Enzymatic Responses to Low-Intensity Radiation of Tritium

The present study considers a possible role of enzymatic reactions in the adaptive response of cells to the beta-emitting radionuclide tritium under conditions of low-dose exposures. Effects of tritiated water (HTO) on the reactions of bacterial luciferase and NAD(P)H:FMN-oxidoreductase, as well as a coupled system of these two reactions, were studied at radioactivity concentrations ≤ 200 MBq/L. Additionally, one of the simplest enzymatic reactions, photobiochemical proton transfer in Coelenteramide-containing Fluorescent Protein (CLM-FP), was also investigated. We found that HTO increased the activity of NAD(P)H:FMN-oxidoreductase at the initial stage of its reaction (by up to 230%); however, a rise of luciferase activity was moderate (<20%). The CLM-FP samples did not show any increase in the rate of the photobiochemical proton transfer under the exposure to HTO. The responses of the enzyme systems were compared to the ‘hormetic’ response of luminous marine bacterial cells studied earlier. We conclude that (1) the oxidoreductase reaction contributes significantly to the activation of the coupled enzyme system and bacterial cells by tritium, and (2) an increase in the organization level of biological systems promotes the hormesis phenomenon.     

Preparation of Exfoliated Graphite Modified with Magnesium Ferrite

A magnetic sorbent based on exfoliated graphite modified with magnesium ferrite has been prepared by impregnating oxidized graphite in a mixed solution of FeCl₃ and Mg(NO₃)₂, followed by heat treatment of the impregnated oxidized graphite in air. X-ray diffraction and Mössbauer spectroscopy results demonstrate that the structure of the magnesium ferrite is an inverse spinel with a degree of inversion of 0.59. The saturation magnetization of the magnesium ferrite-containing exfoliated graphite is 16.1 emu/g, whereas its oil sorption capacity is as high as 54 g/g. Compaction of the exfoliated graphite to a density of 0.03 g/cm³ reduced its sorption capacity to 26 g/g. Further increasing the density of the material led to a considerable decrease in its sorption capacity.     

Influence of Macromolecular Brushes with Polyimide Backbones and Poly(methyl methacrylate) Side Chains on Structure,Physical, and Transport Properties of Polyphthalamide

Composite films based on polyamide (poly(m-phenylene-iso-phthalamide)) (PA) and a brush-like polymer with polyimide (PI) backbone and side poly(methyl methacrylate) chains (PI-PMMA) were prepared by mixing individual solutions of PA and PI-PMMA and subsequent film casting. Macromolecular brushes with the same backbone length and density of side chains but with various lengths of side PMMA chains were synthesized via activator generated by electron transfer atom transfer radical polymerization. Interactions between PA and PI-PMMA, as well as distribution of PI-PMMA filler inside the PA matrix, were studied by viscometry, dynamic light scattering, differential scanning calorimetry, scanning electron microscopy, and IR spectroscopy. The mechanical properties of polymer samples were also investigated. Microphase separation was revealed in PA/PI-PMMA films. The length of side chains influences interactions between PA and PI-PMMA. At the same time, the degree of reduction in the rigidity parameters and in the elasticity parameter depends on the side chain length. Diffusion membranes were prepared on the basis of compositions with the best mechanical properties; these membranes proved to be highly efficient in pervaporation of methanol–hexane mixture. It was established that the fluxes and separation factors of the studied membranes are several times higher as compared to the corresponding characteristics of known commercial membranes. POLYM. ENG. SCI., 60:481–490, 2020. © 2019 Society of Plastics Engineers     

Two-Stage Ozonation – Adsorption Purification of Ground Water from Trichloroethylene and Tetrachloroethylene with Application of Commercial Carbon Adsorbents

ABSTRACT

The aim of the research is to choose the most efficient adsorbent for two-stage ozone-sorption purification of groundwater containing both trichloroethylene (TCE) and tetrachloroethylene (PCE) between three carbon sorbents produced in Russia (AUT-M, CAUSORB-221, and AG-3). Sorption isotherms of TCE and PCE on AUT-M and CAUSORB-221 at 296 K were fitted by the Freundlich equation. The better TCE and PCE sorption ability of AUT-M in comparison with CAUSORB – 221 and AG-3 was demonstrated.

