Organic mesh template-based laminated object manufacturing to fabricate ceramics with regular micron scaled pore structures

A new aqueous slurry-based laminated object manufacturing process for porous ceramics is proposed: firstly, an organic mesh sheet is pre-paved as a pore-forming template before slurry layer scraping; secondly, the 2D pattern is built with laser outline cutting of the dried mesh–ceramic composite layer; finally, the pore structure is formed after degreasing and sintering. Alumina parts with porosities of 51.5 %, round hole diameters of 80 ± 5 μm were fabricated using 70 wt. % solid content slurry and 100 mesh nylon net. Using an organic mesh as the framework and template not only reduces the risk of damage of the green body but also ensures the regularity, uniformity and connectivity of the micron scaled pore network. The layer-by-layer drying method avoids the delamination phenomenon and improves the paving density. The new method can realize the flexible design of the pore structure by using various organic mesh templates.     

Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

钢混结构大型厂房整体式爆破拆除

采用整体式控制爆破拆除方案对华电扬州电厂钢筋混凝土框-排架结构厂房进行了爆破拆除。爆破前,对汽机房、厂房外墙和楼梯进行了预处理。将厂房划分为3个爆区,采用非电多回路网格式爆破网路,依靠东侧锅炉房倒塌施加在西侧锅炉房上的倾覆力矩,有效地克服了西侧锅炉房向西倒的难题,可为同类工程提供一定的参考。     

基于光谱尺度空间与管道滤波的红外目标检测

为了准确地从复杂干扰背景下检测出真实弱小目标，本文引入视觉显著性，设计了基于快速光谱尺度空间与动态管道滤波的红外目标检测算法。基于真实目标与背景内容之间的整体差异，引入快速光谱尺度空间与阈值分割技术，设计视觉显著性机制，对红外图像完成处理，输出全局显著性映射，以高效过滤干扰背景内容。考虑目标与背景的局部特征差异，构建自适应局部对比度增强机制，对粗检测结果实施处理，获取对应的局部显著性映射，改善视觉显著性区域内目标的对比度。引入高斯差分理论，通过估算每一帧红外图像中的目标像素直径，形成动态管道滤波，充分消除虚警，准确识别出弱小目标。多组实验数据显示：较已有的红外目标检测技术而言，在各种不同的复杂背景干扰下，所提算法呈现出更好的检测能力，拥有更理想的接收机工作特性ROC曲线。     

Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

Ultrathin Dual‐Scale Nano‐ and Microporous Membranes for Vascular Transmigration Models

Selective cellular transmigration across the microvascular endothelium regulates innate and adaptive immune responses, stem cell localization, and cancer cell metastasis. Integration of traditional microporous membranes into microfluidic vascular models permits the rapid assay of transmigration events but suffers from poor reproduction of the cell permeable basement membrane. Current microporous membranes in these systems have large nonporous regions between micropores that inhibit cell communication and nutrient exchange on the basolateral surface reducing their physiological relevance. Here, the use of 100 nm thick continuously nanoporous silicon nitride membranes as a base substrate for lithographic fabrication of 3 µm pores is presented, resulting in a highly porous (≈30%), dual‐scale nano‐ and microporous membrane for use in an improved vascular transmigration model. Ultrathin membranes are patterned using a precision laser writer for cost‐effective, rapid micropore design iterations. The optically transparent dual‐scale membranes enable complete observation of leukocyte egress across a variety of pore densities. A maximal density of ≈14 micropores per cell is discovered beyond which cell–substrate interactions are compromised giving rise to endothelial cell losses under flow. Addition of a subluminal extracellular matrix rescues cell adhesion, allowing for the creation of shear‐primed endothelial barrier models on nearly 30% continuously porous substrates.     

Experimental determination of pesticide processing factors during extraction of seed oils

ABSTRACT

Processing Factors (PFs) reflect the concentration or dilution of pesticide residues resulting from food processing. PFs are key elements to demonstrate the compliance of processed foods with Maximum residue levels (MRLs) as set by Regulation 396/2005. While efforts have been made by the European Food Safety Authority (EFSA) and by national authorities to compile PFs from processing studies, such PFs are not available for all pesticides/processed product combinations. The EU vegetable oil and proteinmeal industry association (FEDIOL) has therefore developed a theoretical approach to approximate MRLs in crude vegetable oils and fats, based on the partition coefficient (log P_ow) of the pesticides and on the oil content of the raw materials. To substantiate this approach, a pilot-scale processing study was initiated with rapeseeds spiked with selected pesticides and the experimental PFs for these pesticides determined. The aims of this study were (i) to study the reliability of pilot-scale conditions for PF determination and (ii) to assess the experimental PFs obtained in comparison to the theoretical PFs proposed by FEDIOL. This study demonstrated that production yields obtained for crude oil and meal in this processing study are similar to those in industrial processes even if differences were observed in the individual production steps (mechanical or solvent extraction steps). The experimental PFs obtained confirmed that the chosen fat-soluble pesticides did concentrate in the oil fraction. For metalaxyl-M having a log P_ow lower than 3, a partitioning between the oil and the meal was observed, as expected. By comparing the experimental PFs and theoretical PFs, it can be concluded that the FEDIOL approach can be recommended as a suitable tool when PFs derived from specific processing studies are missing. Similar studies on pesticides with wider ranges of log P_ow are required in order to complete our conclusions on default PFs for vegetable oils.     

破囊壶菌发酵生产DHA的研究进展

二十二碳六烯酸（DHA）是一种非常重要的多不饱和脂肪酸，能参与人及动物体内多个生理过程。破囊壶菌具有生长迅速、细胞内DHA含量高的特点，是工业化生产DHA的潜力菌。本文主要介绍破囊壶菌DHA代谢通路、影响破囊壶菌生产DHA的因素以及破囊壶菌中试发酵的研究现状。首先，对破囊壶菌合成DHA的两个代谢途径，即脂肪酸合成酶（fatty acid synthesis pathway，FAS）途径和聚酮合酶（polyketide synthesis pathway，PKS）途径进行总结和描述；其次，对影响破囊壶菌发酵生产DHA的三个主要因素（碳氮源、溶氧和温度）进行综述；随后，阐述了破囊壶菌发酵生产DHA的中试放大工艺的研究现状；最后，提出破囊壶菌发酵生产DHA过程中存在的问题，并指出进一步分离获得优质的破囊壶菌菌株、对其代谢途径和关键酶的研究以及中试放大工艺的研究是下一步研究的重点。通过对上述一系列问题进行综述，旨在为利用破囊壶菌工业化生产DHA提供一定的参考。     

新型实用的动态轨道衡过渡装置

本文通过对GDK-800型不断轨无基坑动态轨道称重装置故障成因的探究,提出对其装置的引轨、防爬和过渡部分,进行优化改造的建议,并简介一种新型实用的过渡装置。     

氯化铵蒸发器结垢成分鉴别及原因分析

多效蒸发器结垢的问题常常发生,影响热效率和装置的正常运行。为明确导致蒸发器结垢的原因和成分,利用X射线衍射（XRD）、等离子发射光谱（ICP）、扫描电镜能谱（SEM-EDS）、偏光显微镜、拉曼光谱和离子色谱等分析测试技术,对浙江大洋生物科技集团股份有限公司的氯化铵多效蒸发器上的不明结垢物做了表征和分析。结果表明,该结垢物的主要成分为磷酸铁、氧化铝和有机物的混合物。探讨了发生上述结垢的原因,并提出相应的解决方案,减少了公司氯化铵蒸发器的结垢。