Effect of phosphogypsum on saline-alkalinity and aggregate stability of bauxite residue

A column experiment was conducted to investigate the effect of phosphogypsum (PG) on the saline- alkalinity, and aggregate stability of bauxite residue. Results showed that: with increasing leaching time, the concentrations of saline-alkali ions decreased while the concentration increased in bauxite residue leachate; compared with CK (control group) treatment, pH, electric conductivity (EC), exchangeable sodium percentage (ESP), sodium absorption ratio (SAR), and exchangeable Na⁺ content of bauxite residue were reduced following PG treatment; average particle sizes in aggregates following CK and PG treatments were determined to be 155 and 193 nm, respectively. SR-μCT test results also confirmed that bauxite residue following PG treatment acquired larger aggregates and larger pore diameter. These results indicate that the PG treatment could significantly modulate the saline-alkalinity, and simultaneously enhance aggregate stability of bauxite residue, which provides a facile approach to reclaim bauxite residue disposal areas.     

KCl/NaCl/CPI复合盐阳离子聚合物钻井液在南海大斜度井段中的应用

为改善南海东部惠州25-8油田大斜度井因泥岩水化造浆而引起的井壁失稳和钻井液增稠影响携砂的问题,在现有成熟PLUS/KCl钻井液的基础上开展复合盐阳离子聚合物钻井液研究,对钻井液配方进行了优化,评价了优化后钻井液的流变性、抑制性、封堵性和润滑性,并在惠州油田进行了现场应用。结果表明,复合盐阳离子聚合物钻井液配方中,无机盐类抑制剂KCl和NaCl的适宜加量为3%和12%、有机阳离子聚合物抑制剂PF-CPI适宜的加量为2.0%。该钻井液抑制性强,防膨率高达93.32%,钻屑回收率87.56%;受到钻屑侵污后的钻井液流变性能波动小,仍具有较低的黏度和合适的切力,有利于大斜度井携砂;封堵性和润滑性均优于PLUS/KCl钻井液体系。现场应用2口井,钻井液流变性良好,平均起下钻速度提高,钻井过程顺利,无复杂情况发生。复合盐阳离子聚合物钻井液可改善南海大斜度井起下钻阻卡的问题。     

A comparative study on the effect of carbon-based and ceramic additives on the properties of fiber reinforced polymer matrix composites for high temperature applications

Ablative composites have been in use for thermal protection of space vehicles for decades. Carbon-phenolic composites have proven to perform exceptionally well in these applications. However with development in aerospace industry their performance needs improvement. In this field, different carbon-based and ceramic additives have been introduced into ablative composite systems. This review article gives a comparative analysis of researches done in this field in the recent past. Density, ablative, thermal and mechanical properties of ablative composites with different ultra-high temperature ceramic particles i.e. ZrSi₂, Cenosphere, nano-SiO₂, BN etc. and carbon-based nanoparticles i.e. CNTs, nano-Diamonds, Graphene oxide etc. used as additives, have been compared and discussed. Emphasis is put on carbon-phenolic composite systems although some epoxy matrix systems have also been discussed for comparison.     

Migration and distribution of saline ions in bauxite residue during water leaching

Bauxite residue, a highly saline solid waste produced from digestion of bauxite for alumina production, is hazardous to the environment and restricts vegetation establishment in bauxite residue disposal areas. A novel water leaching process proposed here was used to investigate the dynamic migration and vertical distribution of saline ions in bauxite residue. The results show that water leaching significantly reduced the salinity of bauxite residue, leaching both saline cations Na⁺, K⁺, Ca²⁺ and anions CO^2?₃, SO^2?₄, HCO^?₃. Na⁺ and K⁺ migrated from 40–50 to 20–30 cm of the column, presenting a high migration capacity. The migration capacity of Ca²⁺ was lower and accumulated at 30–40 cm of the column. CO^2?₃ initially distributed at 20–30 cm of the column, subsequently transported to 30–40 cm of the column, and finally returned to 20–30 cm of the column along with evaporation. SO^2?₄ was originally distributed at 40–50 cm, but finally migrated to 20–30 cm of the column. Nevertheless, HCO^?₃ remained at the bottom of the column, and its migratory was less affected by evaporation.     

