纳米纤维素的疏水改性及应用研究进展

纳米纤维素作为一种性能优越的可再生纳米材料，应用前景极为广阔。然而，由于纳米纤维素结构上富含羟基，使其具有极强的亲水性，严重影响了纳米纤维素的疏水性能，并且在一定程度上限制了其在复合材料领域的应用。综述了纳米纤维素疏水改性的研究进展，从物理吸附、表面化学修饰（甲硅烷化、烷酰化、酯化等）、聚合物接枝共聚3个方面简述了目前应用较为广泛的疏水化改性方法，并对疏水纳米纤维素在包装材料、造纸、水净化等方面的应用现状进行了总结。最后对疏水改性纳米纤维素的未来发展进行了展望，旨在为疏水纳米纤维素的研究和应用提供参考。     

Investigating the wicking behavior of micro/nanofibrous core-sheath PET–PAN yarn modified by dimethyl 5-sodium sulfoisophthalate

The present research aims at imparting an improved wicking ability to the recycled multifilament yarns by wrapping composite nanofibers to attain an efficient material for filtration purposes. Therefore, polyacrylonitrile nanofibers containing dimethyl 5-sodium sulfoisophthalate nanoparticles were wrapped around the recycled poly(ethylene terephthalate) yarn by means of a novel electrospinning technique. Several tests were performed to investigate the parameters affecting wicking rise and moisture regain of the samples. Taguchi method was used in two separate designs (with or without nanoparticles). Some factors such as polymer solution concentration, mass ratio of nanoparticles, take-up rate, and number of filaments were considered as the variable factors while yarn wicking rate and moisture regain were the response factors. It was found that the hydrophilic nature of nanoparticles together with the ultrafine structure of nanofibers provide yarns with enhanced wicking properties. Although solution concentration is the predominant factor in wicking rate of the yarns containing nanoparticles, the most effective factor in wicking rise and moisture regain for other cases is the number of filaments. The mechanism of nanoparticle effect on fluidic jet during electrospinning process is explained by theory of nanofluids stability which has never been validated experimentally in previous research studies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48185.     

The effect of atmospheric plasma treatment of recycled carbon fiber at different plasma powers on recycled carbon fiber and its polypropylene composites

To increase the mechanical properties of recycled carbon fiber-reinforced polypropylene (PP) composites, recycled carbon fibers (RCF) were subjected to atmospheric plasma treatment at different plasma powers (100, 200, and 300 W). The changes on surface topography and roughness of RCF were examined by atomic force microscopy. Plasma treatment of RCF increased the roughness value of RCF. The variation of surface elemental compositions and tensile strength of RCF were determined by using X-ray photoelectron spectroscopy and tensile test, respectively. Plasma-treated RCF-reinforced PP composites were fabricated using high speed thermo-kinetic mixer. Plasma treatment of RCF at 100 W increased the tensile and flexural strength values of RCF-reinforced PP composites considerably by 17 and 11%, respectively. However, plasma treatment of RCF at higher plasma powers (200 W and 300 W) decreased tensile and flexural strength values of composites because of the etching of RCF. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47131.     

造纸固废处理专利技术分析

2008年至2018年专利数量基本呈线性增长。利用IPC分类号和关键词在中文专利数据库中进行检索,对我国造纸固废处理技术的申请量、主要申请区域、主要申请人、技术分布等情况进行分析。研究热点和重点为焚烧发电、生产纤维板、作为燃料回收利用等。     

Mechanical and microstructural analysis of geopolymer composites based on metakaolin and recycled silica

This paper evaluated mechanical and thermal stability of alkali-activated materials obtained from metakaolin and alternative silica sources, such as rice husk ash (RHA) and silica fume (SF), and were reinforced with recycled ceramic particles (RP) obtained by grinding bricks. Specimens were produced, and after 7 days of curing, they were exposed to temperatures between 300 and 1200°C to determine the influence that different percentages of RP had on the mechanical behavior and microstructure of the produced composites. The results showed a reduction in the linear contraction by 10.22% with 20 wt% RP and that the reinforcing materials improved the mechanical performance of the geopolymers after exposure to high temperatures; the compressive strengths reached 137.7 (±11.4)  MPa after being exposed to 1200°C for the matrix based on RHA and 180.6 (±19.15) MPa after being reinforced with 20 wt% RP. The improvement was mainly due to densification and the formation of crystalline products such as leucite, kalsilite, and mullite.     

