Ф16mm、Ф18mm钼棒的研制

采用等静压制法，压制钼圆棒坯，经中频高温烧结，制得尺寸适合、用户满意的钼电极棒。     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

粉末布法制备SiC/Ti基复合材料

用粉末布法制备了低成本SiC/Ti基复合材料.结果表明,采用合适的轧制参数即可容易地获得厚度合适、均匀的粉末布;热失重分析和热解残余物分析指出用来制备粉末布的有机粘结剂的去除过程分成两个阶段,合理除气后,基本没有残余物.使用真空热压工艺制备的SiC/Ti基复合材料,纤维分布基本均匀,纤维与基体的界面结合良好.     

Intelligent Control of Consolidation and Solidification Processes

Intelligent processing of materials (IPM) deals with the integration of process models and in situ sensors into an intelligent process controller to achieve desired material properties. IPM-based control systems recently have been developed for both consolidation and solidification processes. This article explores the application of models based on the finite- element method (FEM) to develop process actuation systems, to design process schedules and component shape, and to develop a control model with which to control the process. The results in this article were presented at the AeroMat ’93 Advanced Aerospace Materials/Processes Conference and Exposition, Anaheim, CA, 7–10 June 1993     

热压烧结Ti3AlC2材料的制备、结构与性能研究

采用热压工艺研究了不同工艺制度和原料中不同的Si含量对Ti3AlC2合成的影响.研究表明在1 300℃～1 500℃,30MPa压力和Ar气氛中热压摩尔比为n(TiC)n(Ti)n(Al)n(Si)=2110.2的混合粉末,可以得到纯度达98%(质量分数)以上的致密块体Ti3AlC2材料;添加的Si均匀分布在基体中,形成固溶体,当添加Si的摩尔比为0.2时,固溶体的化学式为Ti2 76Al0 78Si0.22C2.烧结试样的晶体为层片状结构,1 300℃和1 400℃时,烧结试样的晶粒尺寸分别为10μm～15μm和20μm～30μm.材料的维氏硬度为3.3 GPa～5.0 GPa,弹性模量为289 GPa,抗压强度为785 MPa,抗弯强度为375 MPa,断裂韧性为7.0 MPa·m1/2;25℃时,电导率为3.1×106 S·m-1,热容为125.4 J/mol·K,热导率为27.5 W/m·K;热膨胀系数为8.8×10-6 K-1.     

纯铝等径角挤技术（I）——显微组织演化

研究了纯铝在 3种 (A、B和C)不同等径角挤工艺中的显微组织演化。结果表明 :纯铝经过等径角挤压变形后 ,其显微组织特征与加工路线有很大的关系。提出了立方元素扭转模型 ,分析了 3种不同加工路线的剪切面和剪切方向 ,较好地解释了采用 3种不同路线挤压后材料显微组织的演化规律。在路线C(各道次挤压间试样旋转 180°)中 ,每次挤压样品总是在相同的剪切面上发生剪切 ,每相邻道次之间的剪切方向相反 ,前一次变形产生的剪切应变被随后紧接着的下一次挤压所抵消 ,这导致了多余的剪切应变 ;在路线A(各道次挤压间试样不旋转 )中 ,有两个相交成 6 0°的剪切面 ,剪切交替地在两个剪切面上进行 ;在路线B(各道次挤压间试样旋转 90°)中 ,存在 4个不同的剪切面和剪切方向 ,挤压交替地在 4个剪切面上进行 ,X ,Y和Z平面上的晶粒都发生了剪切 ,这有利于等轴晶结构的形成     

Properties of Co-doped N-type FeSi2 processed by mechanical alloying

Iron-silicide was produced with a mechanical alloying process and consolidated through vacuum hot pressing. The as-milled powders were of metastable state and fully transformed into the ß-FeSi₂ phase through subsequent isothermal annealing. The as-consolidated iron silicides consisted of an untransformed mixture of α-Fe₂Si₅ and ?-FeSi phases and a partially transformed β-FeSi₂ phase was found in the low density compact. Isothermal annealing was carried out to induce transformation into a thermoelectric semiconducting β-FeSi₂ phase. The transformation behavior of the β-FeSi₂ was investigated utilizing DTA, SEM, and XRD analyses. Isothermal annealing at 830°C in vacuum led to a thermoelectric semiconducting β-FeSi₂ phase transformation, but some residual metallic α and ?-phases were unavoidable even after 96 hours of annealing. The iron silicide microstructures were investigated using SEM and TEM. The mechanical and thermoelectric properties of the β-FeSi₂ materials before and after isothermal annealing are characterized in this study.     

Monte-carlo modeling of grain growth in Zr equal channel angular pressed and recrystallized

Grain boundary character distribution in equal-channel-angular pressed Zr was studied. Using a die design of 90°/20° and an operation temperature of 350°C. The initial grain size of 20 μm was reduced to about 270 nm with 4 passes via route B_c. The grain growth kinetics of the recrystallized state was obtained by experiment and Monte-Carlo computer simulation, respectively, which showed good agreement. Based on kinetics and morphological characteristics, it was concluded that the grain coarsening mechanism was governed by normal grain growth. No sign of abnormal grain growth was detected either in the experiment or in simulation despite taking into consideration anisotropy in grain boundary energy as well as its mobility. This indicates that grain boundaries produced by severely deformed Zr are stable against explosive coarsening. The evolution characteristics of the microstructure in the present ECA pressed and recrystallized Zr differed from those of cold rolled Ti in that the grain boundary misorientation distribution and texture were rather stable during grain growth. Jointly Appointed by the Center for Advanced Aerospace Materials This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

Effects of annealing at high pressure on structure and mechanical properties of Al87Ni7Gd6 metallic glass

The effects of annealing and annealing with a superimposed pressure of 940 MPa on the primary crystallization behaviour of α-Al and the resulting micro-hardness have been studied for as-quenched Al₈₇Ni₇Gd₆ metallic glass. Isothermal annealing experiments were conducted for 30 min at 188 °C, 191 °C, and 205 °C in silicone oil maintained either at atmospheric pressure (i.e. 0.1 MPa) or at 940 MPa. XRD analyses detected the evolution of structure with annealing at 0.1 MPa, while specimens annealed with 940 MPa pressure exhibited sharper diffraction peaks than those annealed at 0.1 MPa. DSC measurements were conducted on the as-received amorphous ribbons as well as ribbons annealed at different temperatures at either 0.1. MPa or with 940 MPa superimposed pressure. Specimens annealed with 940 MPa pressure exhibited higher onset temperatures (i.e. T_x1) and temperatures for the first exothermic peak (i.e. T_p1) for primary crystallization. TEM measurements revealed an increase in the volume fraction of α-Al with increases in annealing temperature, while micro-hardness measurements revealed an increase in hardness with increasing amounts of α-Al. Specimens annealed with 940 MPa pressure exhibited further increases in both the volume fraction of α-Al and resulting micro-hardness.     

成形压力对氧化铝瓷球性能的影响

本文以不同的压力等静压成形瓷球，研究了成形压力对瓷球烧结温度、密度及耐磨性的影响。结果表明：在本研究系统内随着压力的增加瓷球的烧结温度下降，烧成温度范围拓宽。采用150MPa成形的瓷球密度最大且耐磨性最好。