Study on ice-melting performance of gradient gas diffusion layer in proton exchange membrane fuel cell

In this study, a three-dimensional model was established using the lattice Boltzmann method (LBM) to study the internal ice melting process of the gas diffusion layer (GDL) of the proton exchange membrane fuel cell (PEMFC). The single-point second-order curved boundary condition was adopted. The effects of GDL carbon fiber number, growth slope of the number of carbon fibers and carbon fiber diameter on ice melting were studied. The results were revealed that the temperature in the middle and lower part of the gradient distribution GDL is significantly higher than that of the no-gradient GDL. With the increase of the growth slope of the number of carbon fiber, the temperature and melting rate gradually increase, and the position of the solid-liquid interface gradually decreases. The decrease in the number of carbon fibers has a similar effect as the increase in the growth slope of the number of carbon fibers. In addition, as the diameter of the carbon fiber increases, the position of the solid-liquid interface gradually decreases first and then increases.     

LTE室分高倒流小区解决方案的研究

LTE室分高倒流直接影响室内4G用户的感知，同时较大程度拉低LTE网络驻留率指标。由于室内无线环境的封闭性，室分小区之间的覆盖独立性，仅仅通过参数调整的手段达到降低高倒流的效果非常不明显，因此本文针对目前影响室内用户感知的高倒流问题，从高倒流小区的标准出发，对室分高倒流小区的发现手段，产生原因及解决方案进行详尽地阐述，并针对各类型的高倒流情形提出解决方法，最终提供读者发现、分析及解决室分高倒流小区的有效方案，从而作为研究方法提供给LTE室内小区高倒流问题解决的指导意见     

排风扇前盖注射模设计

分析了排风扇前盖塑件的工艺特点,介绍了排风扇前盖注射成型模结构及模具的工作过程。     

基于UG的采煤机防爆盖板三维标注及数控工艺研究

随着三维CAD技术的发展,产品制造信息在三维模型和二维图纸之间的反复传递,严重影响了产品制造信息的正确、快速传递。基于三维产品制造信息技术,以采煤机防爆盖板为例,在UG NX10.0中建立了防爆盖板的三维模型并进行了三维标注,设计了加工工艺路线,规划了数控加工刀具轨迹,进行了加工仿真,验证了数控加工的正确性,在此基础上完成了采煤机防爆盖板的三维工艺式设计。该研究对基于模型定义的数字化设计与制造研究,实现制造业信息化具有重要意义。     

Some physiological characteristics to estimate species potential as a mine reclamation ground cover

In finding what physiological characteristics can be used to predict ground cover success on mine reclamation sites, 14 herb and grass species were tested. Establishment and early growth was tested on three different soils, ie vermiculate and quartz sand mixture, quarry overburden and coal mine overburden in a greenhouse. The results indicate that plant height and cover, transpiration rate and foliar pigments may be used to select plant adaptability to mined soil. White clover (Trifolium repens L.) showed the greatest potential as ground cover for mined soils. Species most widely used in reclamation tended to be perennials of moderate rate.     

Using spray-dried sugar beet molasses in ice cream as a novel bulking agent

In this study, it is aimed to investigate and evaluate the use of molasses which is a by-product of sugar production as a novel bulking agent in ice cream as a sugar replacer. Sugar beet molasses (75%) and 12 DE maltodextrin (25%) were converted into powder form by spray drying. Spray-dried sugar beet molasses (SDSM) was then used as a substitute of sugar in different ratios (0:100, 25:75, 50:50, 75:25 and 100:0) in the ice cream products. The increased amount of SDSM decreased the overrun, L*, whiteness index (WI) and melting behaviours and increased a*, b*, total phenolic content, consistency and viscosity. Meanwhile, thermal properties have not been affected by the use of SDSM (P < 0.05). The sensory findings have been particularly interesting especially when replacing above 50% sugar with SDSM, aroma, flavour and general acceptability decrease. According to the results of this study, substituting 25% of total sugar with SDSM as a bulking agent can decrease cost of the product and improve total phenolic content and some quality parameters without compromising sensorial properties.     

