φ100mm定径机轧辊孔型设计改进

针对定径机换辊后定径钢管所出现的质量问题,提出了成品机架的轧辊孔型不分配变形量和适当增大孔型直径的改进措施。     

磷酸酯淀粉在纯棉细特高密织物浆纱中的应用

就磷酸酯淀粉在纯棉细号高密织物中的上浆情况进行了试验，提出了具体浆纱工艺和减少织造断头率，提高织物效率及布面质量对策，实验表明，磷酸酯淀粉完全适应于纯绵细特高密织物的上浆要求。     

Long-chain fatty ammonium quaternaries in papermaking

A series of long-chain quaternary ammonium halogen esters (UKK-chemicals), quaternary dimethyl tallow epoxypropyl ammonium halogens (EPK1), quaternary ditallow methyl epoxypropyl ammonium halogens (EPK2), and EPK2 oligomers (EPK2P) were synthesized. At acidic, neutral, or slightly basic conditions, EPK1-, EPK2-, EPK2P-, and UKK-chemicals operate as cationic chemicals. They can be used, for example, as stock sizings, surface sizings, or fixatives. Stock sizing, surface sizing, and fixative experiments indicate that EPK1-, EPK2-, EPK2P-, and UKK-chemicals function at least as well as or better than the corresponding synthetic chemicals used in papermaking.     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

Characterisation of inter-particle forces within agglomerated metallurgical powders

The strength of agglomerates of nickel flash furnace concentrate and dust was determined from experimental observations of agglomerates forming under controlled conditions, combined with mathematical equations from the literature. It was found that the agglomerates had a tensile strength ranging from 0.01 Pa to 38.7 Pa, while inter-particle forces ranged from 2.2 × 10^− 12 N to 1.5 × 10^− 10 N. These values were compared to the expected magnitude of van der Waals, electrostatic, magnetic and capillary forces within the agglomerates, and it was found that both electrostatic and van der Waals forces are likely to contribute to the cohesion of agglomerates, although sub-micron particles and the presence of sufficiently large asperities on the surface of particles limit the magnitude of van der Waals forces. Magnetic forces are large enough to contribute to the cohesion of dust agglomerates, which is in keeping with the high magnetite content of the recycle dust. It is postulated that electrostatic forces, acting over a longer range than van der Waals forces, may be responsible for initially bringing particles together. The methodology for determining inter-particle forces can be applied to the computer modelling of flash smelting systems, as well as other gas/particle systems such as fluidized beds.     

Optimal Control of Solar Sludge Dryers

Optimal control (OC) methodology is used to develop a control policy for a batch-operated solar sludge dryer with ventilation as the dominant control. Batch performance criteria and instantaneous optimization criteria are developed for two economic environments: quota limited and capital limited. The general formulation, as well as simplifications resulting from the multiplicative form of the evaporation (drying) rate model, are presented. The multiplicative form results in a single constant number, called here “control intensity,” which is used to guide the on-line control decisions. These decisions turn out to be independent of the dry solids content (DSC) of the sludge. Further simplification, by assuming a strictly constant weather, is used to demonstrate the general effects of the economic and physical (weather) environment on the solution.

The OC approach is used to address, via simulation under realistic weather conditions, several design, operation, and pricing problems. In particular, the following have been considered: sizing of the ventilation fans, determination of a fair fee for sludge disposal, finding the best final DSC, and evaluating the effect of the price of electricity. Regarding the particular location represented by the data, it has been shown that the installed capacity of the ventilation fans should be increased and that there seems to be sufficient economic incentive for solar drying.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

铝箔纸胶粘剂的制备

由醋酸乙烯和丙烯酸酯所制得的共聚物，能够极大地提高乳液对铝箔和纸张之间的粘合力，通过调整保护胶体聚乙烯醇的用量和增塑剂邻苯二甲酸二丁酯在反应过程中的不同加入方式，可以控制和生产所需要的乳液粘度，流平剂的加入，则改良了乳液在铝箔上胶时的流平性。     

聚酰亚胺复合杂化环氧树脂基增强浆料的制备与性能研究

采用溶胶-凝胶技术,在合成的聚酰胺酸(PAA)中对纳米SiO2/TiO2前驱体进行原位改性,添加硅烷偶联剂(WD-50),利用超声空化及复配技术制备了环氧树脂基-SiO2.TiO2复合杂化聚酰亚胺增强浆料,并采用FTIR、DSC、粒径分析仪、力学测试、STM等手段对所制备增强浆料的性能及其在碳纤维上浆膜铺展的显微形貌进行了分析.结果表明:SiO2.TiO2以纳米粒度分布于浆膜中;上浆后碳纤维轴向界面有一层纳米级粒状突起,表面较为粗糙,改善了碳纤维的界面性能,杂化浆料处理后碳纤维的抗拉强度及层间剪切强度显著提高.     

U形接触片多工位级进模设计与制造

针对U形接触片的技术要求,确定了合理的冲压工艺方案,阐述了该多工位级进模设计要点,产品质量达到设计要求。同时,还介绍了楔块装置及磷铜薄片整形的微调装置。