Understanding and Modeling the Effect of Surfactants in Enhanced Particle Removal from Surfaces in Aqueous Media

The removal of particulate contamination is a critical issue for many manufacturing processes. It is particularly critical to the electronics industry in which small pieces of microscopic debris remaining after chemical mechanical planarization (cmp) using submicron polishing particles can cause device failure. One way to enhance particle removal following the cmp process is to utilize surfactants. Recent research has shown ways to model the effect of surfactants on enhanced particle removal. However, previous research has not demonstrated the effect of ionic strength on enhanced particle removal associated with surfactant use. Past research has also not shown the combined effects of ionic strength and surfactant concentration on enhanced particle removal using surfactants. This article summarizes the parameters affecting particle removal, and it provides data and analysis on the effect of ionic strength as well as the combined effects of ionic strength and surfactant concentration on particle removal following cmp processing.     

Prediction of Final Product Properties After Cocurrent Spray Drying

The effect of drying and atomization conditions on the physical properties of powders for agglomerate-like materials and skin-forming material are studied in this article. A neural model is used for powder bulk and tapped density predictions.     

Effect of particle size on the surface oxidation and flotation behavior of galena particles in lime system

ABSTRACT

In this research, the effect of particle size on the surface oxidation and flotation behavior of galena in the lime system was studied. Coarse (?0.074 + 0.038 mm), intermediate (?0.038 + 0.025 mm) and fine (?0.025 mm) galena particles were used in the experiment. The dissolution tests, flotation tests, and sorption tests were accomplished. Through further analysis by XPS, the effect of particle size and lime was observed. The decrease of mineral particle sizes increased the adsorption ratio of collector and the dissolution of galena, while the hydrophilic product OH^?/Ca(OH)⁺ produced by dissolution occupied the dominant position, which led to the minerals hydrophilic.     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

超细Al（OH）3的粒度控制研究

采用铝酸钠种子分解法制备超细Al（OH）3.用X射线衍射仪（XRD）表征了样品的晶相组成,用扫描电子显微镜（SEM）观察了样品的形貌,用激光粒度分析仪测定样品的粒度分布.研究了NaOH浓度、NaOH/Al（OH）3摩尔比,分解温度,分解时间、晶种率和搅拌速率等因素对Al（OH）3的粒度的影响.结果表明：NaOH浓度越高,分解温度越低,NaOH/Al（OH）3摩尔比越小,得到的Al（OH）3颗粒的粒度越小.试验条件为：NaOH浓度180 g/L,NaOH/Al（OH）3摩尔比1.15,分解温度40℃,分解时间26 h,晶种率8％,搅拌速率200 rpm时,氢氧化铝颗粒的平均粒度为2.89 μm.     

Cryo-EM image alignment based on nonuniform fast Fourier transform

In single particle analysis, two-dimensional (2-D) alignment is a fundamental step intended to put into register various particle projections of biological macromolecules collected at the electron microscope. The efficiency and quality of three-dimensional (3-D) structure reconstruction largely depends on the computational speed and alignment accuracy of this crucial step. In order to improve the performance of alignment, we introduce a new method that takes advantage of the highly accurate interpolation scheme based on the gridding method, a version of the nonuniform fast Fourier transform, and utilizes a multi-dimensional optimization algorithm for the refinement of the orientation parameters. Using simulated data, we demonstrate that by using less than half of the sample points and taking twice the runtime, our new 2-D alignment method achieves dramatically better alignment accuracy than that based on quadratic interpolation. We also apply our method to image to volume registration, the key step in the single particle EM structure refinement protocol. We find that in this case the accuracy of the method not only surpasses the accuracy of the commonly used real-space implementation, but results are achieved in much shorter time, making gridding-based alignment a perfect candidate for efficient structure determination in single particle analysis.     

Discrete particle swarm optimization based on estimation of distribution for terminal assignment problems

Terminal assignment problem (TEAP) is to determine minimum cost links to form a network by connecting a given set of terminals to a given collection of concentrators. This paper presents a novel discrete particle swarm optimization (PSO) based on estimation of distribution (EDA), named DPSO-EDA, for TEAP. EDAs sample new solutions from a probability model which characterizes the distribution of promising solutions in the search space at each generation. The DPSO-EDA incorporates the global statistical information collected from personal best solutions of all particles into the PSO, and therefore each particle has comprehensive learning and search ability. In the DPSO-EDA, a modified constraint handling method based on Hopfield neural network (HNN) is also introduced to fit nicely into the framework of the PSO and thus utilize the merit of the PSO. The DPSO-EDA adopts the asynchronous updating scheme. Further, the DPSO-EDA is applied to a problem directly related to TEAP, the task assignment problem (TAAP), in order to show that the DPSO-EDA can be generalized to other related combinatorial optimization problems. Simulation results on several problem instances show that the DPSO-EDA is better than previous methods.     

CCD传感器测试钢丝直径

介绍ＣＣＤ（ｃｈａｒｇｅｃｏｕｐｌｅｄｄｅｖｉｃｅｓ）传感器与激光光源、成象系统、二值化电路、电子计算机等组成的钢丝直径测试装置的工作原理、光学系统自动选择和检测电路系统及其优越的工作性能、广阔的应用前景。     

宇宙主胁量限定粒子质量、微观临界尺寸和真空光速（胁量力学初导IV）

扩展到任意质量体的宇宙主胁量描述。宇宙主胁量同质量之间只差一个常量系数。宇宙主胁量创造了粒子的质量，造就了粒子的微观临界尺寸，构筑了恒定而有限的真空光速。     

When viewing variations in paintings by Mondrian, aesthetic preferences correlate with pupil size.

Observers consciously prefer Mondrian's paintings in their original orientation compared with a rotated position—the “oblique effect” (Latto, Brain, & Kelly, 2000). However, this finding's premise, that all vertical–horizontal orientations of the thick black lines in Mondrian's oeuvre are preferred, overlooks the fact that the overall balance of these images is also altered when they are reoriented. Thus, balance may regulate the oblique effect, which might influence conscious aesthetic preferences. To address this issue, we explore Hess's (1965, 1972) claim that observers will unconsciously increase their pupil diameter to pleasing images and constrict it to unpleasant images. We overcame Hess's methodological limitation of not keeping his images' luminances and contrast constant across conditions by presenting eight Mondrian paintings (1921–1944) to 30 observers on a CRT for 20 s each in either their original or seven rotated positions. Simultaneously, we measured their pupil size while asking them to report how (dis)pleasing they found each image. We found both evidence for the oblique effect (where image rotation hampers preference) and a correlation between this consciously reported aesthetic preference and unconsciously derived pupil size. (PsycINFO Database Record (c) 2010 APA, all rights reserved)