Environmentally Friendly Graphene Inks for Touch Screen Sensors

Graphene-based materials have attracted significant attention in many technological fields, but scaling up graphene-based technologies still faces substantial challenges. High-throughput top-down methods generally require hazardous, toxic, and high-boiling-point solvents. Here, an efficient and inexpensive strategy is proposed to produce graphene dispersions by liquid-phase exfoliation (LPE) through a combination of shear-mixing (SM) and tip sonication (TS) techniques, yielding highly concentrated graphene inks compatible with spray coating. The quality of graphene flakes (e.g., lateral size and thickness) and their concentration in the dispersions are compared using different spectroscopic and microscopy techniques. Several approaches (individual SM and TS, and their combination) are tested in three solvents (N-methyl-2-pyrrolidone, dimethylformamide, and cyrene). Interestingly, the combination of SM and TS in cyrene yields high-quality graphene dispersions, overcoming the environmental issues linked to the other two solvents. Starting from the cyrene dispersion, a graphene-based ink is prepared to spray-coat flexible electrodes and assemble a touch screen prototype. The electrodes feature a low sheet resistance (290 Ω □⁻¹) and high optical transmittance (78%), which provide the prototype with a high signal-to-noise ratio (14 dB) and multi-touch functionality (up to four simultaneous touches). These results illustrate a potential pathway toward the integration of LPE-graphene in commercial flexible electronics.     

The production of rGO/ RuO2 aerogel supercapacitor and analysis of its electrochemical performances

In this study, ruthenium was bonded to the reduced graphene oxide in an ultrasonic bath. The aerogel of the mixture was produced at −78 °C. Structural characterization of aerogels was done with XRD and FTIR, surface characterization was performed with STEM, and elemental analysis was conducted by EDX analysis. The produced aerogel composites were transformed into electrodes on conductive Nickel foam. IviumStat, a potentiostat/galvanostat device, was used for the electrochemical characterization of the symmetrical supercapacitors. According to CV voltammograms, rGO/RuO₂ aerogels' highest specific capacitance was calculated as 328.6 F g⁻¹ at a potential scan rate of 5 mV s⁻¹. The assembled rGO/RuO₂ aerogel-based supercapacitor cell offered a high energy density value of 31.1 W h kg⁻¹ even at the power density of 8.365 kW kg⁻¹; this is comparable to that of lead-acid and nickel-metal hybrid batteries.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Boosted 2D graphene nanosheets by organic-inorganic hybrid cross-linker for an efficient and stable supercapacitor

Using covalent graphene derivatives in energy storage applications is promising. From this view, covalently cross-linked graphene oxide (GO) nanosheets are designed using polyoligomeric silsesquioxanes-propyl-NH₂ (POPN). Then, by incorporating cobalt sulfide nanoparticles into the porous scaffold, a high-value nanocomposite is formed. In a typical three-electrode cell, this nanocomposite declared substantial specific capacity of 454 and 438 Fg^-1 using cyclic voltammetry (CV) and charge-discharge (GCD) assessments. The device is assembled via two identical electrodes containing RGO-SiO₃-NH2-poss-NH2-SiO₃-RGO/cobalt sulfide (RGO-Si-POPN-Si-RGO/CoS₂). Utilizing CV and GCD methods, specific capacitances of 328 and 315 Fg^-1 are realized at a sweep rate and current density of 2 mVs^?1 and 0.5 Ag^-1, respectively. The device presents desirable energy density of 18.5 Whkg^?1 at the power density of 325 Wkg^-1. More impressively, around 97.9% of the specific capacitance is retained after 5000 charge-discharge cycles. The results confirm exceptional capacitive capabilities and super stability of the nanocomposite suitable for practical systems.     

High performance asymmetric supercapacitor based on 3D microsphere-like 1T-MoS2 with high 1T phase content

1T phase molybdenum disulfide (1T-MoS₂) has aroused extensive concern in energy storage devices such as supercapacitors due to its large interlayer spacing, high conductivity and good hydrophilicity. However, it is struggle to synthesize 1T-MoS₂ with stable 1T phase with high content. Herein, Ammonium ion intercalation molybdenum disulfide (A-MoS₂) with high 1T content and stable 3D microsphere structure was successfully synthesized using a facile hydrothermal method. We explained the feasibility of ammonium ion (NH₄⁺) intercalation through density functional theory (DFT) calculations and proved the successful intercalation of NH₄⁺ by XRD and XPS. Through XPS fitting, the 1T phase content is calculated as high as 83.1%. The as-prepared A-MoS₂ presents a stable 3D microsphere structure with the interlayer spacing expanded to 0.93 nm, which provides a wide ion diffusion channel that allows ions to pass through quickly. Moreover, the high 1T content increases the hydrophilicity of MoS₂, thereby improving the wettability of the electrode, which contributes to the interaction between the electrolyte and electrode. In 1 M Na₂SO₄, A-MoS₂ electrode material displays high specific capacitance of 228 F g^?1 at 5 mV s^?1 and retains 127 F g^?1 at 80 mV s^?1, which proves the good rate capability. Furthermore, the assembled α-MnO₂//A-MoS₂ asymmetric supercapacitor (ASC) displayed a wide operating voltage of 2.1 V. The assembled ASC displays a high energy density of 35.8 Wh?kg^?1 at a power density of 525.0 W kg^?1, which indicates excellent energy storage performance.     

