Dynamic model of the flip-flow screen-penetration process and influence mechanism of multiple parameters

Flip-flow screening is an important method for classifying fine particles. The traditional research of flip-flow screening focuses on the final screening results, and neglects the screen-penetration process. However, the screen-penetration process directly affects the final screening effect. In this paper, a dynamic model of the flip-flow screen-penetration process was proposed and clarified the influence mechanism of main structural parameters on the screening process. First, based on theoretical derivation and regression fitting, the mathematical model of particle screen-penetration rate and screening time was established, and the dynamic evaluation index was obtained. Then, the effect of main structural parameters, namely, the excitation frequency, displacement excitation amplitude, and stretching amount of the screen plate, on the dynamic indexes, was explored. Furthermore, a quadratic polynomial model of the main structural parameters and the two-stage dynamic evaluation index were established by using the response surface method. The explicitness and interactivity of the effects of parameters were elucidated. This work is of great significance for the accurate control of the screening process.     

Foam-based cleaning of surfaces contaminated with mixtures of oil and soot

Liquid foams of intermediate stability have been shown to be very efficient in the cleaning of sensitive surfaces because of the synergy between imbibition and foam decay. While we quantified these mechanisms for contaminations with liquid oils in our previous work, we show here their extension to oils containing soot particles in an effort to simulate increasingly realistic contaminations. Using foams with a wide range of liquid fractions and with different stabilities, we show that the main cleaning mechanisms remain very similar, with the oil entraining the soot particles. However, we find much less efficient soot removal when the liquid channels of the foams are small enough to hinder efficient transport of the soot particles.     

岳纸PM8 Optisizer生产实践

Optisizer在生产实践过程中的维护和操作控制关系到其是否正常稳定运行,本文主要介绍了施胶辊更换后的调试和断纸后的操作注意事项,以及运行过程中存在的亮线问题的一些探讨。     

气瓶内部淬火过程的流动换热特性

 大直径厚壁气瓶内部淬火时的流动换热过程极其复杂，受到多种因素的影响，而研究气瓶内部压强和温度的变化规律对改善流动换热效果、提高产品组织性能具有重要的理论指导意义。以914 mm厚壁气瓶和瓶内流体为研究对象，建立了二维等效流 固耦合模型；采用多喷嘴系统对气瓶内外进行喷水淬火，研究了气瓶总长、喷水流速及淬火时间对瓶内压强及内壁温度的影响，通过间歇淬火试验验证了数学模型的正确性。结果发现，气瓶长度对瓶内压强和瓶壁温度的影响显著，喷水流速次之，当喷水流速大于8 m/s后，水量对瓶壁的冷却效果大大降低；气瓶内壁长度方向的温度梯度分别随气瓶总长的增加和淬火时间的延长而减小，但基本不受喷水量的影响。     

Off-Pathway-Sensitive Protein-Splicing Screening Based on a Toxin/Antitoxin System

Protein-splicing domains are frequently used engineering tools that find application in the in vivo and in vitro ligation of protein domains. Directed evolution is among the most promising technologies used to advance this technology. However, the available screening systems for protein-splicing activity are associated with bottlenecks such as the selection of pseudo-positive clones arising from off-pathway reaction products or fragment complementation. Herein, we report a stringent screening method for protein-splicing activity in cis and trans, that exclusively selects productively splicing domains. By fusing splicing domains to an intrinsically disordered region of the antidote from the Escherichia coli CcdA/CcdB type II toxin/antitoxin system, we linked protein splicing to cell survival. The screen allows selecting novel cis- and trans-splicing inteins catalyzing productive highly efficient protein splicing, for example, from directed-evolution approaches or the natural intein sequence space.     

浅谈液压夹具在转向油缸铸造缸盖加工上的应用

随着液压夹具在机械加工中运用推广,该公司引用液压夹具多年来取得一定成效,文章针对转向油缸的铸造缸盖铣、钻序前后加工工装进行对比分析,重点突出应用全自动液压夹具后可提升装夹效率、加工质量以及降低劳动强度等,可以在不添置设备的情况下,满足产能提升的需求。     

Combined application of electrolysed water and ultrasound to improve the sanitation of knives in the meat industry

This study investigated the effect of the combination of basic electrolysed water (BEW) and slightly acid electrolysed water (SAEW) with ultrasound (US) for cleaning and sanitation of the knives used in slaughtering processes. The knives were sonicated in a US bath using two modes of operation (normal and sweep) in two steps: (i) 5 min with BEW and (ii) 10 min with SAEW at 35 °C. The microbiological counts and the possible changes in the physical structure of the knives were evaluated. The association BEW + SAEW + US, in the sweep mode, provided lower mesophilic, enterobacterial, Staphylococcus aureus and yeast counts when compared to the values recommended by the international legislation. In addition, these conditions removed all organic residues from the knife blades and promoted the highest migration rate of the residues to the US water bath (12.35 mg/L·min), without modifications in the knife blades. Thus, cleaning and sanitation of knives was feasible with the association of BEW + SAEW + US, which could be a useful alternative for the meat industry.     

临涣选煤厂粗煤泥回收工艺优化的实践应用

临涣选煤厂针对洗选过程中存在的精煤泥旋流器组溢流跑粗、精煤泥弧形筛筛下水跑粗、精煤泥弧形筛脱水效果较差等问题，重点开展精煤泥分级旋流器组入料分配不均匀、筛分错配物影响、弧形筛脱水效果的现场攻关和研究。现场大量试验表明:通过停止精煤泥旋流器组，增加精煤泥弧形筛数量、减小筛缝尺寸，改变精煤泥弧形筛击打，改用高频脱水筛等方式，从源头上解决了精煤泥分级旋流器组跑粗，明显改善了精煤泥弧形筛筛下水跑粗的问题，提高了精煤泥弧形筛分选效果。在降低介泥灰分、减少浮选过程中粗颗粒的含量、缓解浮选回收压力、降低降低浮选油耗、提高浮选精煤灰分、保证精煤产率、节约生产成本方面有实践意义。     

废磺酸的处理技术

废磺酸由于色泽深、酸值高、游离油高等问题,无法正常应用于洗涤剂中,又因其是强的有机酸,属于危化品,无法倾倒、无法储存,日积月累,大量的废磺酸处理成为企业棘手的问题。本文通过中和和漂白工艺,将其应用于工业清洗中,解决了企业难题。