广义正交码索引调制系统的性能分析

摘 要：为了提高码索引调制（code index modulation，CIM）系统的传输效率，提出了一种具有更低复杂度的单输入单输出（single input single output，SISO）的广义正交码索引调制（generalized orthogonal code index modulation，GQCIM）系统。CIM 系统使用扩频码和星座符号传输信息，但只能激活两个扩频码索引和一个调制符号。而 GQCIM 系统以一种新颖的方式克服了只激活一个调制符号的限制，同时充分利用了调制符号的正交性，增加扩频码索引以传输更多的额外信息位，提高了系统的传输效率。此外，分析了GQCIM系统的理论性能，推导了误码率性能的上界。通过蒙特卡罗仿真验证了GQCIM系统的性能，对比发现GQCIM系统的理论和仿真性能一致。而且在相同的传输效率下，结果显示GQCIM系统的性能优于同样具有正交性的调制系统，如广义码索引调制（generalized code index modulation，GCIM）系统、CIM系统、码索引调制-正交空间调制（code index modulation aided quadrature spatial modulation，CIM-QSM）系统、码索引调制-正交空间调制（code index modulation aided spatial modulation，CIM-SM）系统、脉冲索引调制（pulse index modulation，PIM）系统。     

以任意高维纠缠态为量子信道的受控隐形传态

目的是利用高维量子纠缠态为量子信道，讨论未知单粒子态的受控隐形传输问题。以三维量子纠缠态为信道，提出一个二维任意单粒子态的受控隐形传输协议。提出了以任意[d]-维量子纠缠态为量子信道，[t]-维任意单粒子态的隐形传输协议[(t相似文献   

小尺度交通信号灯的检测与状态识别

交通信号灯识别包括检测和状态识别，在智能交通系统中发挥重要作用。基于YOLOv3算法提出了一种交通信号灯检测与状态识别模型。针对交通信号灯相较于交通场景中其他目标具有尺度小的特性进行了算法的设计：降低骨干网络的下采样倍率以增加小尺度目标的特征描述能力；通过增大特征图的尺度来改进多尺度特征融合；引入广义交并比作为检测任务的损失函数来改进目标边界框的回归效果。同时，根据交通信号灯本身的特性，使用颜色和形状约束的方法对信号灯进行状态识别和类别验证。最后在公开的Bosch交通信号灯数据集上和实际的城区道路进行了实验验证。实验结果表明，所提出的算法能够提升交通信号灯识别的精度和召回率，识别准确率可以达到90%左右。     

动力蓄电池包挤压失效仿真与实验

为提高动力蓄电池包挤压仿真的精度，将延性损伤准则引入到有限元仿真，通过单轴拉伸试验、纯剪切试验与缺口件拉伸试验与有限元仿真，获得了某动力蓄电池包结构所用材料6061-T6铝合金的延性损伤参数。型材三点弯曲试验、动力蓄电池包挤压试验与有限元仿真的结果表明：输入延性损伤参数的有限元仿真结果与试验结果误差小，能较为准确地模拟铝合金损伤对结构承载性能的影响；不考虑材料失效的结果与试验结果误差较大。     

Recycled paperboard with a barrier layer for food contact: set-off during stacking or reeling. Analytical method and preliminary results

The use of recycled paperboard for packaging dry foods is in the interest of sustainability of resources, but in most applications, the food must be protected against contamination, such as by a functional barrier on the internal surface of the paperboard box. After application, the paperboard is usually stacked or reeled before making boxes. During this period, the food-contact surface of the barrier layer is in contact with the outer side of the paperboard, which may result in set-off and subsequent contamination of food. A method is described for the determination of this path of migration, based on the taped format also used for the measurement of the barrier efficiency. Recycled paperboard containing the three surrogate substances n-heptadecane, 4-methyl benzophenone and dipropyl phthalate was taped to the food-contact side of the barrier layer. Pressure onto the test packs did not seem to be a relevant parameter. After periods of interest, a piece of the paperboard with the barrier layer was extracted and analysed for the surrogate substances. Another piece may be brought into contact with silicone paper to simulate the transfer to food. After 2 weeks at 60°C (simulating about 1 year at 25°C), set-off and the transfer to the silicone paper exceeded 1% for all barrier materials tested, but after 6 weeks at 40°C (around half a year at 25°C), set-off remained below 1% for all barrier layers except a multilayer with polyethylene on the food-contact surface. The preliminary conclusion is that set-off should be taken seriously, but may be kept low enough to provide sufficient protection of the packed food.     

