An adaptive sliding mode observer based near-optimal OER tracking control approach for PEMFC under dynamic operation condition

Tracking control of oxygen excess ratio (OER) is crucial for dynamic performance and operating efficiency of the proton exchange membrane fuel cell (PEMFC). OER tracking errors and overshoots under dynamic load limit the PEMFC output power performance, and also could lead oxygen starvation which seriously affect the life of PEMFC. To solve this problem, an adaptive sliding mode observer based near-optimal OER tracking control approach is proposed in this paper. According to real time load demand, a dynamic OER optimization strategy is designed to obtain an optimal OER. A nonlinear system model based near-optimal controller is designed to minimize the OER tracking error under variable operation condition of PEMFC. An adaptive sliding mode observer is utilized to estimate the uncertain parameters of the PEMFC air supply system and update parameters in near-optimal controller. The proposed control approach is implemented in OER tracking experiments based on air supply system of a 5 kW PEMFC test platform. The experiment results are analyzed and demonstrate the efficacy of the proposed control approach under load changes, external disturbances and parameter uncertainties of PEFMC system.     

Shared human–robot path following control of an unmanned ground vehicle

This paper considers the shared path following control of an unmanned ground vehicle by a single person. A passive measure of human intent is used to blend the human and machine inputs in a mixed initiative approach. The blending law is combined with saturated super-twisting sliding mode speed and heading controllers, so that exogenous disturbances can be counteracted via equivalent control. It is proven that when the proposed blending law is used, the combined control signals from both the human and automatic controller respect the actuator magnitude constraints of the machine. To demonstrate the approach, shared control experiments are performed using an unmanned ground vehicle, which follows a lawn mower pattern shaped path.     

Influence of geosynthetic reinforcement on the stability of an embankment with rigid columns embedded in an inclined underlying stratum

Incompressible dipping substrata are commonly encountered in engineering practice. Compared to horizontal underlying strata, the inclined underlying stratum increase the risk of collapse of embankments reinforced with columns because it weakens the restraint of the column base. The objective of this study is to investigate the effectiveness of geosynthetics on improving the embankment stability when the underlying stratum is inclined. The influence of geosynthetic tensile stiffness on the ultimate surcharge and failure mechanism is studied. A deep-seated failure with column tilting occurs when the geosynthetic tensile stiffness is low, whereas a lateral sliding occurs when the geosynthetic tensile stiffness is high. To illustrate the contribution of geosynthetics, the distribution of the lateral pressures acting on the columns is analyzed.     

基于多基表示的滑动窗口椭圆曲线多标量乘算法

标量乘运算从整体上决定了椭圆曲线密码体制的快速实现效率，在一些椭圆曲线公钥密码体制中需要计算多标量乘。多基数链的标量表示长度更短、非零比特数目更少，较好地适用于椭圆曲线标量乘的快速计算。为了提高椭圆曲线密码的效率，在已有的二进制域和素域的标量乘算法的基础上，结合滑动窗口技术、多基算法，提出新的更高效的多标量乘算法。实验结果表明，新算法与传统Shamir算法和交错NAF算法相比，其所需的运算量更少，能有效地提高椭圆曲线多标量乘算法的效率，使多标量乘的运算更高效。相比于其他算法，新算法的计算效率比已有的多标量乘算法提高了约7.9%~20.6%。     

Optimal interval type-2 fuzzy fractional order super twisting algorithm: A second order sliding mode controller for fully-actuated and under-actuated nonlinear systems

In this paper, a novel interval type-2 fuzzy fractional order super twisting algorithm (IT2FFOSTA) which is essentially a second order sliding mode controller is presented. The proposed IT2FFOSTA enhances fractional order super twisting algorithm (FOSTA) by taking advantage of an interval type-2 fuzzy fractional order sliding surface (IT2FFOSS) for some classes of fully-actuated and under-actuated nonlinear systems in presence of uncertainty. The FOSTA significantly reduces the amount of chattering and the IT2FFOSS results in decreasing the tracking error, control effort, and chattering level. In order to control under-actuated systems, a hierarchical sliding surface is employed. The multi-tracker optimization algorithm is utilized to adjust the controller’s parameters; this leads to an optimal performance for the IT2FFOSTA. To examine the performance of the IT2FFOSTA, some simulation and experimental tests on three examples of different classes of fully-actuated and under-actuated systems, including ball and plate, inverted pendulum, and ball and beam systems are carried out. The simulation and experimental results demonstrate the superiority of the IT2FFOSTA in reducing the amount of chattering, tracking error, and control effort compared to those of the other control methods.     

