Microbial fuel cell (MFC)-based biosensor for combined heavy metals monitoring and associated bioelectrochemical process

To explore the feasibility and related mechanism of MFC biosensor for wastewater detection under the action of combined heavy metals. Cyclic voltammetry (CV) and scanning electrochemical impedance spectroscopy (EIS) were used to explore the related bioelectrochemical process. The response of the reactor to single/combined heavy metals, low/high heavy metal concentrations, and the differences in ohmic resistance (Rs) and charge transfer resistance (Rct) were investigated using Ni as the core heavy metal and the combined action of Cd, Cu and Zn. The results indicated that there was a linear relationship between the concentration and output voltage of the MFC biosensor under the action of combined heavy metals (R² = 0.8803–0.973). However, the internal resistance (Rint) of the MFC biosensor under the action of single heavy metal was far less than that of the combined heavy metal group, and the power density (19.849 W m^?3) was 4 times that of the combined heavy metal group (3.109–4.589 W m^?3). The Rs of the biosensors in the combined heavy metal group were 0.868Ω and 0.860, which were higher than 0.768Ω of the single heavy metal sensor. With the increase of the concentration of heavy metals in the influent, the increase of Rct was more obvious in the combined group, while the Rs in the single group significantly increased (P < 0.05). The results imply that it is possible for MFC biosensors to be used in the detection of actual water polluted by various heavy metals, but the biosensor performance is mainly limited by Rct, which needs to be further improved.     

水力空化改质对重质原油沥青质及性质的影响

利用水力空化过程产生局部的高温、高压、高射流以及强大的剪切力等极端化学物理条件改质处理沙特重质原油，试验结果表明：沙特重质原油经过水力空化改质后粘度由13.61降低至7.22mm2/s，残碳由7.16%降低至6.48%，实沸点蒸馏后减压渣油降低1个百分点。进一步采用APPI FT-IR MS、XRD、FT-IR、SEM和粒度分布等技术研究了水力空化改质对沙重原油分子组成，沥青质团聚体微晶结构、沥青质胶束粒径分布、沥青质官能团、沥青质形貌等方面的影响，从分子角度阐述空化改质重油的机理。研究结果表明：水力空化改质后沙重原油分子量分布、芳烃类化合物缔合作用变小；沥青质对低DBE化合物吸附性能降低；沥青质团聚体微晶结构更加松散；沥青质胶束粒度分布降低；沥青质分子相互团聚作用力减弱。进一步考察了水力空化改质前后减压渣油延迟焦化性能，改质处理后焦炭产率降低1.85个百分点，液体收率和气体产率分别增加1.52和0.33个百分点，水力空化改质对沥青质性质、结构特点的改善能够有效的提高其加工性能。     

Effect of nickel concentration on biohydrogen production: Organic solid waste vs. glucose

In recent years, alternative renewable energy generation sources have been investigated, highlighting the dark fermentation process due to it’s potential to obtain hydrogen-rich gas, which can be used as an energy source. Different trace metals intervene in this biological process. Nickel is one of the most important because it is a component of the [Ni–Fe] hydrogenase enzyme that catalyzes the oxidation of H₂ in numerous bacteria. The aim of this study was to evaluate the effect of nickel on biohydrogen production from organic solid waste (OSW). The experimental setup was carried out in batch tests using OSW as the substrate, glucose as a reference compound and the valuation of Ni²⁺ doses on the operation in a Sequencing Batch Reactor. The results of the batch tests showed that when using glucose as a substrate, 2 mg Ni²⁺/g VS_inoculum generated the highest hydrogen production (774 ± 7.3 mL H₂/L/d) and highest yield (55.8 ± 3.4 mL H₂/g of glucose), which was 34.4% higher than the control. Testing of different concentrations of nickel using OSW as a carbon source showed that the highest production was obtained without Ni²⁺ addition since the nickel concentration in the residue was 0.17 ± 0.06 mgNi/gVS; consequently, hydrogen production was not affected by the lack of Ni. The addition of 0.5 mg Ni²⁺/g VS_inoculum decreased acetate and butyrate production and increased caproate production.     