A stiffness parameter and truncation error criterion for adaptive path following in structural mechanics

We explore a truncation error criterion to steer adaptive step length refinement and coarsening in incremental-iterative path following procedures, applied to problems in large-deformation structural mechanics. Elaborating on ideas proposed by Bergan and collaborators in the 1970s, we first describe an easily computable scalar stiffness parameter whose sign and rate of change provide reliable information on the local behavior and complexity of the equilibrium path. We then derive a simple scaling law that adaptively adjusts the length of the next step based on the rate of change of the stiffness parameter at previous points on the path. We show that this scaling is equivalent to keeping a local truncation error constant in each step. We demonstrate with numerical examples that our adaptive method follows a path with a significantly reduced number of points compared to an analysis with uniform step length of the same fidelity level. A comparison with Abaqus illustrates that the truncation error criterion effectively concentrates points around the smallest-scale features of the path, which is generally not possible with automatic incrementation solely based on local convergence properties.     

纤维金属层板铆接剩余强度影响因素研究

为研究单搭铆接接头中纤维金属层板耦合损伤行为，运用金属硬化Johnson-Cook失效准则、纤维增强复合材料三维Hashin损伤准则、脱层B-K失效理论以及刚度退化失效准则建立了纤维金属层板铆接渐进失效模型，并结合实验验证了模型的合理性。考察了单搭铆接二次弯曲效应、层板铝合金体积分数、预紧力、层板孔边距对纤维金属层板铆接强度和失效模式的影响，为提高纤维金属层板铆接剩余强度提供可靠建议。分析结果表明：二次弯曲效应加速损伤发生，从而降低层板铆接强度，其中偏心加载可以削弱二次弯曲效应，更好地提高铆接强度；层板铝合金体积分数的增大能够提高层板铆接强度，但当体积分数大于50%时层板铆接比刚度和比强度反而下降；预紧力的增加能够提高层板铆接强度和增强层板损伤抗力；随着孔边距的递增，铆接剩余强度有所提高，破坏模式由灾难性拉断失效模式逐渐转化为理想的挤压失效模式，但当孔边距达到一定数值时，铆接强度不再明显提高，而失效模式也维持为挤压破坏。     

断裂准则对TC4钛合金板抗卵形头弹冲击的影响

为了解TC4钛合金的抗冲击力学性能，利用一级轻气炮进行了卵形头弹冲击TC4钛合金靶板的试验，撞击速度范围为125.9~240.0 m/s。通过撞击试验获得弹体的初始-剩余速度以及靶板的失效破坏模式，并利用公式拟合弹体初始-剩余速度得到弹道极限速度。利用ABAQUS/Explicit有限元软件建立弹体冲击靶体的三维模型，研究断裂准则对TC4钛合金板抗卵形头弹冲击性能的影响，分别采用不同断裂准则进行数值模拟，并将数值模拟预测结果与试验结果进行对比。研究结果表明，从弹道极限和失效破坏模式综合考虑，Hancock-Mackenzie (H-M) 准则预测的结果与试验结果更接近，说明考虑失效应变随应力三轴度的变化关系能提高数值仿真精度。     

基于双树复小波的无参考立体图像质量评价

随着3D技术的不断发展，立体图像的使用领域越来越广泛，同时人们对图像的清晰度要求越来越高，因此，立体图像的质量评价成为关注点，基于此，提出了一种基于双树复小波变换的立体图像质量评价算法。使用双树复小波变换对立体图像的左、右视图进行处理，生成纹理结构图像，且根据最小能量误差的原理，获取左右视图的视差图；对纹理结构图像和视差图提取非对称广义高斯分布模型的参数、梯度幅值、相对梯度方向方差和奇异值曲线与坐标轴的面积等特征；使用AdaBoosting BP神经网络，进行训练和预测立体图像的质量得分。在LIVE立体图像数据库上的实验结果表明，新方法预测得分与主观得分有较好的一致性，获得了比较好的实验结果。     

Actuator fault estimation based on generalized learning observer for quasi-linear parameter varying systems

This article presents a generalized learning observer (GLO) design for the simultaneous estimation of states and actuator faults for polytopic quasi-linear parameter varying systems. The proposed approach is based on the use of a GLO, which generalized the existing results on the proportional-integral observers. Conditions of existence and stability of the observer are given through the stability analysis in the sense of Lyapunov. Its design is obtained in terms of a set of linear matrix inequalities. The performance of the proposed method is evaluated by simulation in a one-link-flexible joint robot system.