“方变圆”变径筒状结构滑模施工技术

为解决塔式光热的核心构筑物吸热塔"方变圆"变径超高筒体结构施工难题,选用一套可变形的滑模平台系统,通过操作系统上可调千斤顶支座、门架横向液压千斤顶装置、多处可调节模板角度和收缩模板的丝杆等,使得滑模根据施工需求可在一定的范围内调节模板倾角、间距,并逐步完成收缩变形,其理论滑模允许偏角20°,最终高效完成异形结构施工。该滑模系统刚度大、承载及堆料能力强、空间大、机械化程度高,施工操作简单,安全性高,适应沙漠极端环境。全过程仅需使用一套滑模体系,就能完成方形段、方变圆的变形段及圆形段施工,大大提高了施工效率,为类似环境下相似结构的施工提供了一定的参考。     

大管径供水管线的安装与腐蚀防护分析

在近些年的发展中,我国经济水平得到了一个显著的增长,经济的增长推动了城市化的发展进程,进入21世纪,城市绿化工程建设规模呈一个稳定上升的趋势,在这种大的社会环境形势下,如何做好绿化大管径供水管线的安装与腐蚀防护工作成为了行业关注的焦点。大管径供水管线的稳定性关系着城市发展的可持续性,要从多方面做好大管径供水管线的安装工作,采取有效的措施应对管线腐蚀问题。     

Numerical Investigation of the Capture of Polydisperse Particles by Charged Droplets

The capture of particles by charged droplets was simulated by considering the electrostatic interactions of droplet-droplet and droplet-particle. The results indicate that the electrostatic repulsion between droplets leads to a dynamic accumulation mode of particles. However, the droplet spacing has an insignificant effect on the capture efficiency when the electrostatic deposition predominates. The increase of droplet charge remarkably improves the capture efficiency, in which the capture of fine particles accounts for the largest proportion. Compared to the droplet charge, the droplet size shows a limited improvement in the capture efficiency. Reducing the droplet velocity prolongs the capture time instead of enhancing the capture capacity per unit time, thereby improving capture efficiency.     

浅析火力发电厂汽水系统中内径管与外径管的设计选择

按照管道加工工艺的不同,管道可分为内径控制管和外径控制管。通过热轧工艺生产的外径控制无缝钢管,可满足火力发电厂汽水系统中绝大部分管道的使用要求。对于超(超)临界机组的主蒸汽和高温再热蒸汽管道采用的P91/P92材质的大口径厚壁无缝钢管,由于对材料性能和加工工艺有特殊要求,因此宜采用内径控制管。     

煤层顶板硬岩大直径定向钻孔施工关键技术

根据顶板高位定向钻孔快速钻进成孔与工作面卸压瓦斯高效抽采治理需要，针对现有螺杆马达定向钻进技术与分级扩孔方法存在的问题，开展了顶板硬岩定向钻进与大直径扩孔钻进关键技术研究，开发了冲击回转定向钻进技术、扭冲回转定向钻进技术、扭冲旋转扩孔技术以及双级双速扩孔技术等钻孔提速新技术，研制了冲击螺杆马达、矿用小直径扭力冲击器、双级双速螺杆马达、组合式扩孔钻头等配套钻具。综合试验结果表明，硬岩定向钻孔平均机械钻进效率达到8.34 m/h，最高达到13.6 m/h，较常规螺杆马达定向钻进技术提升20%~30%；硬岩大直径扩孔终孔直径达到200 mm，机械钻进效率平均达到5.6 m/h以上，最高达到10.5 m/h。该技术提升了顶板硬岩定向钻进效率与大直径扩孔钻进效率，缩短了顶板高位定向钻孔的综合施工周期，为大直径高位定向长钻孔快速成孔与高效抽采治理回采工作面卸压瓦斯提供了可靠的技术手段。     