Nanoporous Surface High-Entropy Alloys as Highly Efficient Multisite Electrocatalysts for Nonacidic Hydrogen Evolution Reaction

Electrocatalytic hydrogen evolution in alkaline and neutral media offers the possibility of adopting platinum-free electrocatalysts for large-scale electrochemical production of pure hydrogen fuel, but most state-of-the-art electrocatalytic materials based on nonprecious transition metals operate at high overpotentials. Here, a monolithic nanoporous multielemental CuAlNiMoFe electrode with electroactive high-entropy CuNiMoFe surface is reported to hold great promise as cost-effective electrocatalyst for hydrogen evolution reaction (HER) in alkaline and neutral media. By virtue of a surface high-entropy alloy composed of dissimilar Cu, Ni, Mo, and Fe metals offering bifunctional electrocatalytic sites with enhanced kinetics for water dissociation and adsorption/desorption of reactive hydrogen intermediates, and hierarchical nanoporous Cu scaffold facilitating electron transfer/mass transport, the nanoporous CuAlNiMoFe electrode exhibits superior nonacidic HER electrocatalysis. It only takes overpotentials as low as ≈240 and ≈183 mV to reach current densities of ≈1840 and ≈100 mA cm⁻² in 1 m  KOH and pH 7 buffer electrolytes, respectively; ≈46- and ≈14-fold higher than those of ternary CuAlNi electrode with bimetallic Cu–Ni surface alloy. The outstanding electrocatalytic properties make nonprecious multielemental alloys attractive candidates as high-performance nonacidic HER electrocatalytic electrodes in water electrolysis.     

富芳烃重油组分结构调变对中间相沥青形成的影响机制

对重油富芳烃组分转化为次生沥青及其氢化改性沥青的热转化行为进行了比较，并对热转化过程中体系化学结构组成特征对中间相形成的影响进行了研究。采用红外光谱及氢核磁共振波谱，对比分析了次生沥青及其氢化改性沥青的化学结构组成特征；借助偏光显微镜、X射线衍射，考察了两体系中间相沥青的形成过程。结果表明：控制体系短烷基侧链含量可有效抑制过度炭化的发生，提高炭化产物的微观有序度；短烷基侧链可以持续稳定释放出小分子自由基，对大分子自由基反应进行调控，显著提升炭化产物微观结构的均一性。     

Application of ferrous sulfate alleviates negative impact of cadmium in rice (<i>Oryza sativa</i> L.)