气相色谱-三重四极杆质谱法快速测定糙米中氟虫腈及其代谢物残留

目的建立气相色谱-三重四极杆质谱(gas chromatography-triple quadrupole mass spectrometry,GC-MS/MS)测定糙米中氟虫腈及其代谢产物氟甲腈、氟虫腈砜、氟虫腈硫醚残留的的分析方法。方法糙米加水涡旋混匀后乙腈提取,通过N-丙基乙二胺(primary secondary amine,PSA)、C_(18)粉末、石墨化炭黑(graphitized carbon black,GCB)粉末净化提取液,气相色谱-三重四极杆质谱多重反应离子监测模式(multiple reaction monitoring,MRM)检测,以外标法定量。结果在1～50μg/L范围下,氟虫腈及其代谢物具有良好的线性关系,相关系数(r)均大于0.99,在2、10、20μg/kg 3个添加水平下,氟虫腈及其代谢物的平均回收率为91.6%～109.9%,相对标准偏差(relative standard deviation,RSD)为4.3%～6.3%。氟虫腈及其代谢物在糙米中的定量限为0.2～0.5μg/kg,定量限添加回收率在85.0%～108.0%,RSD为5.9%～6.9%。结论该方法操作简单快速、试剂耗材消耗少、灵敏度高,适用于快速处理大批量糙米中氟虫腈及其代谢产物的残留量检测。     

超高效液相色谱-串联质谱法测定动物源食品中克霉唑的残留量

目的建立QuEChERS提取和净化、超高效液相色谱-串联质谱(ultraperformanceliquid chromatography-tandem mass spectrometry, UPLC-MS/MS)测定猪肉、牛肉、羊肉、鸡肉等畜禽肉和猪肝、猪肾、羊肝、鸡心等畜禽内脏中克霉唑残留的分析方法。方法样品经正己烷饱和的乙腈提取,提取液经乙腈饱和的正己烷液液分配除脂,并经含PSA和C18粉末的净化管进一步净化。采用0.1%甲酸和乙腈作为流动相进行梯度洗脱,多反应监测模式(multiplereactionmonitoring,MRM)测定,同位素内标法定量。结果本方法在7 min内完成分离分析,方法在0.2～20.0μg/L范围内线性关系良好,相关系数r为0.9999。在0.2、2.0和20μg/kg添加水平下的回收率为78.5%～111.9%,相对标准偏差小于11.1%,方法定量限为0.2μg/kg。结论该方法快速、准确、灵敏,适合动物源食品中克霉唑残留量的测定。     

艾叶天然色素应用于苎麻纤维染色的研究

通过设计正交实验,得到优化的微波法提取艾叶色素的工艺为:料液比1∶15、微波功率560 W、处理时间2 min;对苎麻纤维进行阳离子改性,得到优化的改性工艺为:改性时间50 min、改性温度50℃、改性剂用量15 g/L、烧碱用量10 g/L;用艾叶色素上染阳离子改性的苎麻纤维,设计4因素3水平正交实验,采用一浴二步后媒染法进行染色实验,得到优化的染色工艺为:染色温度60℃、染色时间30 min、染液pH=5、艾叶色素提取液用量70 mL。     

湿法炼锌酸浸渣常规干燥实验研究

本文以湿法炼锌酸性浸出渣为研究对象,实验研究干燥温度、物料量、干燥时间对酸浸渣相对脱水率的影响,综合考虑干燥工艺的时效性、经济效益以及工艺效率,控制物料量为50g、干燥温度为90℃、干燥时间为80min时,酸浸渣相对脱水率可达到98.32%。实验研究对促进酸浸渣中有价金属的资源综合利用、改善环境等具有重要的指导意义。     

Bio-oil production by fast pyrolysis of cassava residues in a free-fall reactor using liquid media-assisted condensation

We investigated the influence of liquid media-assisted condensation on the bio-oil yield using biomass derived from cassava rhizomes and stalks in a free-fall reactor. Benzene, diesel, engine lubricant, and ethanol were tested as the liquid medium. Exposure times varied from 60 to 120 min with biomass feed rates from 100 to 250 g/h. Engine lubricant and ethanol tended to decrease biomass yield while increasing gas yield. Benzene and diesel showed slightly increased biomass yield. With benzene, the bio-oil water content (28%) was insignificantly different from that without using any condensation substance. However, with diesel, the water content increased very slightly; with engine lubricant, it decreased to 25%; and with ethanol, it significantly decreased to 12%. Also, using diesel generated higher heating values (30 MJ/kg).