A comparative study of 3E (energy,exergy, and economy) analysis of various solar stills

In this paper, an experimental study of the conventional solar still (CSS), the conventional solar still with glass cooling (CSSGC), the conventional solar still with basin heating (CSSBH), and the conventional solar still with glass cooling and basin heating (CSSGCBH) was carried out on the basis of the distilled water production, the energy efficiency (EnE), the exergy efficiency (ExE), and economic analysis. The CSSGC and CSSBH contain Peltier modules for cooling the glass and heating the basin. The evaporative heat transfer coefficient for all the experimental stills was calculated. The values of daily distilled water production from the CSSGCBH, CSSBH, CSSGC, and CSS were 4.56, 3.79, 2.49, and 1.89 kg/m², respectively. The daily distilled yield of the CSSBH and CSSGCBH were increased by 58.55% and 50.13%, respectively, as compared with the CSS. Moreover, the daily EnE and ExE of the CSSGCBH were 27.03% and 3.5%, respectively, whereas the EnE and ExE of the CSS were 10.88% and 1.3%, respectively. Furthermore, the cost of distilled water production was found to be 0.26, 0.35, 0.53, and 0.64 $/day for the CSS, CSSGC, CSSBH, and CSSGCBH, respectively, if the selling price of the distilled water was Rs10.     

充气膜承冰壳结构形态设计及其建造实践

充气膜承冰壳结构是通过对充气 膜喷溅液体材料，待其凝结成型后撤除充气 膜形成的冰壳结构，该技术始于20世纪40年 代的充气膜承薄壳混凝土结构。文章通过比 对混凝土薄壳和冰壳的差异性，梳理充气膜 承薄壳结构的发展主线，对其形态设计方法 进行总结。结合“2017哈尔滨国际冰雪建造 节”相关建造实践，从施工方案的拟定与实 践、施工材料的选择与工艺以及施工工法的 对比与分析三方面对充气膜承冰壳结构形态 设计与建造实践进行总结与备忘，并对其后 期维护相关条件与技术进行讨论。     

基于ISIGHT的安全气囊盖板结构优化设计方法研究

选取某款弱化沟槽呈“H”形的聚碳酸酯/丙烯腈?丁二烯?苯乙烯共聚物(PC/ABS)合金材质安全气囊盖板为研究对象，并构建了其有限元仿真模型，对比有限元力学仿真分析结果与理论计算值验证了该有限元仿真模型的可靠性；通过ISIGHT软件集成Catia和ANSYS，选取安全气囊盖板弱化沟槽的横向长度、深度，纵向长度、深度4个参数作为设计变量，选取弱化沟槽横向最大应力与纵向最大应力作为响应变量，分析了设计变量对响应变量的贡献度分布特征并采用NSGA遗传算法对响应变量多目标优化。结果表明,横向长度、纵向深度对横向最大应力为负贡献度，横向深度、纵向长度为正贡献度；横向深度、纵向长度对纵向最大应力为负贡献度，横向长度、纵向深度为正贡献度；在合理范围内，4个参数值的优化设计，实现了横向最大应力提高和纵向最大应力降低的多目标优化，有效减少了安全气囊盖板爆破时产生的碎屑量，提升了产品的安全性能。     

Ice Crystal Growth in Sucrose Solutions Containing Kappa- and Iota-Carrageenans

Measurements of ice recrystallization inhibition (IRI) and thermal hysteresis (TH) activities of kappa (κ)- and iota (ι)-carrageenans were carried out to examine whether they can be novel cryoprotectants or not. IRI measurements indicate that both carrageenans reduce recrystallization in sucrose solution, but that the IRI activity of κ-carregeenan is higher than that of ι-carrageenan. TH measurements indicate that κ- and ι-carrageenans do not exhibit TH activity. TH activity measurements of antifreeze glycoprotein (AFGP) in the presence of κ-carregeenan demonstrate that this carregeenan neither influences the TH activity of AFGP nor the shape of the ice crystals. The round ice crystal shape transformed into an angular and elongated shape in the presence of both carregeenans.