库车坳陷煤生物标志物组成随成熟度的变化特征

对塔里木盆地库车坳陷三叠系和侏罗系的11个岩心与露头煤样的地球化学分析表明，煤的生物标志物组成随演化程度的增加而有规律的变化：成熟早期（镜质组反射率Ro／1．0％）煤的生物标志物组成反映了沉积环境和生源的特征；成熟晚期（1．10％＜Ro＜1．30％）煤的生物标志物特征受成熟度的控制作用十分明显，生物标志物参数随Ro的增大而增加或减小；高－过成熟阶段（Ro＞1．30％)所有煤样的生物标志物组成已基本趋于一致，而且和湖相泥岩的生物标志物特征相似，该阶段的生物标志物参数不能用来进行油源对比。     

三塘湖盆地上古生界烃源岩镜质组反射率异常研究

镜质组反射率是评价有机质成熟度的重要指标 ,然而由于地质因素和测试技术的原因 ,镜质组反射率测量值常与预计值有一定的偏差。在三塘湖盆地上古生界烃源岩中 ,可以观察到镜质组反射率的局部增强和镜质组反射率的抑制。局部增强多分布在上二叠统的烃源岩中 ,主要与火山活动有关。这种反射率的增强在平面上分布广泛 ,但纵向上影响范围较小。反射率的抑制是在上古生界烃源岩含有较高含量的腐泥组分背景下产生的。用氢指数模板方法对抑制进行了校正 ,抑制的幅度最大可达 0 .3%     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

Effect of igneous activity on hydrocarbon source rocks in Jiyang sub-basin, eastern China

A 50 m thick diabase sill was found in the Paleogene black mudstone hydrocarbon source rocks in Xia38 well. Within heating aureola of the sill, optical changes of kerogen and signatures of extractable bitumens in the mudstones were investigated. Under effects of high heating rate associated with sill intrusion, the vitrinite reflectance (Ro) has an increasing tendency with decreasing distance to the sill both below and above the sill. However, only within a zone of about 15 m to the diabase sill, the vitrinite reflectance shows significant increase. Above the sill, the Ro values increase gradually from 0.6% to 1.0%, whereas below the sill, the Ro values increase dramatically from 0.8% to 3.8%. The contrasting Ro increasing patterns are attributed to the different heat transferring conditions, the relatively open system above the sill and the relatively close system below. The more mature signatures below the sill are also demonstrated by the n-alkane distribution, carbon predominance index and odd-to-even carbon number predominance of the extracted bitumens. Below the sill, the proportion of the saturated hydrocarbons in the extracted bitumens increases from 34% to 79% towards the sill contact. The bitumens in the two highest rank samples which are closest to the sill are dominated by saturated or saturated + aromatic hydrocarbons.The %20S, %αββ and %Ts biomarker parameters of the extracted bitumens are 46%, 58% and 54%, respectively, at Ro = 1.5%. At Ro = 2.6% or 3.0%, they reach to 52%, 71%, and 71%, respectively, still under or close to their corresponding equilibrium end-points. These samples of high rank, established on the basis of optical assessment (vitrinite reflectance), have less mature biomarker signatures. The remarkable disparities between optical and biomarker parameters can be ascribed to that the aromatization of kerogen to increase Ro was more favored than the isomerization of biomarker in the rapid heating scenario.     