Evaluation of the localized corrosion on Mg electrode surface by electrochemical noise technique

The symmetrical and asymmetrical electrodes made of Mg were studied in 0.1-M NaCl electrolyte adjusted at pH 12. The statistical and wavelet methods were employed for analyzing the electrochemical current noise (ECN) signals. The asymmetric configuration was used for electrochemical detection of filiform corrosion on Mg electrode. The real time scale of the dominant transients of the asymmetric electrodes was detected on the basis of the maximum peak in the SDPS plots. The SDPS values of the real time scale crystals of the ECN signals resulting from asymmetrical electrodes increased with the increase in immersion time due to the onset of filiform corrosion.     

Single chamber Solid Oxide Fuel Cells selective electrodes: A real chance with brownmillerite-based nanocomposites

In this contribution brownmillerite-based nanocomposite cathode for Single-Chamber Solid Oxide Fuel Cells is developed. These cells can be very attractive especially for small and cheap devices because of the absence of seals. The efficiency of SC-SOFCs is strictly connected to the selectivity of anode and cathode, the bottleneck for this technology. The development of a cathode inert in fuel oxidation is particularly challenging. Our strategy is to start from a catalytically un-active support (CFA = Ca₂FeAl_0.95Mg_0.05O₅) and induce the formation of iron oxide based nanoparticles, expected to activate oxygen. Symmetric (CFA + FeO_x/CGO/CFA + FeO_x) and complete cells (CFA + FeO_x/CGO/Ni-CGO) are studied in air and methane/oxygen 2:1 mixture. The Area Specific Resistance of CFA + FeO_x is less than 1/3 that of CFA. The high selectivity allows to reach an efficiency of 25%; power still needs to be increased but we demonstrated the possibility to develop selective low cost electrodes. The effect of air, methane/oxygen exposure and the heat treatments were carefully investigated.     

A novel utilized method of tar derived from biomass gasification for fabricating binder-free all-solid-state hybrid supercapacitors

As an industrial pollutant, tar derived from biomass gasification is used as the precursor for fabricating a novel carbon-metal hydroxides composite electrode. A slurry (the mixture of tar, KOH and melamine) is daubed uniformly onto the nickel foam, which is directly carbonized to form NPC@LDH electrode material. This electrode is further coated with NiCo-LDH nanosheets using an electrodeposition method to form NF@NPC@LDH. The newly made NF@NPC@LDH electrode exhibits a high specific capacity of 9.6 F cm⁻² at a current density of 2 mA cm⁻² and good rate performance (55.3% retention). Furthermore, a hybrid NF@NPC@LDH//NF@PC all-solid-state supercapacitor is fabricated, and the device exhibits high energy density of 1.28 mWh cm⁻³ at a power density of 8.04 mW cm⁻³, low resistance and good cycling stability.     

Ni(OH)2与不同碳质材料复合制备超级电容器电极材料研究进展

超级电容器具有功率密度大、寿命长、生产成本低等优点,被认为是最有发展前途的储能系统之一。然而,超级电容器的低能量密度阻碍了其实际应用。由于存储的能量与CV2成正比,可以通过增加材料的电容"C"或操作电压窗口"V"或两者同时增加来提高超级电容器的能量密度。然而具有宽电位窗口的有机电解质离子往往电导率差,成本高,容易引起环境问题。因此为改善能量密度,应采用高比电容的电极材料,故而设计出具有高比电容的适合电极材料就成为研究热点。Ni(OH)2作为超级电容器电极材料,具有理论容量大、成本低、天然丰富、易于合成等优点,近年来备受关注。但由于Ni(OH)2导电率低、比表面积小,其容量劣化严重。碳质材料作为双电层超级电容器的电极材料,其能量存储机制取决于电极表面的电解质离子吸附和解离,具有导电率好、原料丰富、成本较低、电化学稳定性高等优点而应用广泛。因此,有必要将高导电碳质材料引入Ni(OH)2组成复合材料以提高电容性能。笔者综述了Ni(OH)2基材料的合成方法,特别是与碳质材料复合来提高Ni(OH)2基材料的循环稳定性和倍率性能方面的研究新进展。