in air at 450°C was sintered to only 95.2% of theoretical density, even at 1500°C.     

两步法合成大粒径丁苯胶乳

研究了聚甲基丙烯酸甲酯（MMA）对丁苯（BS）胶乳的附聚作用以增大丁苯胶乳粒径；探讨了无机盐、体系pH值及体系中MMA胶乳与BS胶乳的固含量比（R值）对附聚后丁苯胶乳的粒径及稳定性的影响。结果表明：适当添加无机盐可以稳定胶乳体系，最佳用量（质量分数）为0．1％～0．2％；适当增大体系pH值，可增大胶乳粒径；在附聚过程中，当R值在两个附聚峰附近时，可增大丁苯胶乳的粒径。     

Application of the Box-Wilson experimental design method for the spherical oil agglomeration of coal

In this study, the Box-Wilson statistical experimental design method was employed to evaluate the effects of important variables such as bridging liquid (oil) concentration, salt (CaCl₂·2H₂O) concentration and stirring speed on the agglomeration of bituminous coal. Response function coefficients were determined by the regression analysis of experimental data and the predictions were found to be in good agreement with the experimental results. The optimum kerosene concentration, CaCl₂·2H₂O concentration and stirring speed were determined as 30 wt%, 1 M and 1683 rpm, respectively, when considering combustible recovery and ash content.In addition, contact angle and solution surface tension measurements were carried out to evaluate of agglomeration success with the contact angle values and surface tension values. The surface tension of CaCl₂ 2H₂O solutions and the average contact angle increased with increasing CaCl₂·2H₂O concentration.