基准平面垂直断面法在爆破漏斗试验中的应用

系统阐述了基准平面垂直断面法在爆破漏斗试验中测量爆破漏斗体积的基本原理,并将隧道激光断面仪应用于金厂河矿1 750 m水平15^#采场底部切割巷道爆破漏斗试验爆破漏斗体积测量中。通过与传统体重法等计算法所得漏斗体积分析比较,结果表明基于隧道激光断面仪与3D Mine软件分析的基准平面垂直断面法实用性强、操作方便、结果直观可靠,达到试验预期目的。     

基于BIM超高层密集布筋区埋入式型钢混凝土柱脚施工技术

以漳州市某超高层项目为例,针对超高层密集布筋区埋入式型钢柱脚与钢筋的深化设计、地脚螺栓的定位预埋、型钢柱脚支撑体系设计、节点钢筋穿插连接施工、埋入式型钢柱脚安装等方面,提出切实可行的施工方法,解决了埋入式型钢混凝土柱脚的地脚螺栓精准预埋、与底板密集钢筋穿插连接施工、悬空支撑稳定等一系列施工技术难题,既满足了设计方案的要求,又可为类似工程提供借鉴。     

Experimental study on free and submerged multi-jets

The flow characteristics of the hydraulic jump due to parallel jets are different from the classical jump emerging from a single gate. Due to the highly complex flow field at the downstream pool, deciding about the tailwater measuring location is a challenging issue affecting the flow measuring accuracy. Experiments are conducted herein, on different parallel jets’ configurations for both free and submerged flow conditions. To quantify the flow uniformity, for any downstream cross section, the associated momentum correction factors, β₂, were estimated for the free-flow condition. It is found that β₂-values depend significantly on the measuring location, and consequently the available conjugated depths relationship results in poor estimation when measuring location moves downstream. Employing Buckingham analysis, a general formula is proposed to calculate the momentum correction factors associated with the free hydraulic jump at different downstream measuring locations. The experimental results of this study indicated that such a formula enhances distinguishing between free and submerged flow conditions of the gates installed in parallel. Finally, a dimensionless stage-discharge formula is presented to predict the submerged flow rate through parallel gates of different gate openings and widths.     

梳棉机不同材质的活动盖板使用性能分析

通过对梳棉机活动盖板结构和在梳理区运转时的运行状态分析,阐述了活动盖板踵趾面磨损原因,提出了踵趾面的测试方法;并针对目前使用的铸铁盖板和铝合金盖板进行对比试验。结果表明:铝合金盖板具有成纱质量较好、耐磨性好和重量轻等优点,能降低梳棉机的消耗,延长活动盖板使用周期。     

Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

圆形截面柱的振动台试验及分析

进行了圆柱振动台试验,对模型的加速度反应数据进行获取。试验表明,随着地震的加速度峰值的不断增加,圆柱顶部加速度极值不断增加。柱顶的加速度响应有着增大的趋势,且极值比输入的加速度的极值有一定的放大。     

高低孔爆破处理高陡边坡的技术分析

针对前期规划不当,大宝山露天矿877 m平台高陡边坡局部存在难以采用预裂爆破技术进行处理的情况,决定采用高低孔爆破处理技术。为了解决这一难题,首先分析了高低孔的相对内涵,并对高低孔孔深计算公式进行了简单推导,然后通过公式计算得到了高低孔的孔深。在施工阶段,为了确保低孔的实施效果,两排低孔分区域使用同段别毫秒延时雷管,晚于高孔起爆。实践表明,处理后的平台平整度良好,坡面较为稳定,对高陡边坡采用高低孔爆破处理具有可行性,效果较好,可为类似边坡处理提供新思路。     

A new cladding technology to bond aluminium on magnesium

ABSTRACT

An in situ hot press bonding technology has been developed to clad aluminium on magnesium. Followed by regular hot rolling, magnesium sheets, covered by ductile and corrosion-resistant aluminium without detectable oxides in the interface, are produced. The new technology requires no welding, vacuum, protective atmosphere or barrier layer, and it makes good interfacial strength and rollability. Aluminium–magnesium intermetallic phases are formed along the clad–core interface at elevated temperatures. They are not detrimental under compression but may cause clad-core delamination in tensile strain. However, the tensile failure is more dependent on the formability of magnesium core than on the strength of interface.     

生活用纸项目五种节能技术的应用及经济分析

目前国内生活用纸行业竞争激烈,在保证产品质量的前提下,节能降耗、降低吨纸成本是每个纸厂的目标。本文通过对近年国内建成的部分生活用纸项目进行研究,从前期设计规划,到建成后跟踪比较,着重介绍偏心转子碎浆机与同心转子碎浆机、靴式压榨与真空压榨、透平风机与水环式真空泵、天然气热风汽罩使用再沸器及备浆流送短流程工艺的节能对比及运行成本分析,旨在为今后其他新项目降低吨纸能耗提供借鉴和参考。