Spurenstoffabtrennung mit keramischen Nanofiltrationsmembranen als Rotationsscheibenfilter

Reducing micropollutant pollution of water bodies is an important objective of water management and an integral part of environmental policy. Ceramic nanofiltration membranes were developed as multichannel membranes of increased membrane area and rotating disk filters. The membranes developed show retention of over 80 % for PEG 400. The membranes are currently being tested for the separation of micropollutants from wastewater contaminated with pharmaceuticals. With the help of a downstream oxidative process, the trace substances remaining in the permeate are degraded.     

纳滤法制备高纯度雪莲果低聚果糖及其结构表征

采用纳滤分离技术以雪莲果为原料纯化低聚果糖，通过Box-Behnken中心组合设计（CCD）及响应面分析（RSM）建立预测低聚果糖纯度的二次多项数学模型，优化分离纯化工艺。结果表明：操作压力0.15 MPa，循环流量5.3 mL/min，pH值2.7时，纯化倍数为5，实际低聚果糖纯度为95.1%，达到P级产品标准。通过应用HPLC-MS、IR、¹H NMR及¹³C NMR等对雪莲果低聚果糖组分的纯度、组成、结构进行表征，结果表明：分离纯化得到的雪莲果低聚果糖由蔗果三糖、蔗果四糖和蔗果五糖组成，纯度为95.1%，平均包含5个果糖单元，主要是由β-呋喃构型的果糖组成。     

Chemically Tailored Multifunctional Asymmetric Isoporous Triblock Terpolymer Membranes for Selective Transport

Membrane-based separation of organic molecules with 1–2 nm lateral dimensions is a demanding but rather underdeveloped technology. The major challenge is to fabricate membranes having distinct nanochannels with desired functionality. Here, a bottom-up strategy to produce such a membrane using a tailor-made triblock terpolymer featuring miscible end blocks with two different functional groups is demonstrated. A scalable multifunctional integral asymmetric isoporous membrane is fabricated by the solvent evaporation-induced self-assembly of the block copolymer combined with nonsolvent-induced phase separation. The membrane nanopores are readily functionalized using positively and negatively charged moieties by two straightforward gas–solid reactions. The pores of the post-functionalized membranes act as target-specific functional soft nanochannels due to swelling of the polyelectrolyte blocks in a hydrated state. The membranes show unprecedented separation selectivity of small molecules based on size and/or charge which demonstrates the potential of the proposed strategy to prepare next-generation nanofiltration membranes.     

Thin-film composite crosslinked polythiosemicarbazide membranes for organic solvent nanofiltration (OSN)

In this work we report a new class of solvent stable thin-film composite (TFC) membrane fabricated on crosslinked polythiosemicarbazide (PTSC) as substrate that exhibits superior stability compared with other solvent stable polymeric membranes reported up to now. Integrally skinned asymmetric PTSC membranes were prepared by the phase inversion process and crosslinked with an aromatic bifunctional crosslinker to improve the solvent stability. TFC membranes were obtained via interfacial polymerization using trimesoyl chloride (TMC) and diaminopiperazine (DAP) monomers. The membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and contact angle measurement.The membranes exhibited high fluxes toward solvents like tetrahydrofuran (THF), dimethylformamide (DMF) and dimethylsulfoxide (DMSO) ranging around 20 L/m² h at 5 bar with a molecular weight cut off (MWCO) of around 1000 g/mol. The PTSC-based thin-film composite membranes are very stable toward polar aprotic solvents and they have potential applications in the petrochemical and pharmaceutical industry.     

TiO2-incorporated polyelectrolyte composite membrane with transformable hydrophilicity/hydrophobicity for nanofiltration separation

The wettability of the membrane surface has shown obvious influent on the separation performance of the membrane. In this work, a hydrophilic PDA-[PDDA/TiO₂]⁺ Cl⁻ membrane was prepared by a one-step codeposition of poly(diallyldimethylammonium chloride) (PDDA) polyelectrolyte solution containing positively charged TiO₂@PDDA nanoparticles with the assistance of dopamine (DA). Such positively charged membrane can be transformed into a hydrophobic membrane PDA-[PDDA/TiO₂]⁺ PFO⁻ via the counterion exchange between Cl⁻ and PFO⁻ (perfluorooctanoate). The transformation between hydrophilicity and hydrophobicity is reversible. For both hydrophilic and hydrophobic membranes, the nanofiltration performances were respectively investigated by the aqueous solution and ethanol solution of dyes including methyl blue (MB), Congo red (CR) and Evans blue (EB), and as well metal salt aqueous solution. The consecutive running stability and anti-fouling performance of both hydrophilic and hydrophobic membranes were explored. The results revealed that both membranes showed high nanofiltration performances for retention of dyes in (non)aqueous solution. For the hydrophilic membrane, the rejection of salts in a sequence is MgSO₄ > Na₂SO₄ > MgCl₂ > NaCl. Moreover, both of the hydrophilic and hydrophobic membranes showed high stability and antifouling property.     

