不同盐沼湿地类型脱氮除磷效能及影响因素分析

采用沉水植物表面流湿地(沉水组)、挺水植物表面流湿地(挺水组)和浮床湿地(浮床组)3种盐沼湿地对长江口近岸低污染水体进行脱氮除磷效能的研究。结果表明,HRT为3 d时,水组、挺水组、浮床组对NO3^--N的去除率在高温时段分别为79.9%±13.2%、71.8%±15.2%、77.2%±13.2%,中温时段分别为39.4%±13.7%、31.5%±8.5%、18.4%±16.6%,低温时段分别为15.6%±14.6%、19.7%±8.6%、2.%5±8.6%。沉水组和挺水组对TP的去除率受温度影响较小,分别为66.4%±32.4%、55.5%±29.4%;而浮床组除磷效果受温度影响较大。当HRT缩短为1.5 d时,3组湿地系统在高温时段仍可达到相近的脱氮除磷效果,在中低温时段脱氮除磷效果都有不同程度的下降。     

Facile synthesis of black phosphorus directly grown on carbon paper as an efficient OER Electrocatalyst: Role of Interfacial charge transfer and induced local charge distribution

Black phosphorus (BP), as a new 2D material, is normally synthesized by a high-pressure and high-temperature (HPHT) method from white and red phosphorus, which severely hinders the further development of BP for any potential applications and leads to search for other potential applications of BP with big challenge. Herein, we develop a facile and efficient Thermal-Vaporization-Transformation (TVT) approach to prepare a highly active BP directly grown on carbon paper as the electrode for Oxygen evolution reaction (OER), showing a low onset potential of 1.45 V versus RHE. Simultaneously, the current density of BP-CP illustrates the excellent electro-catalysis stability only decreases by 3.4% after continuous operation for 10000 s. Meanwhile, the density functional theory (DFT) calculations further illustrates the P-doped carbon layer in the upper side of BP layer is actually responsible for its enhanced OER property, and the adjacent carbon atoms of the embedded P atoms are actually the active sites due to the induced local change distribution by intramolecular change transfer. Considering the facile, but efficient and scalable, TVT approach can directly synthesize BP-CP with excellent OER performance, which is promising for BP electrocatalysts used for OER in metal-air batteries, fuel cells, water-splitting devices, even other key renewable energy.     

Eco-friendly and degradable red phosphorus nanoparticles for rapid microbial sterilization under visible light

Pathogens pose a serious challenge to environmental sanitation and a threat to public health.The frequent use of chemicals for sterilization in recent years has not only caused secondary damage to the environment but also increased pathogen resistance to drugs,which further threatens public health.To address this issue,the use of non-chemical antibacterial means has become a new trend for environmental disinfection.In this study,we developed red phosphorus nanoparticles(RPNPs),a safe and degradable photosensitive material with good photocatalytic and photothermal properties.The red phosphorus nanoparticles were prepared using a template method and ultrasonication.Under the irradiation of simulated sunlight for 20 min,the RPNPs exhibited an efficiency of 99.98%in killing Staphylococcus aureus due to their excellent photocatalytic and photothermal abilities.Transmission electron microscopy and ultraviolet–visible spectroscopy revealed that the RPNPs exhibited degradability within eight weeks.Both the RPNPs and their degradation products were nontoxic to fibroblast cells.Therefore,such RPNPs are expected to be used as a new type of low-cost,efficient,degradable,biocompatible,and eco-friendly photosensitive material for environmental disinfection.     

Black phosphorous nanosheets–gold nanoparticles–cisplatin for photothermal/photodynamic treatment of oral squamous cell carcinoma

To improve five-year survival rate of oral squamous cell carcinoma (OSCC), the development of a novel composite material of black phosphorus nanosheets (BPNSs) and gold nanoparticles (AuNPs) for tumor treatment was carried out. The purpose of this study is to evaluate the cytostatic effects of BPNSs, AuNPs loaded with cisplatin (CDDP) on human tongue squamous cell carcinoma cells lines (SCC-9), and 7,12-dimethylbenz anthracene induced cheek squamous cell carcinoma was validated in golden hamsters animal models. The results showed that BPNSs could efficiently inhibit the metastasis and growth of OSCC compared with CDDP and AuNPs. And a combination composite of AuNPs–BPNSs loaded with CDDP could more effectively inhibit the metastasis and growth of OSCC, which might be due to the high drug-loading capacity, excellent photothermal properties and the combination of photodynamic and photothermal therapy of BPNSs and AuNPs, as well as the synergistic effects of AuNPs, BPNSs and CDDP.     

