南水北调中线总干渠藻类的生态调度

南水北调中线总干渠无在线调蓄水库,对藻类生态调度过程中出现的问题开展生态调度实现策略和实施方式研究。主要实现策略包括:划定自身的调蓄区,隔离生态调度对下游的影响;采用高效的渠池运行方式,减少生态调度时蓄量的反复调整;综合考虑安全、快速、平稳等需求,设定生态调度实施进程和方式。具体实施方式包括:将总干渠划分为流速调控区、调蓄区和正常运行区,分别实施等体积、控制蓄量和闸前常水位方式运行;将生态调度过程划分为充水阶段和泄水阶段,基于流速调控目标值、持续时长和水位降幅约束条件,确定各阶段时长和各分区的闸门群调控方案等。基于2018年3月输水工况,采用明渠一维非恒定流模型,仿真总干渠上游15个渠池的藻类生态调度过程。结果表明,生态调度可在3.5 d内完成,各渠池的平均流速由0.48 m/s增至0.93 m/s,持续时间超过2 h。在整个生态调度过程中,水位变化平稳,水位变幅符合安全阈值要求,下游渠道的正常运行未受生态调度明显影响。     

Visible light active Cu-doped iron oxide for photocatalytic treatment of methylene blue

In recent work, pure α-Fe₂O₃ (F-1) and series of 5% Cu doped Fe₂O₃ (CF-5) , 10% Cu doped Fe₂O₃ (CF-10) and 15% Cu doped Fe₂O₃ (CF-15) nanoparticles by facile chemical coprecipitation method were synthesized to study the effect of concentration of doping for photocatalytic activity. As prepared F-1, CF-5, CF-10, CF-15 nanoparticles were subjected to X-ray diffraction (XRD) and Fourier transform infra-red (FTIR) techniques to analyse the structural and functional groups features. These characterization techniques confirmed the successful doping of Cu ²⁺ ions in α-Fe₂O₃. The crystallite size of synthesized samples was calculated by Scherrer formula. Gradually decline in crystallite size from 18 to 15 nm was observed for undoped to doped samples. Scanning electron microscopic (SEM) analysis expressed that doping of Cu reduced the aggregation of particles and enhanced the surface area of nanoparticles. UV–Visible spectroscopic analysis of synthesized samples was used to calculate the bandgap energy of F-1, CF-5, CF-10, CF-15 nanoparticles i.e., 2.0, 1.7, 1.5, 1.4eV respectively. Narrowing bandgap energy of doped hematite supported to perform excellent photocatalytic activity. Maximum degradation of methylene blue was recorded via CF-10 within 140 min. Higher degradation rate of methylene blue by optimal concentration of CF-10 is due to effective electron trapping ability of photocatalyst.     

Synthesis and characterization of ZnO NRs with spray coated GO for enhanced photocatalytic activity

Zinc oxide nanorods, ZnO NRs, were synthesized on a clean glass and coated with graphene oxide (GO) using spray coating method to enhance the photocatalytic activity in wastewater treatment. The ZnO NRs were synthesized using the solution process synthesis that was optimized using Taguchi method. Several synthesis parameters have been optimized and studied to determine the best synthesis parameter to grow ZnO NRs for the photodegradation of organic contaminants. Field emission scanning electron microscopy (FESEM) with EDX, X-ray diffraction (XRD), Raman, ultraviolet visible near-infrared (UV-VIS-NIR), and photoluminescence (PL) spectroscopies were used to investigate the structural and optical properties of the produced nanorods. FESEM images revealed the vertical growth of ZnO NRs as well as layers of GO covering the ZnO NRs' top surface. The Raman study demonstrates the combination peak of GO and ZnO, hence proving the GO layer's successful coating. After the GO coating, decrease in the bandgap of the synthesized photocatalyst was detected by PL and UV–Vis absorption measurements. Under UVC exposure with treatment time of 6 h, the degradation of MB with ZnO NRs/GO photocatalyst reached a degradation percentage of 97.86%, which is greater than the degradation percentage achieved using pristine ZnO NRs, which is 93.28%. The results validated that the coating of GO enhances the photocatalytic activity of the host material, ZnO NRs.     

