Multi-dimensional modeling of mixture preparation in a direct injection engine fueled with gaseous hydrogen

With the recent advances of direct injection (DI) technology, introducing hydrogen into the combustion chamber through DI is being considered as a viable approach to circumvent backfire and pre-ignition encountered in early generations of hydrogen engines. As part of a broader vision to develop a robust numerical model to study hydrogen spark ignition (SI) combustion in internal combustion (IC) engines, the present numerical investigation focuses on mixture preparation in a hydrogen DI SI engine. This study is carried out with a single hole injector with gaseous hydrogen injected at 100 bar injection pressure. Simulations are carried out for high and low tumble configurations and validated against optical data acquired from planar laser induced fluorescence (PLIF) measurements. Varying mesh configurations are investigated for the impact on in-cylinder mixture distribution. A particular emphasis is placed on the effect of nozzle geometry and mesh orientation near the wall. Overall, the computational model is found to predict the mixture distribution in the combustion cylinder reasonably well. The results showed that the alignment of mesh with the flow direction is important to achieve good agreement between numerical analysis and optical measurement data.     

稳产国Ⅵ柴油并兼产喷气燃料技术方案的工业应用

介绍了浙江石油化工有限公司新建的3 Mt/a柴油加氢精制装置，其配套使用中国石化石油化工科学研究院有限公司开发的催化剂级配技术，并实施了可根据原料供应及市场产品需求情况灵活调整切换的2种生产技术方案。1 a的安稳生产运行结果表明:该装置以直馏柴油为主原料，通过分馏塔的馏分切割及其侧线抽出，实现了稳产国Ⅵ柴油并兼产喷气燃料技术方案的工业化应用；在实施以兼产喷气燃料为主的生产技术方案时，通过调整常一线柴油的掺炼量，不仅可以生产含硫量小于10.0 μg/g的精制柴油产品，同时兼产所得到的喷气燃料产品含硫量小于0.5 μg/g，赛波特颜色号值大于30；在实施主产精制柴油组分方案时，通过掺炼质量分数为20%~40%的催化柴油，并使所提炼得到的精制柴油组分含硫量小于6.0 μg/g的前提下，这些精制柴油组分产品既可直接作为满足国Ⅵ柴油产品出厂待售，也可作为柴油调和组分储存待用于产品的进一步优化。     

生物质基喷气燃料的生产及应用进展

生物质基喷气燃料是指全部或大部分来源于生物资源的喷气燃料，符合清洁低碳、安全高效的现代能源体系的要求。以生物质基喷气燃料替代传统石油基喷气燃料有助于我国早日实现“碳达峰、碳中和”的远大目标。在阐述生物质基喷气燃料生产工艺的发展历程及生物质基喷气燃料应用现状的基础上，提出高密度的生物质基喷气燃料是未来喷气燃料的发展方向，具有多环结构的生物质是合成高密度生物质基喷气燃料组分的优质原料；同时，总结了高密度生物质基喷气燃料组分生产工艺的研究进展，展望了生物质基喷气燃料未来的发展及挑战。     

压力容器环形下降段内含硼溶液流动混合特性的数值模拟分析

发生堆芯应急冷却安注时，外部注入的含硼冷却剂与稀释水团将在环形下降段内发生混合，含硼冷却剂与稀释水团混合不均匀可能导致堆芯重返临界。本文基于Fluent 18.0对环形下降段内的流动混合特性进行分析。横截面的速度分布显示，入口截面的水平方向速度随周向位置的增加而显著衰减，而环形下降段下部区域横截面的速度分布趋于平缓；三维流线图显示，流体进入压力容器后在环腔内壁发生剧烈碰撞，随后绕环形下降段呈放射状流动。通过自定义硼酸溶液，并模拟其与稀释水团之间混合，数值结果与相关的实验研究结果较为一致；三维浓度分布显示，雷诺数较低时入口硼酸溶液将停滞在环形下降段上部空间，增加入口雷诺数有利于搅混均匀。     

Large eddy simulation on the flow characteristics of an argon thermal plasma jet

Large eddy simulations based on the CFD software OpenFOAM have been used to study the effect of Reynolds number and turbulence intensity on the flow and mixing characteristics of an argon thermal plasma jet.Detailed analysis was carried out with respect to four aspects:the average flow field,the instantaneous flow field,turbulence statistical characteristics and the self-similarity.It was shown that for the argon thermal plasma jet with low Reynolds number,increasing the turbulence intensity will increase the turbulent transport mechanism in the mixing layer rather than in the jet axis,leading to the faster development of turbulence.The effect of the turbulent transport mechanism increases with increasing Reynolds number.However,the characteristics of flow and mixing are not affected by turbulence intensity for high Reynolds number situations.It was also found that the mean axial velocity and mean temperature in the axis of the turbulent thermal plasma jet satisfy the self-similarity aspects downstream.In addition,decay constant K is 1.25,which is much smaller than that(5.7-6.1)of the turbulent cold gas jet and has nothing to do with the Reynolds number or turbulence intensity in the jet inlet.     