Soil contamination with toxic heavy metals [such as cadmium (Cd)] is becoming a serious global problem due to rapid development of social economy. Iron (Fe), being an important element, has been found effective in enhancing plant tolerance against biotic and abiotic stresses. The present study investigated the extent to which different levels of Ferrous sulphate (FeSO₄) modulated the Cd tolerance of rice (Oryza sativa L.), when maintained in artificially Cd spiked regimes. A pot experiment was conducted under controlled conditions for 146 days, by using natural soil, mixed with different levels of CdCl₂ [0 (no Cd), 0.5 and 1 mg/kg] together with the exogenous application of FeSO₄ at [0 (no Fe), 1.5 and 3 mg/kg] levels to monitor different growth, gaseous exchange characteristics, oxidative stress, antioxidative responses, minerals accumulation, organic acid exudation patterns of O. sativa. Our results depicted that addition of Cd to the soil significantly (P < 0.05) decreased plant growth and biomass, gaseous exchange parameters, mineral uptake by the plants, sugars (soluble, reducing, and non-reducing sugar) and altered the ultrastructure of chloroplasts, plastoglobuli, mitochondria, and many other cellular organelles in Cd-stressed O. sativa compared to those plants which were grown without the addition of Cd in the soil. However, Cd toxicity boosted the production of reactive oxygen species (ROS) by increasing the contents of malondialdehyde (MDA), which is the indication of oxidative stress in O. sativa and was also manifested by hydrogen peroxide (H₂O₂) contents and electrolyte leakage to the membrane bounded organelles. Although, activities of various antioxidative enzymes like superoxidase dismutase (SOD), peroxidase (POD), catalase (CAT) and ascorbate peroxidase (APX) and non-enzymatic antioxidants like phenolics, flavonoid, ascorbic acid, anthocyanin and proline contents increased up to a Cd level of 0.5 mg/kg in the soil but were significantly diminished at the highest Cd level of 1 mg/kg in the soil compared to those plants which were grown without the addition of Cd in the soil. The negative impacts of Cd injury were reduced by the application of FeSO₄ which increased plant growth and biomass, improved photosynthetic apparatus, antioxidant enzymes, minerals uptake together with diminished exudation of organic acids as well as oxidative stress indicators in roots and shoots of O. sativa by decreasing Cd retention in different plant parts. These results shed light on the effectiveness of FeSO₄ in improving the growth and upregulation of antioxidant enzyme activities of O. sativa in response to Cd stress. However, further studies at field levels are required to explore the mechanisms of FeSO₄-mediated reduction of the toxicity of not only Cd, but possibly also other heavy metals in plants.     

Oil Demand and Stocks

Current data of world oil demand. This includes international bunkers and refinery fuel. Updated on a monthly basis. Current data of oil demand from counties such as Canada, the United States of America, Japan, OECD Europe, Belgium, France, Germany, Italy, Netherlands, Spain, Sweden, the United Kingdom, Australia, Mexico, Republic of Korea, and Turkey. Updated on a monthly basis. Current data for crude oil and refined product stocks in Canada, Chile, Mexico, the United States (Western Hemisphere), France, Germany, Italy, Netherlands, Spain, the United Kingdom and Other Europe (Europe), Japan, Republic of Korea, Other Pacific (Asia‐Pacific), and Total OECD (Table 12.1) Current data for refined product stocks in the OECD Western Hemisphere, OECD Europe, OECD Asia‐Pacific and Total OECD. Products include gasoline, diesel and gasoil, and heavy fuel oil. Updated on a monthly basis (Table 12.2).     

表面离子印迹聚合物金属离子吸附材料研究进展

离子印迹聚合物吸附材料对模板离子具有强识别能力，对其可实现高选择吸附，因而离子印迹技术常用于制备高选择性吸附材料。但传统方法制备的离子印迹吸附材料，因识别位点容易被包埋导致其吸附容量小、吸附-脱附速率低，而表面离子印迹技术则是采用模板离子和聚合单体直接在载体表面或附近区域构筑选择性识别位点，所有活性位点均暴露，从而有效地解决了上述问题。本文从技术原理与合成原料、制备工艺方法以及载体材料类型等方面对表面印迹聚合物吸附材料近期研究进展情况进行了概述。针对相关研究现状，从载体材料、功能单体、目标离子等角度分析和讨论了表面离子印迹聚合物吸附材料当前发展中的不足及其所面临的挑战，并对表面离子印迹技术发展趋势和前景进行了展望。     

基于核酸适配体分析方法结合纳米材料监测食品有毒重金属的研究进展

重金属具有高毒性,尽管它们在各种环境基质中以微量浓度存在,但是其引起的污染仍可能会对环境和人体造成严重的损害。因此,开发重金属检测精确而灵敏的方法对食品中重金属的检测十分有必要。现有传统检测技术依赖昂贵的大型仪器,操作复杂并且耗时较长。生物技术和纳米材料的飞速发展为重金属的检测提供了一种新思路。该文综合介绍重金属检测的常见方法以及近年来核酸适配体和纳米材料在食品中重金属检测应用的研究进展,并对未来的发展前景进行展望。