线性富磷化阻燃剂在聚氨酯泡沫中的应用研究

通过界面聚合法合成了一种线性富磷化阻燃剂（LPRFR），将LPRFR与可膨胀石墨（EG）复配制备了阻燃聚氨酯泡沫（RPUF），使用红外光谱分析仪、核磁共振分析仪对阻燃剂LPRFR的化学结构进行了表征，并通过极限氧指数仪、锥形量热仪、扫描电子显微镜和红外光谱分析仪对RPUF的燃烧性能、微观形貌和化学结构进行了分析。结果表明，仅10 %（质量分数，下同）的LPRFR 与8 %EG复配后，RPUF的极限氧指数（LOI）便达到26.1 %；LPRFR和EG能大幅降低RPUF的热释放速率，并提高基体的成炭能力； LPRFR参与了燃烧过程中的成炭反应，形成了含P—O—C及P=O结构的高质量炭层，有效隔绝了氧气和热量；LPRFR是一种对于聚氨酯泡沫阻燃性能优异的新型阻燃剂。     

前置除磷优化及对多级缺氧一好氧工艺的影响

为强化厌氧-多级缺氧-好氧(A-MAO)工艺,满足GB 3838-2002的地表IV水体要求,本研究对FeCl3、Fe2(SO4)3和聚合硫酸铁(PFS)3种铁盐前置化学除磷对TP、COD的去除效果和产泥量进行研究,并考察了前置化学除磷与A-MAO工艺耦合投加量。结果表明,FeCl3和Fe2(SO4)3对TP和SS去除可达到地表IV水体要求,并明显好于PFS;FeCl3对COD的去除和产泥量最多;与FeCl3相比,Fe2(SO4)3具有较好的COD保存能力,且产泥量少。AMAO工艺使用Fe2(SO4)3前置化学除磷,导致TN含量不达GB 18918-2002要求,优化的化学生物除磷耦合投加量为130 mg/L。     

微波消解-分光光度法测定乳清蛋白营养强化粉中磷的含量

目的 建立微波消解、紫外分光光度度法测定乳清蛋白营养强化配方粉中磷的含量。方法 称取适量的乳清蛋白营养强化配方粉,加入硝酸与石墨消解仪中预消解,待冷却后加入30%过氧化氢使用微波消解仪消解,样品经过赶酸,转移至容量瓶中并定容至刻度,在稀释液中加入钒钼酸铵试剂后使用紫外可见分光光度计进行检测。结果 磷在浓度2-15μg/mL之间呈现良好的线性关系, r_²=0.9997, 平均回收率为98.8%, 相对标准偏差为2.0%。结论 该方法操作简便、准确、安全、重现性好, 能准确测定磷含量, 可在实验室推广。     

Rapid fabrication and phase transition of Nd and Ce co-doped Gd2Zr2O7 ceramics by SPS

A series of Nd and Ce co-doped Gd_2-xNd_xZr_2-yCe_yO₇ (0.0 ≤ x, y ≤ 2.0) ceramics were rapidly fabricated through spark plasma sintering (SPS) within 3?min. The effects of Nd and Ce contents on the phase composition, lattice parameter, active modes, microtopography and microstructure have been investigated in detail. XRD studies reveal that the compositions corresponding to 0.0 ≤ y ≤ 1.0 show a single phase and beyond 1.0 exhibit multiphase. The lattice parameters increase with elevated Nd and Ce content. The grains are densely packed on each other with cube-like shape, and the elements are almost homogeneously distributed in the compound. This synthetic method provides a simple pathway for the preparation of highly densified single phase ceramic at 1600–1700 ℃ for 3?min under pressure of 80?MPa.     

Sodium storage properties of thin phosphorus-doped graphene layers developed on the surface of nanodiamonds under hot pressing conditions

Abstract

Phosphorus-doped graphene layers have been formed on the surface of nanodiamond (ND) particles by hot pressing of a mixture of purified detonation ND powder and triphenylphosphine (TPP) at 1000?°C and 100?bar. X-ray photoelectron spectroscopy detected about 1.7 at.% of phosphorus in the product, most of which was in the oxidized form. The same treatment conditions of the ND powder without the addition of TPP resulted in the only partial covering of some ND particles by sp²-hybridized carbon layers. The tests in Na-ion half-cells found that the pure carbon sample can reversibly sustain 42 mAh g^?1 at a current density of 0.1?A g^?1. For the phosphorus-doped sample, this value increases up to 54 mAh g^?1 due to mainly accumulation of sodium at various defects created in the graphitic layers as a result of phosphorus incorporation. Taking into account inertness of inner diamond cores, specific capacity values are 417 mAh g^?1 for phosphorus-doped graphene layers and 587 mAh g^?1 for non-doped ones.