一种磁控管用扼流线圈仿真设计

采用电路仿真软件仿真滤波组件S参数曲线,观察曲线随器件参数的变化;介绍利用三维全波电磁仿真软件HFSS简化设计流程的方法,并与测试结果对比。结果表明:利用3D仿真软件在满足器件设计精度的同时可以简化线圈的设计流程。     

Moment quantization of inhomogeneous spin ensembles

Robust excitation of a large spin ensemble is a long-standing problem in the field of quantum information science and engineering and presents a grand challenge in quantum control. A formal theoretical treatment of this task is to formulate it as an ensemble control problem defined on an infinite-dimensional space. In this paper, we present a distinct perspective to understand and control quantum ensemble systems. Instead of directly analyzing spin ensemble systems defined on a Hilbert space, we transform them to a space where the systems have reduced dimensions with distinctive network structures through the introduction of moment representations. In particular, we illustrate the idea of moment quantization for a spin ensemble and illuminate how this technique leads to a dynamically equivalent control system of moments. This equivalence enables the control of spin ensembles through the control of their moment systems, which in turn creates a new control analysis and design paradigm for quantum ensemble systems based on the use of truncated moment systems.     

A Fusion Kalman Filter and UFIR Estimator Using the Influence Function Method

In this paper, the Kalman filter (KF) and the unbiased finite impulse response (UFIR) filter are fused in the discrete-time state-space to improve robustness against uncertainties. To avoid the problem where fusion filters may give up some advantages of UFIR filters by fusing based on noise statistics, we attempt to find a way to fuse without using noise statistics. The fusion filtering algorithm is derived using the influence function that provides a quantified measure for disturbances on the resulting filtering outputs and is termed as an influence finite impulse response (IFIR) filter. The main advantage of the proposed method is that the noise statistics of process noise and measurement noise are no longer required in the fusion process, showing that a critical feature of the UFIR filter is inherited. One numerical example and a practice-oriented case are given to illustrate the effectiveness of the proposed method. It is shown that the IFIR filter has adaptive performance and can automatically switch from the Kalman estimate to the UFIR estimates according to operating conditions. Moreover, the proposed method can reduce the effects of optimal horizon length on the UFIR estimate and can give the state estimates of best accuracy among all the compared methods.      

基于激光测距的机载光电成像系统目标定位

针对小型机载光电平台无法准确获取视轴指向问题，设计了一种基于激光测距的目标定位算法。利用机载光电侦察平台锁定跟踪目标的特性，对同一目标多次测量，采用激光测距装置获取目标与载机间的距离信息。根据WGS-84定义的地球椭球模型建立系统的测量方程。考虑到测量方程的非线性，利用扩展卡尔曼滤波对目标位置进行估计。该定位方法精度只受到GPS接收机定位精度和激光测距机测量精度的影响，目标定位误差与机载光电侦察设备视轴指向测量无关。采用蒙特卡洛法仿真分析载机位置测量误差及激光测距系统位置误差对目标定位的影响，结果显示该算法定位精度较高。采用飞行试验数据验证了该目标定位算法的有效性，在飞行高度8 000 m时，目标定位精度优于8 m。相比于传统定位算法，该方法可将定位精度明显提高。同时此定位方法易于部署，可操作性强，具有较大的应用价值。     

Distributed two‐stage state estimation with event‐triggered strategy for multirate sensor networks

This paper investigates the state estimation issue for a class of wireless sensor networks (WSNs) with the consideration of limited energy resources. First, a multirate estimation model is established, and then, a new event‐triggered two‐stage information fusion algorithm is developed based on the optimal fusion criterion weighted by matrices. Compared with the existing methods, the presented fusion algorithm can significantly reduce the communication cost in WSNs and save energy resources of sensors efficiently. Furthermore, by presetting a desired containment probability over the interval [0,1] with the developed event‐triggered mechanism, one can obtain a suitable compromise between the communication cost and the estimation accuracy. Finally, a numerical simulation for the WSN tracking system is given to demonstrate the effectiveness of the proposed method.     

A double laser filtering approach to vibration noise rejection for hot-rolled strip flatness measurement

This paper proposes a new filtering method based on the Kalman filtering algorithm for hot-rolled strip flatness measurement system. The system involves processing slowly changing signal, which can be considered as a bounded random process, and its model parameters are completely unknown. The noise rejection strategy in double lasers can generate a compensation signal. Since the initial and accumulative error would lead to negative filter effect or even cause divergence, Kalman filter is integrated to effectively deal with the initial error and enhance convergence. In this setting, the noise rejection strategy is used as a prediction model to constitute a similar Kalman filter. The correlated error caused by measurement error is coped with by a compensation model based on the feature of correlated error to enhance the filter effect. Both theoretical analysis and simulations show that the new algorithm has a better filter effect than the traditional Kalman filtering algorithm for the system.     

基于PU学习的链接预测方法

基于分类的链接预测方法中,由于链接未知节点对的大规模性与不确定性,选择可靠负例成为构造链接预测分类器的难点问题.为此,文中提出基于正例和无标识样本(PU)学习的链接预测方法.首先,提取节点对的拓扑信息以构造样本集.再利用社区结构确定候选负例的分布,基于分布进行多次欠采样,获得多个候选负例子集,集成多个负例集与正例集中构建的分类器选择可靠负例.最后基于正例与可靠负例构造链接预测分类器.在4个网络数据集上的实验表明文中方法预测结果较优.     

采煤机惯性导航定位动态零速修正技术

基于捷联惯性导航与轴编码器组合的采煤机惯性导航定位是综采工作面可行的采煤机定位技术。惯性导航提供姿态角参数，轴编码器提供速度参数，采煤机惯性导航定位利用航位推算算法解算出东北天坐标系下的位置坐标。为了进一步提高定位精度，在消除确定性偏差的基础上，根据惯性导航姿态误差方程，以东、北、天3个方向的平台失准角为状态量构建状态方程，根据动态零速修正技术的非完整约束条件，以采煤机坐标系横向和垂直方向速度值为观测量构建量测方程，建立卡尔曼滤波模型，并进行移动平台模拟采煤机运行试验验证。在试验条件下，第3刀导航东、北方向最大误差分别由0.639 7，0.856 7 m减小为0.456 4，0.594 2 m。第4刀导航东、北方向最大误差分别由0.644 4，0.910 6 m减小为0.466 5，0.603 0 m。东、北方向定位精度提升了30%。     

A system for time-fluctuating flow rate measurements in a single-blade pump circuit

Commonly used flow rate measurement systems provide an accurate and stable output value of the quasi-stationary flow rate. In some pump types as e.g. single-blade pumps significant flow rate fluctuations may occur even in steady operation points due to rotor-stator interaction. For the analysis of the time-resolved flow rate a new measurement and evaluation method is presented based on an electromagnetic flow meter. Internal averaging of the flow meter is deactivated and the raw signal is evaluated directly with a sampling rate of 3 kHz. With ensemble-averaging in combination with an impeller position detection, interfering signals acting on the time-resolved measurement signal are filtered out. Accompanying numerical simulations of the pump flow circuit are carried out with a 1D method of characteristics and validated against well-established time-resolved pressure measurements of the pump flow. Experiment and simulation show a resembling trend of pressure as well as flow rate fluctuations over the entire operation range of the pump. Thus, by the combined utilisation of measurement and simulation technique, we assure the validity of the ensemble-averaged flow rate fluctuation results. We find that the flow rate fluctuations show a consistent phase shift to the pressure fluctuations that increases towards overload. The flow rate amplitude is an order of magnitude smaller than the amplitude of the pressure fluctuations.