The optimum parameters for ozonation and sorption stages of groundwater purification from TCE and PCE are elucidated using laboratory and pilot-plant scales. Prolonged test of this technology for purification of ground demonstrated that the higher achievable efficiency of destruction with ozone is 94% for TCE and 38% for PCE. Ozonation-sorption treatment of groundwater allows one to achieve TCE and PCE removal efficiency of 96-97% and 92-94% correspondingly. The most efficient carbon sorbent is microporous carbon fiber AUT-M. Using this sorbent, TCE and PCE concentrations in treated water decrease below the MPC level (5 μg/L) adopted in Russia. It is concluded that the combination of ozonation with sorption of residual contaminants by carbon sorbents is a promising way for the purification of waters containing chlorinated contaminants.     

Structural properties of nanocomposites based on resole-type phenol-formaldehyde oligomers and detonation nanodiamonds

Using the methods of infrared spectroscopy (IRS) and X-ray photoelectron spectroscopy (XPS), it was shown that short-term high-energy machining of detonation nanodiamonds (DND) leads to structural changes in the crystal structure and functional composition of the surface layer on particles. The possibility of spontaneous formation for stable colloidal systems with a narrow size distribution of mechanically activated DND in phenol-formaldehyde oligomers (PFO) was established. By molecular spectroscopy it was revealed that π → π* interactions of the aromatic rings of PFO are caused by orientational phenomena as a result of hydrogen bonds between an activated DND surface and functional groups of PFO. The effect of DND concentration on the curing reaction parameters ofpsgr the phenol-formaldehyde oligomer was determined by differential scanning calorimetry (DSC). The concentration effect of mechanically activated nanodiamonds on the physical and mechanical characteristics of a composite material based on phenol-formaldehyde binder and polyamide paper (Nomex) was studied. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48582.     

C60 and C60-arginine aqueous solutions: In vitro toxicity and structural study

Abstract

Small-angle X-ray and neutron scattering was applied for the structural characterization of aggregates in water dispersions of fullerene C₆₀ prepared by dialysis method and its conjugate with amino acid arginine. Two compounds are also compared with respect to their toxic properties. Experiments on the cytotoxicity of these systems on the A549, HepG2 and HeLa cells showed no toxic effects of the dispersions.     

Interpolyelectrolyte complexes of maleic acid copolymers and chitosan for stabilization and functionalization of magnetite nano‐ and microparticles

A facile method of preparation of stabilized and functionalized nano‐ and microparticles of magnetite by successive application of oppositely charged polymers with a regular structure of macromolecular chains (chitosan and maleic acid copolymers) onto Fe₃O₄ core are developed. This approach makes it possible to create two types of magnetite interpolyelectrolyte shells, containing carboxylic or amino groups in outer layer of shell. Composition and magnetic properties of composite particles depend on nature of the copolymer of maleic acid, reaction conditions and size of obtained particles. The carboxylic groups of copolymer in outer layer of interpolyelectrolyte shell were converted into reactive anhydride groups by heating. Thermal treatment also leads to covalent crosslinking of shell and improves stability of composites both in acidic and alkaline media. Horseradish peroxidase was successfully immobilized onto covalently crosslinked and activated microparticles of Fe₃O₄ in aqueous medium without of condensing agents. The proposed reproducible and low‐cost technique does not use toxic reagents or solvents at all stages, including preparation of Fe₃O₄, formation, activation and crosslinking, of magnetite shell, modification of activated surface of composite particles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39663.     

Structural studies of a ferromagnetic GaMnSb layer

The crystalline structure and composition of a GaMnSb film is studied. The film is produced on a GaAs (100) substrate by deposition from laser plasma in a hydrogen flux at a temperature of 400°C. The formation of GaMn inclusions in the GaSb:Mn matrix is detected. The stoichiometry ratio of the inclusions corresponds to that of the Ga_162.5Mn_101.5 compound.     

Simplified scoring methods for HMM-based speech recognition

Most of the contemporary speech recognition systems exploit complex algorithms based on Hidden Markov Models (HMMs) to achieve high accuracy. However, in some cases rich computational resources are not available, and even isolated words recognition becomes challenging task. In this paper, we present two ways to simplify scoring in HMM-based speech recognition in order to reduce its computational complexity. We focus on core HMM procedure—forward algorithm, which is used to find the probability of generating observation sequence by given HMM, applying methods of dynamic programming. All proposed approaches were tested on Russian words recognition and the results were compared with those demonstrated by conventional forward algorithm.