高压水射流环切割缝自卸压机制与应用

为解决深部矿井低透气性煤层瓦斯抽采难题，针对穿层钻孔提出了高压水射流环切割缝煤层自卸压增透技术。通过瓦斯流动理论分析普通钻孔及环割钻孔瓦斯流动模式，分别建立了普通钻孔及环割钻孔瓦斯流动微分方程，获得了高压水射流环切割缝自卸压技术改善煤层瓦斯流动机制;采用FLAC3D软件建模分析高压水射流割缝后钻孔周边煤体应力演化规律，基于煤体卸压程度及塑性区分布特征，确定了穿层钻孔合理化割缝参数;通过底板穿层钻孔高压水射流环切割缝技术现场考察，环切割缝后煤层变形量达到0.136%，煤层透气性系数较原始状态提高了42倍，瓦斯抽采纯量相较普通钻孔提高3.44~5.32倍，同等条件下煤层抽采半径提高了1倍以上。理论研究与现场试验均表明，采用高压水射流切割在煤层内部形成环形缝槽，能有效改善钻孔煤体应力状态，增加煤层渗透性，提高瓦斯抽采效率。     

The effect of turbulent jet induced by pre-chamber sparkplug on combustion characteristics of hydrogen-air pre-mixture

Effect of turbulent jet ignition induced by pre-chamber sparkplug (PCSP), a simper version of turbulent jet ignition pre-chamber system without fuel injection, on the air-hydrogen combustion characteristics was conducted based on an optical constant volume chamber under varied equivalence ratio conditions. The dynamic pressure sensor and schlieren system were used to evaluate the heat release and flame propagation characteristics. The results confirm the feasibility of PCSP type turbulent jet. The jet increase the flame propagation speed significantly compared to standard ignition, which shorten ignition delay and combustion duration, advance T50 largely, and increase the maximum combustion pressure slightly. As a result, the combustion intensity is increased largely, especially under lean regime, the combustion intensity index can be as high as 1.7 at certain equivalence ratio. In addition, the PCSP turbulent jet reduces the sensitivity of heat release to variation of equivalence ratio, which is helpful to simplify the combustion controlling strategy. Furthermore, with the enhancement of the flame propagation, the tendency of knocking combustion can be suppressed potentially.     

Directed Molecular Collection by E‐Jet Printed Microscale Chemical Potential Wells in Hydrogel Films

A facile approach to locally concentrate analytes of interest will significantly enhance miniaturized, integrated chemical‐analysis systems. Here, the directed analyte transport and concentration using ≈200 µm‐diameter E‐jet printed chemical potential wells in a polyacrylamide hydrogel is demonstrated. Using a cationic well as the model system, anionic analytes are accumulated into a microscale area with a local concentration enhancement of >50‐fold relative to the surrounding area. By downscaling the diameter of the chemical potential well from a few millimeters to 100s of micrometers, it is found, using both fluorescence and Raman microscopy, that the molecular collection capacity of the well is greatly improved. Additionally, it is shown that molecules can be simultaneously transported and concentrated to arrays of microscale regions using an array of microscale chemical potential wells. This approach enhances many‐fold the limit of detection, enables the formation of microscale potential well arrays with a variety of chemical properties, and provides a novel microscale molecular manipulation technique as an alternative to traditional microfluidic‐based systems.     

加氢裂化装置柴油回炼增产喷气燃料和石脑油

中海油惠州石化有限公司3.6 Mt/a加氢裂化装置柴油回炼增产喷气燃料和石脑油的工业应用结果表明，在不改变装置结构和催化剂的基础上，回炼少量柴油（4%），转化率可达到75%，喷气燃料、石脑油目标产品收率提高3.29百分点，喷气燃料烟点略有提高，柴油十六烷值提高3.9个单位，产品质量合格，装置能耗略有增加，从856.21 MJ/t增加到859.72 MJ/t。     

The Impingement Heat Transfer Data of Inclined Jet in Cooling Applications: A Review

On the impingement heat transfer data,the experimental studies of air and liquid jets impingement to the flat surfaces were collected and critically reviewed.The oblique impingements of both single circular and planar slot jets were considered in particular.The review focused on the surface where the jet impingement cooling technique was utilized.The nozzle exit Reynolds numbers based on the hydraulic diameter varied in the range of 1,500–52,000.The oblique angles relative to the plane surface and the dimensionless jet-to-plate spacing vary in the range of 15°–90°and 2–12 respectively.The review suggested that the magnitude of maximum heat transfer shifted more for air jets compared with the liquid jets.The drop in the inclination angle and the jet-to-plate separation led to the increase in the asymmetry of heat transfer distribution.The displacement of maximum Nusselt number(heat transfer)locations was found to be sensitive to the inclination angle and the smaller jet-to-plate distance.Also,the Nusselt number correlations proposed by various researchers were discussed and compared with the results of the cited references.