Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

The effect of rice bran on physicochemical,textural and glycaemic properties of ready-to-eat extruded corn snacks

In this work, corn extruded snack products were enriched with rice bran (RB) at 10% and 15%. A co-rotating twin-screw extruder was used with a feed moisture content of 16 g 100 g⁻¹, a screw speed of 240 r.p.m. and four heating sections of the barrel (100, 140, 150 and 150 °C). The impact of RB inclusion on nutritional profile, starch digestion, physicochemical and textural properties of snack products was evaluated. RB-enriched extrudates showed a lower specific volume and hardness and higher crispness than control. RB at 15% gave a water-holding capacity lower than control. Rheology of extrudate dispersions indicated an increase in elastic interactions and solid-like behaviour with RB supplementation. Differences in rheological properties resulted in attenuation of predictive glycaemic response for RB-enriched snacks.     

Influence of Impurities and Oxidation on Hydroconversion of Waste Cooking Oil into Bio-jet Fuel

The influences of impurities and oxidation evolution of waste cooking oil on the preparation of bio-jet fuel via hydroconversion were studied. The hydrogenation active sites and acid sites were covered by heavy metals, sulfides, and basic nitrogen compounds, resulting in the increase of selectivity for bio-jet fuel by decreasing the selectivity of diesel, aromatics, and iso-alkanes. The effects of impurities, oxidation on the reaction pathway, and product distribution became more distinct with higher catalyst acidity. The evolution and variation of naphthalene, indan, and phenanthrene obtained from cyclic fatty acids influenced the properties of fuel or evoked the catalyst deactivation. This work will help to design new catalysts for selective conversion of waste cooking oil into bio-jet fuel.     

Activated Carbon Supported CaO from Waste Shells as a Catalyst for Biodiesel Production

In the wake of increasing environmental constraints, this work is aimed at developing a catalyst purely prepared from waste biomass source as the raw material. The catalyst is investigated for its applicability in transesterification of vegetable oil with the objectives: (i) to use waste shells of mollusk as raw material for the preparation of activated carbon and CaO; (ii) to use it as heterogeneous catalyst in the transesterification of waste cooking oil; (iii) to optimize the different parameters affecting the transesterification reaction; and (iv) to study its reusability. Under optimized conditions it was observed that a conversion >90% was possible and the catalyst could be reused five times with a slight loss in activity. This study indicates that the biomass source could also be used as a potential raw material in the synthesis of environmentally benign catalysts.     

Detection of fresh palm oil adulteration with recycled cooking oil using fatty acid composition and FTIR spectral analysis

There is a growing concern over the food safety issue related to increased incidence of cooking oil adulteration with recycled cooking oil (RCO). The objective of this study was to detect fresh palm olein (FPO) adulteration with RCO using fatty acid composition (FAC) and Fourier-transform infrared spectroscopy (FTIR) spectral analyses combined with chemometrics. RCO prepared in the laboratory was mixed with FPO in the proportion ranged from 1% to 50% (v/v) to obtain the adulterated oil samples (AO). FACs for FPO, RCO, and AO were determined using gas chromatography equipped with a flame ionization detector (GC-FID). The compositions of most fatty acids in RCO lied within the normal ranges of Codex standard, except for C8:0, C10:0, C11:0, C15:0, trans C18:1, and polyunsaturated fatty acids (PUFAs), C20:5. PUFAs showed a consistent decreasing trend with increasing magnitude of change with respect to increasing adulteration level and thus might be a good indicator for detecting FPO adulteration with RCO. The evaluation parameters (coefficient of determination, root mean standard error) of the FTIR-partial least square (PLS) model of palm oil adulteration with recycled oil are R² = 0.995 and 3.25, respectively. For FTIR spectral analysis, the distinct variations in spectral regions and aberrations in characteristic bands between FPO and RCO were observed. The optimized PLS calibration model developed from normal spectral of the combined region at 3602–3398, 3016–2642, and 1845–650 cm^?1 overpredict the adulteration level. On the other hand, the discriminant analysis classification model was able to classify the FPO and AO into two distinct groups. Improvement of the principles of combined techniques in authenticating AO from fresh oil is beneficial as a guideline to detect adulteration in cooking oil.     

