The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

Air Filtration and Radon Decay Product Mitigation

Air cleaning as a means of mitigating the risks arising from exposure to indoor radon progeny has been evaluated in a single-family house in the north eastem US. using an automated, semi-continuous activity-weighted size distribution measurement system. The measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made in the house with and without an operating air filtration system and with various particle sources common to normal indoor activities operating. Aerosols were generated by running water in a shower, candle burning, cigarette smoking, vacuuming, opening doors, and cooking. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the unattached fraction with and without the air cleaning system were calculated. In the presence of active aerosol sources, the air filtration unit typically reduced the concentration of particles within the hour following the end of particle generation. After candle burning, cigarette smoking, and vacuuming in the bedroom, the reductions of PAEC by air filtration are about 60% with the air filtration system operating in the bedroom. During cooking in the kitchen, the reductions of PAEC in the bedroom with the air filtration system were about 40%. However, for all cases the dose reductions were smaller than the particle and PAEC reductions. For those particles that were generated within the bedroom, there was a 20% to 50% reduction in dose. In the case of cooking where the door was open and particles infiltrated from the rest of the house, the dose reduction was only 5% on average and appears to be insignificant. Thus, the dose reductions were h e r than the reductions in activity concentration, but there were no cases where the estimated dose actually increased.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

浅谈电子产品对儿童的影响及对策

在现代社会中,平板电脑、智能手机在人们日常生活的方方面面发挥着巨大的作用。通过分析电子产品在儿童和青少年的视力、身体发育、社交能力和学习能力等方面的负面影响,提出了加强亲子陪伴、合理引导控制等应对措施。     

电镀塑料制品对结构设计及成形工艺的要求

为保证电镀塑料制品的质量,提出了符合电镀要求的塑料制品设计原则,并且指出在注塑成形时,对塑料经过充分干燥,采用较高的注塑温度,较低的注射压力和较慢的注射速度,是使镀层获得良好结合强度的先决条件。     

简论产品定价法

随着社会主义的不断完善，在企业的经营决策中，产品的价格确定是一个十分重要的内容．售价决策正确与否，直接关系到企业经济效益的好坏．本文对产品定价的方法作一探讨，试图找到一种对企业来说比较实用的方法．     

涟钢CSP产品现状及未来板带材开发展望

介绍了涟钢CSP产品的现状及其性能。为调整产品结构，提高企业的市场竞争能力，提出了未来开发CSP板带材产品的几点建议。     

Development of Measurement Facilities for Analyzing Petroleum Products

The question of developing measurement provisions for the parameters of petroleum products is considered. The main technical features of a KLAN-1 mobile laboratory unit for analyzing petroleum products intended for rapid analysis of fuel and lubricating materials in storage and on sale are provided.     

Tuning in to psychological change: Linguistic markers of psychological traits and emotions over time in popular U.S. song lyrics.

American culture is filled with cultural products. Yet few studies have investigated how changes in cultural products correspond to changes in psychological traits and emotions. The current research fills this gap by testing the hypothesis that one cultural product—word use in popular song lyrics—changes over time in harmony with cultural changes in individualistic traits. Linguistic analyses of the most popular songs from 1980–2007 demonstrated changes in word use that mirror psychological change. Over time, use of words related to self-focus and antisocial behavior increased, whereas words related to other-focus, social interactions, and positive emotion decreased. These findings offer novel evidence regarding the need to investigate how changes in the tangible artifacts of the sociocultural environment can provide a window into understanding cultural changes in psychological processes. (PsycINFO Database Record (c) 2011 APA, all rights reserved)