多约束下距离加权最优滑模末制导律

为解决多约束下制导炮弹的精确制导问题,采用带有相对距离权函数的最优滑模末制导律,将权函数引入到最优制导律中,通过改变制导炮弹的运动轨迹、运动时间,进而增强制导精度。针对单权函数难以同时满足制导精度与导引头视线角、过载等约束的问题,采用不同权函数的分段加权方法解决加权最优末制导引起的制导问题。结合滑模变结构控制理论,设计分段加权最优滑模末制导律,增强制导系统的抗干扰能力。仿真验证结果表明,该末制导律既能解决过载、导引头视线角、落角等多约束情况下的精确制导问题,同时又具有一定的鲁棒性。     

Generalised multivariable supertwisting algorithm

The purpose of this paper is to present an extension of the generalised supertwisting algorithm (STA) to the multivariable framework. We begin by introducing an algorithm that may be deemed as a linear, quasicontinuous, or discontinuous multivariable system, depending on the functions that define them. For the class represented by such an algorithm we prove the robust, Lyapunov stability of the origin and characterise the perturbations that preserve its stability. In particular, when its vector field is discontinuous or quasicontinuous our algorithm is endowed with finite‐time stability. Due to its resemblance to the scalar case, we denote such finite‐time stable systems as generalised multivariable STA. Furthermore, the class of finite‐time stable systems comprise the currently available versions of STAs. To finalise, by means of simulation examples, we show that our proposed finite‐time stable algorithms are well suited for signals online differentiation and highlight their dynamical traits.     

冠状动脉系统的微分积分终端滑模混沌抑制

冠状动脉系统的混沌现象会导致严重的健康问题。以非线性冠状动脉系统为研究对象，建立了不确定性冠状动脉系统动力学模型，提出了不确定性冠状动脉系统的微分积分终端滑模混沌抑制方法，针对该模型的不确定性设计了扰动观测器，根据Lyapunov理论证明了所设计控制系统的稳定性，通过仿真实验验证了所提出的混沌抑制方法的有效性和可行性。     

表面织构形状对牙轮钻头轴承摩擦学性能影响的实验研究

牙轮钻头滑动轴承作为钻头破岩过程中传递载荷的关键部件,在低速重载的钻井过程中易发生黏着磨损失效。为改善牙轮钻头滑动轴承的耐磨性能,利用纳秒激光雕刻技术,在牙轮钻头滑动轴承轴颈表面加工了面积比为10%、深度为20μm的圆形、矩形、三角形及复合织构;基于赫兹相似理论,设计近似模拟钻头轴承工况的环-块配对副单元实验方案,并在UMT摩擦试验机上开展织构形状对钻头滑动轴承摩擦副摩擦因数、磨损量、温升变化和微观形貌影响规律的实验研究。结果表明:仿生织构的形状及布置方式对减摩和耐磨效果影响极大,其中圆形、矩形织构的减摩和耐磨性能最优,其次为三角形织构,而复合织构反而增大了摩擦因数及磨损量;单一织构对试件磨损量及温升的影响不大,而复合织构在增加摩擦的同时温度有明显升高,不利于井下高温环境下延长牙轮钻头寿命。     

基于背压和最佳阀位控制的滑压曲线实时优化及应用

针对目前凝汽器背压对滑压值的修正无普适算式可供遵循的问题，通过作图法推理获得了滑压设定值与凝汽器背压及机组负荷之间的二元函数表达式；利用流量变工况计算方法解决最佳综合阀位的确定问题，在满足机组日常运行需求的条件下达到汽轮机高压调阀节流损失最小化；将提出的基于凝汽器背压和机组负荷的二元函数滑压实时优化和基于流量变工况计算的最佳综合阀位控制滑压实时优化方法相结合，将凝汽器背压对滑压值的修正作为粗调，将最佳综合阀位控制对滑压值的修正作为细调，共同实现对滑压设定值的实时调整。在某660 MW超临界机组上的应用表明，该方法能够节约供电煤耗约1.12 g/(kW·h）。