十二烷基硫酸钠修饰NiFe2O4对亚甲基蓝的类芬顿催化氧化性能

采用化学沉淀法制备了十二烷基硫酸钠（SDS）改性的纳米酸镍（记为NiFe₂O₄-S），利用X射线衍射（XRD）、红外光谱（FTIR）、能谱（EDS）、透射电镜（TEM）、BET比表面等技术手段对样品进行了表征。采用多相芬顿氧化技术，以亚甲基蓝溶液为模拟污染物废水，研究了SDS对铁酸镍的改性效果、亚甲基蓝溶液初始pH以及催化剂循环使用等不同条件因素对样品类芬顿催化活性的影响。结果显示，经SDS改性后的NiFe₂O₄-S比纯相NiFe₂O₄表现出了更优异的催化性能，NiFe₂O₄-S对酸性（pH=3.5）、近中性（pH=6.5）和碱性（pH=9.5）的亚甲基蓝溶液均有着较好的催化降解效果；NiFe₂O₄-S具有良好的催化稳定性和重复使用性。对该催化反应体系的作用机理进行了详细探讨，NiFe₂O₄-S表现出优异的类芬顿催化活性归因于更强的电子转移能力，吸附的SDS能促进H₂O₂和 \text{?} {\mathrm{O}}_{\mathrm{2}}^{\text{-}} 分别与表面Fe³⁺反应将其还原转化为Fe²⁺。·OH是直接分解亚甲基蓝的活性物种，反应中NiFe₂O₄-S表面较高浓度的Fe²⁺可以有效地把H₂O₂分解为·OH。SDS增强了催化剂表面对亚甲基蓝的吸附能力，促进了·OH与亚甲基蓝的分解反应。     

Efficient sunlight and UV photocatalytic degradation of Methyl Orange,Methylene Blue and Rhodamine B,using Citrus×paradisi synthesized SnO2 semiconductor nanoparticles

In this work, tin dioxide (SnO2) Nanoparticles (NPs) were synthesized through green synthesis, using Citrus × paradisi extract as a stabilizing (capping). The extract concentrations used were 1, 2 and 4% in relation to the aqueous solution. The resulting SnO2 NPs were used for the degradation of Methyl Orange (MO), Methylene Blue (MB) and Rhodamine B (RhB), under both solar and UV radiation. The NPs were characterized via Attenuated Total Reflectance Infrared Spectroscopy (ATR-IR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM-SAED), the Brunauer-Emmett-Teller (BET) theory, Ultraviolet to Visible spectroscopy (UV–Vis), and Photoluminescence spectroscopy (PL); while the photocatalytic degradation was evaluated using UV-VIS. The results showed that the Citrus × paradisi extract is a good medium for the formation of SnO2 NPs. These NPs presented quasi-spherical morphology, particle sizes of 4–8 nm, with a rutile phase crystalline structure, and with banned gap of 2.69 at 3.28 eV. The NPs had excellent photocatalytic properties under solar radiation, degrading 100% of the OM in 180 min. Furthermore, under UV radiation, 100% degradation of the three dyes was achieved in a short time; 20 min for MO, and 60 min for MB and RhB. Therefore, green synthesis is a feasible medium for the formation of SnO2 NPs with good photocatalytic properties.     

Template confined construction of Fe–NiCoP/NiCoP/NF heterostructures for highly efficient electrocatalytic oxygen evolution reaction

Rational design of oxygen evolution reaction (OER) electrocatalysts with advance nanostructures and composition superiority is an urgent need to promote electrocatalytic property. In this research, we fabricate Fe–NiCoP/NiCoP/NF electrocatalyst for OER via the interfacial scaffolding strategy with Prussian-blue-analogue (PBA) followed by low-temperature phosphating. The cube-on-sheet multimetallic-TMPs-based nanoarchitecture of Fe–NiCoP/NiCoP/NF exhibits outstanding OER performance, which only requires the overpotential of 201 mV to achieve a current density of 10 mA cm⁻² and possesses good durability up to 50 h in 1.0 M KOH solution. The superior OER property of Fe–NiCoP/NiCoP/NF is mainly characteristic to the rich composition that optimizes the electronic structure and the cube-on-sheet multimetallic-TMPs-based nanoarchitecture which can facilitate more effective active sites exposure and ultimately promote charge transfer at the same time. This research provides a new strategy for the construction of advanced nanoarrays structure and the improvement of the electrocatalytic performance of polymetallic phosphides, which offers its promising applications especially in energy storage and conversion technology.     

Potassium ions stabilized hollow Mn-based prussian blue analogue nanocubes as cathode for high performance sodium ions battery

Mn-based Prussian blue analogue is regarded as one of the promising cathodes for sodium ions battery owing to its high theoretical capacity and low cost. However, the unstable structure during charging/discharging process and the poor cycle life hinder its commercial application. In this work, potassium ions stabilized hollow Mn-based Prussian blue analogue is synthesized through a simple sodium citrate assisted method using for cathode of sodium-ions batteries. Although unique hollow structure could suffer volume variation during charging/discharging process, the K⁺ is introduced to further stabilize its structure. The PBAs cathode exhibits a high reversible specific capacity of 128 mA h g^?1 at 50 mA and superior rate performance of 72 mA h g^?1 at a high current density of 3200 mA g^?1, which is attributed to its stable structure and enhanced sodium ions transport kinetics. Ex-situ XRD/Raman tests and electrochemical measurements further prove the synergistic effect of various alkali ions (K⁺/Na⁺) and unique hollow structure. They work together to improve the structural stability and promote sodium ions diffusion rate of Mn-based PBAs.