混菌矿化增强再生粗骨料的物理力学性能

为克服单一微生物培养成本高且矿化鲁棒性不足的缺陷，提出了一种混菌矿化增强再生粗骨料物理力学性能的方法.通过筛选矿化效率较高的好氧嗜碱混菌，考察了混菌矿化对再生粗骨料物理力学性能和混凝土抗压强度的影响.结果表明：相同增强时间下，混菌比纯菌呈现出更优异的矿化增强效果；随着混菌矿化增强时间的延长，再生粗骨料吸水率和压碎指标呈现出先减小后增大的趋势，最优增强时间为15 d；采用矿化增强再生粗骨料制备的再生混凝土抗压强度提高幅度达到22.1%.     

Extraction of protein from food waste: An overview of current status and opportunities

The chief intent of this review is to explain the different extraction techniques and efficiencies for the recovery of protein from food waste (FW) sources. Although FW is not a new concept, increasing concerns about chronic hunger, nutritional deficiency, food security, and sustainability have intensified attention on alternative and sustainable sources of protein for food and feed. Initiatives to extract and utilize protein from FW on a commercial scale have been undertaken, mainly in the developed countries, but they remain largely underutilized and generally suited for low-quality products. The current analysis reveals the extraction of protein from FW is a many-sided (complex) issue, and that identifies for a stronger and extensive integration of diverse extraction perspectives, focusing on nutritional quality, yield, and functionality of the isolated protein as a valued recycled ingredient.     

纳米纤维素替代部分造纸法烟草基片中木浆纤维的研究

为了改善烟草基片的性能,研究了在造纸法烟草基片的抄造中用纳米纤维素替代部分木浆纤维对烟草基片性能的影响,优选出效果最佳的纳米纤维素,并得到优化的工艺条件。结果表明,阳离子型纳米纤丝纤维素(NFC)能有效改善烟草基片的性能;添加0.1%(相对绝干烟草浆料)的阳离子型NFC,能使烟草基片中的木浆含量由25%降低至16.7%(降幅为33.2%),并保持烟草基片的抗张指数和松厚度等性能基本相同。阳离子型NFC的加入降低了烟草基片中木浆纤维的含量,进而有效提升卷烟的吸食口感。     

Effect of recycled content and rPET quality on the properties of PET bottles,part II: Migration

Polyethylene terephthalate (PET) bottles were produced from three types of recycled PET (rPET) with four levels of recycled content. The migration of substances from these bottles to water was studied. Several migrated substances were detected. The migrated amounts of acetaldehyde and ethylene glycol complied with the limits given in the food contact material (FCM) legislation. Migration of 2-methyl-1,3-dioxolane was below the limit of 10 μg·L⁻¹, which is conventionally applied for non-intentionally added substances (NIAS) not classified as ‘carcinogenic’, ‘mutagenic’ or ‘toxic to reproduction’ (CMR). Limonene, acetone, butanone and furan were also detected as migrants, of which limonene is a natural fragrant, and the other three are probably residues from solvents used to clean and protect the mould at the small-scale production facility. Finally, benzene and styrene were also found as migrants from rPET. These migrants appear to originate from heat-induced reactions within the PET matrix, which involve contaminants. The formation of benzene in rPET is attributed to polyvinylchloride as contaminant. The migrated amounts of benzene from the PET bottles with recycled content to the water simulant are relatively small (0.03–0.44 μg·L⁻¹) after 10 days at 40°C. Consequently, the margin of exposure is 3.10⁵–8.10⁶. Hence, the level of concern for the public health is low, and the migrated amount represents a low priority for risk management. The FCM legislation demands a risk assessment for migrating NIAS. Depending on the underlying data and exposure scenario, different threshold limits in the food can be derived which can still be considered as safe.     

锂电池回收再生石墨增强水泥性能研究

废弃锂离子电池的负极活性材料主要为石墨,现阶段对于废弃锂离子电池中的石墨主要采用填埋等方法进行处理,造成了资源的浪费和环境的污染。现有的研究表明,废弃锂离子电池中的石墨经高温热解及酸浸处理后可以得到纯净的再生石墨,采用再生石墨增强水泥基复合材料的力学性能和电学性能。结果表明：再生石墨的引入可以增强材料的抗压性能和抗折性能,最大增幅分别达到了57.3%和84.4%。此外,再生石墨的加入有效降低了材料的电阻率,减少了极化时间,当再生石墨的掺加量为3%时,养护28 d后材料的电阻率仅为249 Ω·cm。该复合材料还具有典型的压敏特性。所制备的复合材料有望用于混凝土材料结构的实时动态监测。此外,对于废弃锂离子电池的全组分回收利用及功能水泥材料的研发具有重要意义。