Experiences in developing and applying a software engineering technology testbed

A major problem in empirical software engineering is to determine or ensure comparability across multiple sources of empirical data. This paper summarizes experiences in developing and applying a software engineering technology testbed. The testbed was designed to ensure comparability of empirical data used to evaluate alternative software engineering technologies, and to accelerate the technology maturation and transition into project use. The requirements for such software engineering technology testbeds include not only the specifications and code, but also the package of instrumentation, scenario drivers, seeded defects, experimentation guidelines, and comparative effort and defect data needed to facilitate technology evaluation experiments. The requirements and architecture to build a particular software engineering technology testbed to help NASA evaluate its investments in software dependability research and technology have been developed and applied to evaluate a wide range of technologies. The technologies evaluated came from the fields of architecture, testing, state-model checking, and operational envelopes. This paper will present for the first time the requirements and architecture of the software engineering technology testbed. The results of the technology evaluations will be analyzed from a point of view of how researchers benefitted from using the SETT. The researchers just reported how their technology performed in their original findings. The testbed evaluation showed (1) that certain technologies were complementary and cost-effective to apply; (2) that the testbed was cost-effective to use by researchers within a well-specified domain of applicability; (3) that collaboration in testbed use by researchers and the practitioners resulted comparable empirical data and in actions to accelerate technology maturity and transition into project use, as shown in the AcmeStudio evaluation; and (4) that the software engineering technology testbed’s requirements and architecture were suitable for evaluating technologies and accelerating their maturation and transition into project use.

Technology landscape and a short patentometric review for antibiofilm technologies

This study presents an overview and a short critical review of patented antibiofilm technologies. Patent information was used to determine scenarios that could be used by decision-makers or business intelligence. The study found that academia, mainly from the USA, has been applying for the most patents since 1997. Based on the S-curve analysis, the maturity of this technology sector is emerging. The technological specialization for the 10 most prominent patent applicants and state-of-the-art antibiofilm patents are presented.The high dispersion of patent applicants, the presence of universities among the most active patent applicants, and the content of the patents analyzed are good indicators to infer that developed technologies are close to the academic level. Moreover, many efforts are necessary to bring these technologies into the market.Polymers-N-based, amino acids and peptides, P and S compounds, chelating agents and organometallic complexes, nanoparticles, or composites are claimed to be active against biofilm formation. Such compounds are presented in this work, and in rare cases, they are described as compositions ready for use as marketable products.     

Impacts of essential elements of management on IT application maturity — A perspective from firms in China

This paper explores the impacts of essential elements of management on IT application maturity (ITAM). A game theoretical model is established to show that a firm's IT application maturity should match with its essential elements of management. In order to further validate the analytical result, a data set with 137 firms was collected via a survey instrument. Using reliability and factor analysis on the dataset, a four-dimension measurement construct of IT application maturity is proposed together with a three-dimension measurement construct of essential elements of management. Empirical analysis is then conducted to address research questions on the impacts of essential elements of management on IT application maturity. It is found that while a firm's strategic cooperation capability has no significant effect on IT application maturity, its internal coordination capability positively influences all four dimensions of IT application maturity. For the firm's execution capability, although it shows no significant effect on the overall IT application maturity, it does positively affect the technology and man-machine synergy dimensions of IT application maturity. The findings of this study offer practical guidance for organizations to better align their IT application maturity with essential elements of management.     

供应链知识管理能力成熟度评价研究

借鉴能力成熟度理论提出了供应链知识管理能力成熟度,并用其度量供应链知识管理水平。从供应链知识管理的基础设施支撑能力、组织结构支撑能力、企业文化支撑能力、知识获取能力、知识组织能力、知识转移能力和知识应用能力等7个方面出发,构建了供应链知识管理能力成熟度评价指标体系。基于语言评价信息的改进AHP—FUZZY方法对供应链知识管理能力成熟度进行评价,最后通过实例,说明该方法的有效性、实用性。     

智能电网IT能力成熟度模型及其模糊综合评价研究

运用模糊评价理论和方法,构建了基于模糊综合评价方法的智能电网IT能力评价模型．对西部某省电网公司进行IT能力评价,对结果进行探讨,指明企业IT能力所处的等级及IT能力改进的方向．所提供方法对智能电网企业实施IT能力建设具有重要参考价值．     

南通地区家纺企业电子商务成熟度研究——基于AHP模糊综合评价算法

提出了测评南通地区家纺企业电子商务成熟度的指标体系,该指标覆盖企业对电子商务的重视程度、电子商务运营、电子商务安全、电子商务效益4个维度的16个指标体系。基于AHP和模糊理论的综合评价算法,对各个层次的指标计算权重采用模糊法确定各个指标评价的数学模型,测评可得南通地区家纺企业电子商务成熟度为良好。最后根据测评结果给出了南通地区家纺企业提升电子商务成熟度的对策。