Flame spectroscopy of waste tire oils and waste cooking oils blends using coaxial burner

Waste tires and cooking oil pose a serious danger to human health and environment. Self-reacting pyrolysis system for waste tires is designed and constructed for converting waste tires into oil that could be used as a sustainable fuel. This study aims to analyze the thermal microstructure of conventional fuels like light diesel oil (LDO) and heavy diesel oil (HDO) as well as blended with waste cooking oil (WCO) and tires pyrolysis oil (TPO) using a co-axial burner via flame spectroscopy analysis. The first Blend 1 (B1) consists of 20% WCO + 80% LDO, the second one (B2) consist of 20% WCO+80%HDO and the last one (B3) was 20%TPO and 80% LDO by mass. This percentage was chosen carefully and according to previous combustion characteristics results. The experimental results showed that B1 will shrink C2 radicals by nearly 61% and 64.5% at Ф = 0.63 and 0.96 respectively. B2 will decrease C2 radicals by nearly 19% and 82% at Ф = 0.63 and 0.96 respectively. Finally, B3 will reduce C2 radical's intensity by nearly 39% and 58% at Ф = 0.63 and 0.96 respectively. TPO produced CH emission radicals lower than that of LDO by nearly 5.9%. LDO droplets absorbed more radiation energy needed for excitation than that of WCO due to droplet size and fuel physic-chemical properties. B2 fuel is recommended to replace LDO at Ф = 0.63 and 0.96.     

Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.     

Association of solid fuel use with risk of stunting in children living in China

Stunting adversely affects physical and mental outcomes of children. It has not been examined whether household air pollution from solid fuel combustion is a risk factor for stunting in children. In a total of 41,439 children aged 6-17 across China, height was measured using a unified protocol. Multivariable linear regression models and logistic regression models were used to assess the associations of solid fuel use for cooking/heating with stunting in children. Adjusted for covariates, cooking/heating with solid fuel was significantly associated with a lower z-score for height for age and sex (β = −0.21 [−0.32 to −0.09] and −0.17 [−0.31 to −0.03], respectively) and an increased risk of stunting with an estimated ORs of 1.34 [1.07~1.68] and 1.37 [1.02~1.83], respectively. The risk of stunting associated with solid fuel use was statistically significant in high-age children. And the effect was greater on girls than on boys, though the difference was not statistically significant. Our study suggested that Chinese children living in households using solid fuel had a significantly higher risk of stunting than those living in households using cleaner fuel.     

Angiotensin I‐converting enzyme inhibitory and Ca‐binding activities of peptides prepared from tuna cooking juice and spleen proteases

Tuna cooking juice is a by‐product from the tuna canning industry. In this study, tuna cooking juice was hydrolysed by proteases extracted from the spleen. Tuna cooking juice showed the highest ACE inhibitory and Ca‐binding activities after hydrolysis for 270 and 180 min, respectively. The hydrolysate was further fractionated by ultrafiltration. The permeate exhibited highest ACE inhibitory and Ca‐binding activities when passed through 1 and 5 kDa cut‐off membranes, respectively. Gel filtration chromatography was used to determine the MW of bioactive peptides that exhibited highest ACE inhibitory and Ca‐binding activities. Those peptides that exhibited highest ACE inhibitory and Ca‐binding activities were the MW range of 238–829 Da and 1355–1880 Da, respectively. These results suggest that the tuna cooking juice and the spleen protease extract are a potential source of bioactive peptides that can be utilised as bioactive ingredients in functional food and nutraceuticals.     

Statistical optimization of biodiesel production from sunflower waste cooking oil using basic heterogeneous biocatalyst prepared from eggshells

A statistical design of experiments DOE was applied to investigate biodiesel fuel BDF production process from sunflower waste cooking oil SWCO using heterogeneous bio-catalyst produced from eggshells ES. It was based on 3 level D-optimal design involving as factors methanol:oil M:O molar ratio, catalyst concentration (wt%), reaction time (min) and mixing rate (rpm). Twenty runs were carried out. A predictive linear interaction model has been correlated finding out how significant the effects of these variables are in practice. LINGO software was used to find out the optimum values of the aforementioned variables for enhancing the process. According to the results obtained, the most dominant positive factor influencing the response variable (% BDF yield) was M:O molar ratio followed by catalyst concentration (wt%) and mixing rate in a decreasing order while the reaction time showed to have a negative effect on the yield. The maximum BDF yield (98.8% and 97.5%, predicted and experimental, respectively) was obtained at M:O 6:1 M ratio, catalyst concentration 3 wt%, reaction time 30 min, mixing rate 350 rpm and 60 °C. Also response surface methodology RSM has been applied to study the interactive effects of independent variables on BDF yield. It was found that, the interaction between M:O and catalyst concentration (wt%) has more significant effect than interaction between other variables. The activity of the produced bio-catalyst was comparable to that of chemical CaO and immobilized enzyme Novozym 435. All the physicochemical characteristics of the produced BDF using the prepared bio-catalyst and its blends with petro-diesel fuel PDF are completely acceptable and meet most of the required standard specifications.