采用绝热式自燃测试方法分析煤的自燃倾向

对煤的自燃倾向进行快速有效鉴别,有助于对煤的自燃倾向采取分级分类管理从而有效防治煤矿火灾,因而采用绝热式自燃测试方法对煤的自燃倾向进行准确分析很有必要。简要介绍绝热式自燃测试方法的测试原理及其仪器结构,模拟煤炭自燃的物理过程,通过采用包括反应器、气体预热铜管和跟踪温度控制方式等综合绝热措施以实现300 g煤样的自然发火实验,记录煤样从40℃上升到70℃的升温速率(或前30 h的升温速率),测试煤样的自燃特性曲线并分析曲线特征。即建立煤绝热氧化产热速率计算模型,结合实验数据计算所得的煤在绝热氧化条件下的升温速率和产热速率可鉴定煤自燃倾向性的强弱。采用绝热式自燃测试方法对不同煤的自燃倾向分析后表明,无烟煤和部分烟煤的自燃倾向较低,褐煤的自燃倾向较高,故而在煤矿开采时需特别注意褐煤的自燃倾向。     

Hot cracking tendency test and simulation of 7075 semi-solid aluminium alloy

The hot cracking tendency of 7075 semi-solid alloy under different conditions was studied by critical diameter method. The experiment and simulation results show that the dendrite arms of the rod grow from the edge to the center. The smaller the diameter of the rod is, the more obvious the directional growth of dendrite is, and the greater the tendency of hot cracking is. Compared with ordinary melt, for semi-solid slurry, increasing mould temperature or decreasing pouring temperature can significantly decrease hot cracking tendency of 7075 alloy, decreasing hot cracking grade from 256 to 100 mm². Furthermore, based on the RDG criterion, the effects of solidification conditions on the hot cracking tendency were discussed combined with simulation. At the same time, the application and development of RDG criterion were also researched.     

2014年我国冷却设备行业发展现状及展望

对2014年我国冷却设备行业的发展状况进行了较为全面的叙述,对目前行业发展面临的一些问题做了比较客观的概括和总结,对行业发展趋势提出了一些观点及看法。     

纺织数码喷墨印花发展趋势

阐述了印染工艺的含义及分类,介绍了传统丝网印花原理以及优缺点,分析了传统丝网印花与数码喷墨印花的本质区别。详细介绍了数码喷墨印花在加工、交货周期、印花效果以及环保节能方面的优势,阐述纺织数码印花产业集中区域,预估全球数码印花量增长趋势。     

引水式水电站变顶高尾水洞水力特性和体型优化

考虑引水式水电站常用的有压尾水洞和变顶高尾水洞两类布置型式,采用基于特征线法的有压管道瞬变流分析模型和适用于明满流过渡过程分析的改进狭缝法模型,分别分析系统的过渡过程特性和尾水洞体型参数的敏感性,研究不同的尾水洞型式下尾水系统的水力特性,进一步揭示了变顶高尾水洞的底宽、洞高和顶坡对尾水管进口最小内水压力的影响规律。结果表明,与增大面积的有压尾水洞比较,变顶高尾水洞是一种可行的布置型式,可有效提高尾水管进口的最小内水压力且水锤过程衰减较快;合理增大变顶高尾水洞底宽、洞高或顶坡均可不同程度地改善尾水管进口最小内水压力,其中顶坡的影响相对明显,为体型优化设计提供了参考依据。     

Ergonomics interventions to reduce musculoskeletal risk factors in a truck manufacturing plant

Ergonomic interventions may potentially reduce MSDs, but the context of industries (barriers, ever-changing situations, dialogue processes) might play a significant role in the success of interventions. This study evaluates the effectiveness of ergonomic interventions including engineering/technical and organizational interventions, and the involvement of the stakeholders in reducing musculoskeletal risk factors/symptoms. A pre-post-test experimental study in non-randomized groups was performed over three years in a sector of a truck assembly plant. The mean age of the operators in the sector for the initial and second assessment time was 42.0 (±7.6) years and 39.0 (±8.7), respectively. The mean length of work experience in the current job was 15.2 (±7.2) years and 13.9 (±7.3) for the initial and second assessment times, respectively. Five engineering ergonomic solutions and organizational interventions were implemented after a comprehensive ergonomic analysis. The organizational interventions consisted mostly of transferring and redistributing the tasks, i.e., ergonomically balancing and redesigning of the workstations. Before performing the interventions, the findings of the ergonomic study were presented at several meetings to encourage the involvement of the stakeholders (including managers, engineers, and operators) in the interventions. This study showed that a combination of ergonomic measures—engineering and organizational interventions—could reduce physical workloads. Musculoskeletal symptoms decreased after interventions although the difference was not significant.     

变化环境下由设计暴雨推求设计洪水方法研究

为推求变化环境下的设计洪水,以黄河上游唐乃亥站以上流域1967~2006年的年最大15d降雨量系列为例,基于设计暴雨与SWAT模型相结合的方法,首先构建变参数概率分布函数模型描述变化环境下非一致性暴雨极值系列的分布规律,随后基于等可靠度方法推求给定重现期条件下的设计暴雨值,再结合SWAT水文模型推求设计洪水。结果表明,变化环境下唐乃亥站以上流域各设计频率(P=10%、5%、2%、1%)的设计暴雨值随工程设计寿命(20、30、50、80、100年)的增大而减小,百年一遇设计洪峰从3 292m^3/s降至3 023m^3/s,洪量从29.9×10^8 m^3降至27.4×10^8 m^3。实例应用验证了该方法的可行性,可为变化环境下的设计洪水计算提供参考。     

五流中间包稳态及非稳态试验

为改善国内某钢厂五流中间包流场,降低非稳态换包过程的负面影响,获得高品质洁净钢,通过水模拟试验进行稳态及非稳态换包过程的研究。试验结果表明,采用方案3的稳流器结构对该中间包稳态浇铸的流场更加有利,该试验条件下的死区体积比例为10.46%;非稳态换包过程的最佳工艺条件为换包液位350 mm、充包流量12 m3/h。     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.