出口直径对内混式空气雾化喷嘴雾化特性及降尘性能的影响

为了掌握喷嘴出口直径对气水喷雾降尘的影响,基于自行设计的气水喷雾降尘实验平台,对不同出口直径的空气雾化喷嘴流量、雾化特性及降尘性能进行了实测,并对实验结果作对比分析。研究结果表明:随着出口直径的增加,喷嘴耗水量几乎保持线性增长,而耗气量呈现指数增长的变化趋势;喷雾射程和雾滴体积分数均随着出口直径的增大不断增大,而雾化角先增大后减小;出口直径为2. 0 mm的喷嘴雾化质量最好,所形成的雾滴索太尔平均直径D[3,2]最小,且雾滴粒径呈现正态分布,雾滴尺寸较为集中;雾滴速度沿喷嘴轴线方向不断衰减,且喷嘴直径越大雾滴速度衰减越缓慢;随着喷嘴直径的增加,雾滴速度呈现先增大后减小的变化规律;全尘和呼吸性粉尘降尘效率随着喷嘴出口直径的增加均有所提高,但增幅较小;综合考虑喷嘴降尘性能、耗水量和耗气量等因素,在采掘作业场所进行气水喷雾降尘时,选择出口直径为2. 0～3. 0 mm的空气雾化喷嘴较为合适。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

温度、保湿时间及菌龄对扩展青霉 H1侵染柑橘能力的影响

近年来,由扩展青霉(Penicillium expansum)引起的柑橘病害日益严重,目前对于柑橘采后病原菌侵染的研究主要以指状青霉(P.digitatum)和意大利青霉(P.italicum)为主,而对P.expansum侵染柑橘条件的研究还未见相关文献报道。作者以实验室前期筛选鉴定的P.expansum H1为研究对象,研究了不同温度、保湿时间和菌龄对P.expansum H1侵染柑橘的影响,结果表明,P.expansum H1在25℃时潜育期最短,侵染能力最强,4℃时P.expansum H1侵染能力受到抑制;保湿时间越长,越有利于P.expansum H1侵染柑橘;菌龄也会影响P.expansum H1侵染柑橘,不同菌龄的P.expansum H1侵染能力高低排序为:培养7 d培养11 d培养15 d培养9 d培养3 d。     

喷淋液滴在空气环境下的运动特性

本文以喷淋液滴在空气环境下运动特性为工程背景，建立单个液滴在常温、常压空气环境中的动量方程，分析液滴沉降特性、追赶特性及运动轨迹行为。计算结果表明，不同喷淋液滴初始条件下，短时间内存在重力大于曳力和重力小于曳力两种情况，但最终减速液滴均会达到受力平衡状态；液滴离开喷淋头后，垂向位移均迅速增大，液滴粒径越大、初始速度越大，垂向位移增长的速率也越大，达到相同位移的用时越短；液滴尺寸、初始速度相差越大，液滴追赶所用的时间越短，追赶位移越小，液滴尺寸、初始速度越接近，液滴追赶所用的时间越长，追赶位移越大；液滴初始速度越大、初始直径越大、喷射角度越大，横向速度消失越慢，达到的横向位移越大，喷射液滴覆盖的面积也越大。计算结果有助于优化工程实际中喷淋系统的设计与布置。     

Measuring local droplet parameters using single optical fiber probe

This article proposes a new single optical fiber probe (OFP) sensor method for measuring local droplet parameters such as droplet fraction, droplet velocity, and droplet diameter. To this end, we developed a stretched conical optical fiber probe (SC-OFP) sensor that minimizes the wetting of the sensing tip at a high droplet velocity, a discrimination algorithm based on the first and second derivatives of the output of the raw signal of the OFP sensor, and a method that uses neural network training to determine local droplet velocity independently of droplet size. In the experiments conducted, the developed SC-OFP sensor measured local droplet velocity with a mean absolute percentage error (MAPE) smaller than 4.1% for velocities ranging from 2 to 32 m/s, and droplet diameter with a MAPE smaller than 4.9% for diameters ranging from 0.29 to 1.78 mm.