工艺参数对动态流量控制法挤压弯管应力的影响

采用有限元模拟和实验研究了挤压钛合金弯曲管件。通过实验验证了工件的形状和尺寸精度,并通过有限元模拟分析了工艺参数对挤出过程中变形体的平均压应力分布情况和挤出弯管件的曲率半径的影响规律。结果表明:有限元模拟中,弯管件的曲率半径误差为6.03%,弯管直径误差为3.82%;在靠近定径带处,平均压应力呈非均匀分布;在焊合腔内,靠近细分流孔区域的平均压应力小于靠近粗分流孔区域的平均压应力,平均压应力的大小顺序在通过粗、细分流孔前后相反;在模具结构固定不变时,弯管件的曲率半径随挤压速度的减小而增大,不随挤压温度的变化而变化。     

梯度铝蜂窝夹芯板的力学行为

梯度分层铝合金蜂窝板是一种有效的吸能结构,本工作在梯度铝蜂窝结构的基础上根据梯度率的概念,通过改变蜂窝芯层的胞壁长度,设计了4种质量相同、梯度率不同的铝蜂窝夹芯结构。通过准静态压缩实验,并结合非线性有限元模拟准静态及冲击态下梯度铝蜂窝夹芯结构的变形情况及其力学性能,分析对比了相同质量下梯度铝蜂窝夹芯结构在准静态下的变形模式以及冲击载荷下分层均质蜂窝结构和不同梯度率的分层梯度蜂窝结构的动态响应和能量吸收特性。结果表明:在准静态压缩过程中,铝蜂窝梯度夹芯板的变形具有明显的局部化特征,蜂窝芯的变形为低密度优先变形直至密实,层级之间的密实化应变差随芯层密度的增大而逐渐减小;在高速冲击下,梯度蜂窝板并非严格按照准静态过程中逐级变形直至密实,而是在锤头冲击惯性及芯层密度的相互作用下整体发生的线弹性变形、弹性屈曲、塑性坍塌及密实化;另外,在本工作所设计的梯度率中,当梯度率为γ₁=0.0276时,梯度蜂窝夹芯板的吸能性达到最好,相较于同等质量下的均质蜂窝夹芯板,能量吸收提高了10.63%。     

Optimization of PEMFC system operating conditions based on neural network and PSO to achieve the best system performance

PEMFC system is a complex new clean power system. Based on MATLAB/Simulink, this paper develops a system-level dynamic model of PEMFC, including the gas supply system, hydrogen supply system, hydrothermal management system, and electric stack. The neural network fits the electric stack model to the simulation data. The effects of different operating conditions on the PEMFC stack power and system efficiency are analyzed. Combining the power of the reactor and the system efficiency to define the integrated performance index, the particle swarm optimization (PSO) algorithm is introduced to optimize the power density and system efficiency of the PEMFC with multiple objectives. The final optimal operating point increases the power density and system efficiency by 1.33% and 12.8%, respectively, which maximizes the output performance and reduces the parasitic power.     

长距离越野带式输送机静动态分析

针对长距离越野带式输送机运输线路复杂、输送带上物料分布不均匀等特点,利用 Belt Analyst 分析软件,建立了 5 种出现概率较高的工况模型,静态分析了这 5 种工况下带式输送机圆周驱动力、电动机轴功率、张紧力等参数的差异,确定了最恶劣工况。同时对带式输送机启动、停车和制动期间输送带关键点张力、滚筒合力、张紧小车位移和速度、驱动滚筒紧松边张力比等参数进行了动态分析,调整了最终滚筒合力参数。经过一年多时间的运行检验,该系统各项参数满足稳定运行要求,对长距离越野带式输送机设计具有一定的参考意义。     

A numerical study of dynamic behaviors of a unitized regenerative fuel cell during gas purging

The gas purging states affect electricity output and energy storage capacity of unitized regenerative fuel cells. In this study, a model of unitized regenerative fuel cell is established. Cell voltages and operating temperatures influences on the dynamic distribution of thermal fluid during purging process and the discharge of residual liquid water in electrolytic cell mode are investigated. The motivation of the present study is better understanding the gas purging characteristics and its effect on reaction behaviors of unitized regenerative fuel cells. Simulation results reveal a significant influence of purging gas temperature on the water flooding and a great effect of operating voltage on the water diffusion. The operating temperature of electrolytic cell model almost has little effect on purging results at different cell temperature and the same purging gas temperature. When the purging gas temperature is changed, higher temperatures of cell and purging gas facilitate liquid water discharging out from the cell regions. In cell water flooding situation, when having large liquid content, the purging gas has little effects on the water expelling process.     