界面聚合聚酰胺纳滤膜渗透选择性能优化的研究进展

纳滤因其分离效率高、操作压力低、环境友好等优点，在废水处理、海水淡化和工业分离纯化等众多领域有着重要的应用。界面聚合法制备的聚酰胺（PA）纳滤膜是最为常用的纳滤膜种类之一。然而界面聚合反应速度快，如何通过调控界面聚合过程，优化纳滤膜选择分离层的结构从而提高渗透选择性，以满足不同领域对纳滤膜需求仍是亟需解决的问题。本文从影响界面聚合单体扩散因素的角度出发，综述了近年来PA纳滤膜渗透选择性能优化的研究进展，包括新型PA纳滤膜、纳米材料/PA混合基质膜及超薄PA纳滤膜3个方面，探讨了选择分离层结构调控与纳滤膜渗透选择性能优化的关系，最后指出目前界面聚合制备高渗透选择性PA纳滤膜在规模化、稳定性及可控性存在的问题，并对未来界面聚合纳滤膜在微观结构和聚合过程调控方面的研究进行了展望。     

Removal of natural organic matter and THM formation potential by ultra- and nanofiltration of surface water

Natural organic matter (NOM) and trihalomethane formation potential (THMFP) removal were evaluated by ultrafiltration (UF) and nanofiltration (NF). Ten different raw water sources in Alicante province (SE Spain) were analysed. Five types of membranes of different materials were tested with a dead-end-type stirred UF cell. Additional measurements, such as dissolved organic carbon, ultraviolet absorbance (254nm), THMFP, ion concentration, pH, conductivity, etc. were made on raw water, permeates and concentrates. The SUVA value was used to determine the hydrophobicity of the water analysed. The elimination of NOM and THMFP is correlated with the molecular weight (MW) of NOM determined by size exclusion chromatography (SEC). The flux decline trends were correlated with cation concentration. NOM removal by UF is low, which correlates with the average MW determined by SEC with an average value of 922g/mol (between 833 and 1031g/mol). However, the NOM removal obtained with the NF90 and NF270 NF membranes for all water sources is almost complete (90%). THMFP removal is related to hydrophobicity and permeability of membrane. The NFT50 membrane removes almost 100% of the THMFP of more hydrophobic waters.     

纳滤膜去除水中微量酚类雌激素的试验研究

采用BDXN-90芳香聚酰胺复合纳滤膜处理水中的微量酚类雌激素,考察了操作压力、原水污染物浓度、离子强度和pH值等因素对截留效果的影响.结果表明,纳滤技术是去除水中微量酚类雌激素的有效方法,纳滤膜对4种不同酚类雌激素的截留率均大于90%;在不调节原水pH值及离子强度的条件下,截留率由高到低依次为五氯酚、4-壬基酚、双酚A、2,4-二氯苯酚;影响膜过滤性能的主要因素是操作压力、离子强度和pH值,原水中酚类雌激素浓度对膜过滤性能的影响不大;膜过滤的最佳条件为：操作压力为0.4 MPa,pH值为11,电导率为0 mS/cm.     

Vapor-phase polymerization of high-performance thin-film composite membranes for nanofiltration

Thin-film composite (TFC) membranes are commendable semipermeable barriers for water treatment. Although conventionally immiscible interfaces between aqueous and organic solutions are widely utilized for obtaining TFC membranes, interfacial polymerization still suffers from the issues of harmful solvents, complex diffusion/reaction of the reactants, and thermodynamic and kinetic instability of interfaces. In this study, vapor-phase polymerization with no requirements for organic solvent and immiscible interface is utilized for processing TFC nanofiltration membranes. Through cross-linking of β-cyclodextrin and piperazine layers by trimesoyl chloride vapor, polyester and polyamide TFC membranes with high cross-linking degree are simply prepared in a scalable and reproducible manner. The prepared TFC membranes exhibit stable nanofiltration and desalination performance for all water, organic solvent, and water–organic mixture systems, with permeance up to an order of magnitude higher than that of commercial membranes.     

Atom transfer radical polymerization (ATRP): A versatile and forceful tool for functional membranes

The progress in atom transfer radical polymerization (ATRP) provides an effective means for the design and preparation of functional membranes. Polymeric membranes with different macromolecular architectures applied in fuel cells, including block and graft copolymers are conveniently prepared via ATRP. Moreover, ATRP has also been widely used to introduce functionality onto the membrane surface to enhance its use in specific applications, such as antifouling, stimuli-responsive, adsorption function and pervaporation. In this review, the recent design and synthesis of advanced functional membranes via the ATRP technique are discussed in detail and their especial advantages are highlighted by selected examples extract the principles for preparation or modification of membranes using the ATRP methodology.