Status and initial experiments of DRAGON-V facility for lithium-lead blanket technologies of hydrogen fusion reactors

A dual-coolant integrated experimental facility named DRAGON-V has been developed at the Institute of Nuclear Energy Safety Technology, Hefei Institute of Physical Science, Chinese Academy of Sciences, for the key technology research and performance evaluation of candidate liquid lithium-lead (PbLi) blanket of hydrogen fusion reactors. The loop is composed of a material test sub-loop and thermal-hydraulic test sub-loop, the design parameters are PbLi inventory 20 tons, PbLi temperature up to 550 °C, the maximum PbLi flow rate up to 40 kg/s. A novel cold trap system is designed to remove the suspended and crystalized impurities in PbLi fluid with three cooling zones and cross row arrangement of rod bundle filter elements. The paper describes the loop itself and its major components, initial loop testing, flow and measurement diagnostics and current experiments. The obtained test results of the loop and its components have demonstrated that the new facility is fully functioning and ready for experimental studies of material corrosion with/without a magnetic field, magnetohydrodynamic (MHD) effect, purification, heat and mass transfer phenomena in PbLi flows and can also be used in mock-up testing in conditions relevant to fusion applications.     

Microstructural and mechanical properties assessment of transient liquid phase bonding of CoCuFeMnNi high entropy alloy

The transient liquid phase (TLP) bonding of CoCuFeMnNi high entropy alloy (HEA) was studied. The TLP bonding was performed using AWS BNi-2 interlayer at 1050 °C with the TLP bonding time of 20, 60, 180 and 240 min. The effect of bonding time on the joint microstructure was characterized by SEM and EDS. Microstructural results confirmed that complete isothermal solidification occurred approximately at 240 min of bonding time. For samples bonded at 20, 60 and 180 min, athermal solidification zone was formed in the bonding area which included Cr-rich boride and Mn₃Si intermetallic compound. For all samples, the γ solid solution was formed in the isothermal solidification zone of the bonding zone. To evaluate the effect of TLP bonding time on mechanical properties of joints, the shear strength and micro-hardness of joints were measured. The results indicated a decrement of micro-hardness in the bonding zone and an increment of micro-hardness in the adjacent zone of joints. The minimum and maximum values of shear strength were 100 and 180 MPa for joints with the bonding time of 20 and 240 min, respectively.     

基于C#持久蠕变强度外推功能的实现

持久蠕变强度外推是预测材料在高温高压环境下工作寿命的有效方法。目前常用的外推方法有等温法和参数法。这两种方法都是通过在实验室中采用较短时间的试验，获取试验数据后，通过Excel或者MATLAB等数据处理软件进行数据的拟合处理和外推计算。这些数据归纳统计和数学建模的过程有时需要耗费试验人员的大量精力。介绍了持久蠕变强度外推的软件实现方法，该功能包含在持久蠕变试验设备配备的软件中，试验完成后，软件直接根据试验结果进行数据拟合和持久蠕变强度的外推计算，无需试验数据的统计和建模，大大提高了持久蠕变强度外推计算的效率。     

等温退火对8030铝合金导线组织性能的影响

研究了不同等温退火工艺对8030铝合金导线组织及性能的影响。结果表明:等温退火前后合金均由α-Al基体和Al₆Fe相组成。在同一等温温度下,随着等温时间的延长组织逐渐趋于均匀化;同一等温时间下,随着等温温度的升高,组织趋于均匀化的时间缩短。经过等温退火处理后铝合金导线的导电率均有所提高,在470 ℃均匀化退火24 h后再经240 ℃等温4 h,合金导电率达到最高值57.21%IACS,比未经热处理试样的导电率提高了2.4%IACS。经过等温退火处理后铝合金导线的硬度及抗拉强度均有所降低,塑性大幅度提高。在470 ℃均匀化退火24 h后再经260 ℃等温8 h,合金的伸长率最高可达23.64%。热处理前后合金均为塑性断裂。     

基于单片机C8051F500的无刷直流电机控制研究

永磁无刷直流电机是近些年发展起来的一种新型电机,具有效率高、调速性能好、启动转矩大等诸多优点,在运动控制领域中的应用日趋广泛。基于电机专用控制芯片MC33035,采用单片机C8051F500为主控芯片,设计一款无刷直流电机智能控制器,实现对无刷直流电机启动停止、正反转、调速、转速显示等控制。通过简要介绍无刷直流电机工作原理,使用MATLAB/Simulink对控制系统进行建模仿真,对无刷直流电机控制系统进行软、硬件设计。实验结果表明,该控制系统运行稳定,抗干扰性强,具有良好的市场应用价值。     

Nature inspired supply chain solutions: definitions,analogies, and future research directions

ABSTRACT

Supply chains are becoming increasingly complex, and many companies and researchers are looking to nature for finding solutions. In this paper, we provide a narrative synthesis and systematic review to explore state-of-the-art, and identify key areas for exploration of nature inspired solutions in the supply chain area. We consider strategic, tactical, and operational decisions within supply chains and identify analogies between biological systems and supply chains to create a new research agenda. Our findings show that the majority of the research in nature inspired supply chains from the systemic perspective focuses on closed loop supply chains. In contrast, similar systemic solutions such as industrial symbiosis, circular economy, and industrial ecology have not been explored as frequently. Reducing production waste (industrial symbiosis) in addition to end-of-life product waste (closed loop supply chains), optimising raw material use and extending the life of used resources (circular economy), investigating the interactions between biosphere and technosphere (industrial ecology), and seeking solutions to industrial problems from nature (biomimicry) are all possible paths for reaching a zero-waste economy. These systemic solutions have a considerable impact on the supply chains at the strategic, tactical, and operational levels, which need to be explored to identify efficient and effective solutions.     

等温滴定量热法探索酪蛋白磷酸肽单体与不同钙盐的相互作用

本研究探讨了在模拟小肠末端环境下酪蛋白磷酸肽（β-casein phosphopeptides(1-25)，简称CPP）与不同钙盐的相互作用情况。实验以等温滴定量热仪为方法，以热力学参数、化学计量数及亲和力常数为指标，评价不同钙盐与CPP的相互作用情况。结果表明，CPP与不同钙盐两两相互作用，且均为由熵驱动的自发反应（pH 8.0，37 ℃），该反应的主要推动力为离子相互作用力。不同钙盐与CPP反应时，焓变，熵变及自由能无明显差别（p>0.05），而化学计量数和亲和力常数存在显著性差异（p<0.05）。CPP与葡萄糖酸钙，乳酸钙和氯化钙相互作用时，化学计量数较高（3~4 mol/mol），而与天冬氨酸钙结合的化学计量数较低（2~3 mol/mol）。此外，相比其他钙盐，乳酸钙与CPP结合的亲和力常数最低。多肽与钙盐结合数高且亲和力较低时有利于小肠对钙的吸收。因此，相对于其他钙盐，CPP与乳酸钙结合可能更有利于小肠对钙的吸收。本研究为更好地了解CPP与不同钙盐溶液在模拟小肠末端环境下的热力学变化及结合情况奠定坚实的基础。