Acid–base transport model depicting the dynamic pH response of interfacial reactions

Acid–base transport is integral to many important interfacial reactions in various fields of chemistry, but its theoretical foundation is lacked. Herein, a common acid–base transport model is established owing to the success in deriving buffer transport equations. This model is applicable to most buffer systems by flexibly integrating the transport equations in terms of buffer components, and is verified through the model relationships of buffer transport limiting current by using hydrogen evolution reaction experiments. Based on model calculations, two diagram approaches are proposed to depict the dynamic pH response and aid buffer operation optimizations. The model and methods allow us to quantify the rate-limiting effect of acid–base transport on interfacial reactions and to precisely control the effect through medium regulations. Furthermore, the model has laid the foundation of dynamic pH effect on species transformation and process mechanism, which can be of wide interest in the chemistry encompassing interfacial reactions.     

基于光谱尺度空间与管道滤波的红外目标检测

为了准确地从复杂干扰背景下检测出真实弱小目标，本文引入视觉显著性，设计了基于快速光谱尺度空间与动态管道滤波的红外目标检测算法。基于真实目标与背景内容之间的整体差异，引入快速光谱尺度空间与阈值分割技术，设计视觉显著性机制，对红外图像完成处理，输出全局显著性映射，以高效过滤干扰背景内容。考虑目标与背景的局部特征差异，构建自适应局部对比度增强机制，对粗检测结果实施处理，获取对应的局部显著性映射，改善视觉显著性区域内目标的对比度。引入高斯差分理论，通过估算每一帧红外图像中的目标像素直径，形成动态管道滤波，充分消除虚警，准确识别出弱小目标。多组实验数据显示：较已有的红外目标检测技术而言，在各种不同的复杂背景干扰下，所提算法呈现出更好的检测能力，拥有更理想的接收机工作特性ROC曲线。     

海河平原区地下水累计可恢复超采量评价

地下水累计可恢复超采量评价对于地下水超采态势评判和超采综合治理实施都具有重要意义。本文以海河平原区为研究对象，提出超采量评价方法，旨在客观准确评价地下水累计可恢复超采量。针对浅层地下水超采量，提出生态临界水位作为传统“水位动态法”评价浅层地下水超采量的临界水位，据此得到研究区1959-2019年累计浅层超采量为869亿m³；针对深层地下水超采量，提出“不可恢复超采量”评价指标，采用地面沉降体积法评价深层地下水超采量，根据地面沉降体积计算深层承压含水层系统压密释水量体积，据此估算1970-2019年深层累计超采量为756亿m³；通过建立的一维非线性压密释水数值模型，模拟了深层承压含水层系统压密释水过程，计算得到非弹性压密释水量，评估研究区累计不可恢复超采量为558亿m³。因此本文认为，自1960年代以来，海河平原区地下水浅层和深层累计超采量1625亿m³，其中可恢复的超采量仅为1067亿m³。该研究结果可为未来地下水回补水量和南水北调规划调水量的确定提供参考。     

Thermo-adjusted self-healing epoxy resins based on Diels–Alder dynamic chemical reaction

Micro-damage in materials could be repaired by endowing materials with self-healing performance. Herein, an epoxy resin with excellent self-healing performance grounded on thermo-reversible Diels–Alder dynamic chemical reaction was developed. Results showed that the bending strength and adhesive behavior of epoxy resin were influenced dramatically upon treatment with various temperatures. More importantly, damages created in epoxy resin could be repaired completely after suitable heat treatments. What is more, the healed epoxy resin exhibited much higher bending strength and adhesive performance than the pristine one did. The materials could be damaged and then repaired repeatedly. Meanwhile, the as-prepared self-healing epoxy resin exhibited excellent thermal reversibility and controllable adhesion. The thermo-adjusted self-healing performance endowed epoxy resin with recyclable and reusable performance. Therefore, the research made it possible of recycling waste epoxy resins.     

PTA装置醋酸脱水塔的动态模拟及控制策略分析

以PTA装置醋酸脱水塔为研究对象，在该醋酸脱水塔的稳态模型的基础上，通过建立的平衡级动态数学模型以及补充设置好的动态参数，利用Aspen Plus软件建立好动态模型。以Aspen Dynamics软件为工具，用回流流量控制灵敏板温度，塔釜再沸器热负荷与进料流量F ₁呈比例控制，模拟设计出了控制策略CS1。又为了保证在进料流量扰动时塔底醋酸浓度更加稳定，利用塔釜再沸器热负荷来控制塔釜醋酸浓度，设计出了控制策略CS2。将两种不同的控制策略对其动态响应进行分析比较，得出在相同目标条件下表现更优的控制策略，为实际生产和控制方案的设计提供方向和指导。