Additive Manufacturing of Stable Energy Storage Devices Using a Multinozzle Printing System

The development of the Internet of things has prompted an exponential increase in the demand for flexible, wearable devices, thereby posing new challenges to their integration and conformalization. Additive manufacturing facilitates the fabrication of complex parts via a single integrated process. Herein, the development of a multinozzle, multimaterial printing device is reported. This device accommodates the various characteristics of printing materials, ensures high-capacity printing, and can accommodate a wide range of material viscosities from 0 to 1000 Cp. Complete capacitors, inclusive of the current collector, electrode, and electrolyte, can be printed without repeated clamping to complete the preheating, printing, and sintering processes. This method addresses the poor stability issue associated with printed electrode materials. Furthermore, after the intercalation of LiFePO₄ with Na ions, X-ray photoelectron spectroscopy and X-ray diffraction results reveal that the Na ions permeate the interlayer structure of LiFePO₄, enhancing the ion migration channels by increasing the ion transmission rate. A current rate of 2.5 mAh ensures >2000 charge/discharge cycles, while retaining a charge/discharge efficiency of 96% and a discharge capacity of 91.3 mAh g⁻¹. This manufacturing process can provide conformal power modules for a diverse range of portable devices with various shapes, improving space utilization.     

地表径流速度对城市内涝影响规律

为分析地表径流速度对城市内涝的影响,采用一维地下排水管网与二维城区地形的动态耦合模型,选取大连市某排水区块作为研究区域,设置4种地表径流速度10种设计降雨场景,模拟分析在不同重现期设计降雨及不同地表径流速度下研究区的内涝积水特性。结果表明:随着地表径流速度降低,管道排水压力变小,管道排水达标率最高可提升48.05%,且降雨重现期越短,地表径流流速对管道排水压力的削减效果越明显;地表径流流速对检查井溢流量影响显著,随着地表径流速度降低,检查井溢流量峰值最高可减小2 750 m~3,峰现时间最长可滞后56 min,同时随着降雨重现期增长,地表径流流速对检查井溢流量的削减效果减弱;研究区低、高风险区淹没面积随地表径流速度降低,最高可分别减小1.64万、8.37万m~2,但中风险区淹没面积变化反复。     

Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

基于分形理论的黄河内蒙古段河势演变特征及其与凌汛灾害关联研究

寒区河道凌汛灾害河势“弯道效应”的量化评估十分重要。基于分形理论提出河道横断面-纵剖面-平面多维度河势分形维数计算方法及其物理机制，并探讨黄河内蒙古段不同维度河势演变分形特征及其与凌汛灾害的关联关系。结果表明，黄河内蒙古段不同维度河势均具有多尺度自相似分形特征，且具有多年记忆周期的长程相关性；冰坝（严重性冰塞）发生频次与河道主槽弯曲分形维数呈正相关指数型函数关系，与河相系数、深泓点高程和河段平均底坡分形维数负相关，与水深-面积分形维数正相关，总体表明冰坝灾害更易发生于主槽偏移摆动大、蜿蜒曲折、河湾发育程度高的宽浅型弯曲河道，研究成果可为凌汛期冰塞冰坝灾害易发河段诊断及预测提供重要理论依据。     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

Cross-sector collaboration within Dutch flood risk governance: historical analysis of external triggers

ABSTRACT

This article synthesizes the literature on Dutch flood risk governance to analyze how external conditions shaped past and present dynamics of cross-sector collaboration for integrated flood risk management in the Netherlands. It traces the extent to which policy and legal frameworks, socio-economic circumstances, political realities, power relations and conflict situations have influenced attempts at collaboration between flood safety, spatial planning, environmental protection and other sectors. Despite the growing interdependences, existing power relations between the sectors are characterized by the dominance of the water sector. Hence, cross-sector collaboration can develop as long as it does not compromise flood safety.     

纳米TiO2流体表面改性及对真空闪蒸制冰的影响

利用电镜扫描法、紫外分光光度法及烘干称重法对纳米TiO₂流体的分散稳定性进行了综合评价，研究了表面活性剂种类及浓度对其分散稳定性的影响。将纳米TiO₂流体引入真空闪蒸制取冰浆系统，研究了纳米TiO₂浓度、表面活性剂浓度及对吸附作用下纳米TiO₂流体真空闪蒸制冰的影响。结果表明，表面活性剂类型对纳米TiO₂流体分散稳定性的影响很大，复合型的分散稳定性最佳，其次是阴离子型；纳米粒子及表面活性剂可以增强真空下纳米TiO₂流体的成核效果，增大含冰率，降低过冷度；表面活性剂浓度是影响真空闪蒸制冰系统压力及闪蒸率的重要因素，系统压力及闪蒸率均随着表面活性剂浓度的增大而增大；另外，确定了在吸附作用下真空闪蒸制冰系统中使用纳米TiO₂流体的最佳条件。在最佳条件下，含冰率为18.35%，过冷度为0.51℃，热导率为0.920W/(m·K)，对比蒸馏水有较大改善。吸附作用下真空闪蒸制冰可行性较高，制取冰浆效果优良。     

Scalable Yielding of Highly Stable Polyelectrolyte-Coated Copper Sulfide Nanoparticles by Flash Nanoprecipitation for Photothermal-Chemotherapeutics

Photothermal-chemotherapeutic nanoparticles (NPs) are attracting increasing attention and becoming more widely used for cancer therapy in the clinic due to their noninvasiveness, notable tissue penetration abilities, and low systemic adverse effects. However, functional ligands are conventionally modified onto photothermal NPs to well stabilize the inorganic particles suffering from complex chemical modifications, low productivity, and batch-to-batch inconsistencies, and thus significantly restricting their clinical applications. Herein, flash nanoprecipitation (FNP) is taken advantage of to afford rapid and uniform mixing for generating local supersaturated CuS clusters for small and highly stable CuS NPs effectively stabilized by polyacrylic acid through a continuous strategy. It greatly reduces the complexity for CuS NPs synthesis and functionalization in a facile intensified mixing process. These as-synthesized particles are high-drug loading, scalable, and most importantly, it is easy to control their sizes and charges through external conditions. Toxicity and tumor inhibition experiments confirm the high cell toxicity and good suppression of tumor growth under near-infrared irradiation indicating a promising prospect of FNP in the large-scale and continuous yielding of highly stable and high-performing photothermal-chemotherapeutic NPs for cancer therapy.     

淮河入江水道行洪能力分析

入江水道是淮河下游最大的泄洪河道,承担着淮河上中游70%以上的洪水泄入长江。根据1961—2018年大洪水期间的实测资料,利用水位流量法计算分析入江水道的泄洪能力和防洪能力。结果表明:因历史客观条件限制以及4个梯级控制河段整治的难度与复杂性,在不同时期各控制河段的行洪能力呈现各自不同的特点;经过多年持续有效治理,河道行洪能力整体得到提高;由近年来实测资料推算,各控制河段的行洪能力基本达到设计要求。对入江水道行洪能力的分析为淮河下游区的防汛抗洪和降低特大洪水威胁提供借鉴和参考,对区域经济社会又好又快发展具有现实意义。