不同进水流速对泵站进水池漩涡的影响

为探究泵站进水流速大小与泵站进水池水流流态、漩涡的产生与发展变化规律,结合泵站实际运行情况,建立引渠、前池、进水池和进水管的泵站物理模型和湍流数学模型,采用VOF模型和非定常的SST k-ω湍流模型对9种不同流速的泵站进水水流特性进行数值模拟,分析不同进水流速的泵站进水池水流流场分布、漩涡涡量的变化及分布规律。研究结果表明:当进水流速为0.322 2～0.564 2 m/s时,泵站表面漩涡的强度随进水流速的增大而增强:当进水流速为0.322 2～0.401 6 m/s时,进水池出现Ⅲ、Ⅳ型漩涡;当进水流速为0.483 5 m/s时,进水池出现Ⅴ型漩涡;当进水流速为0.520 8～0.564 2 m/s时,进水池出现Ⅵ型漩涡。将数值计算结果与模型试验结果进行对比,两者基本吻合。研究结果可为泵站工程设计提供参考。     

Predictive process mapping for laser powder bed fusion: A review of existing analytical solutions

One of the main challenges in the laser powder bed fusion (LPBF) process is making dense and defect-free components. These porosity defects are dependent upon the melt pool geometry and the processing conditions. Power-velocity (PV) processing maps can aid in visualizing the effects of LPBF processing variables and mapping different defect regimes such as lack-of-fusion, under-melting, balling, and keyholing. This work presents an assessment of existing analytical equations and models that provide an estimate of the melt pool geometry as a function of material properties. The melt pool equations are then combined with defect criteria to provide a quick approximation of the PV processing maps for a variety of materials. Finally, the predictions of these processing maps are compared with experimental data from the literature. The predictive processing maps can be computed quickly and can be coupled with dimensionless numbers and high-throughput (HT) experiments for validation. The present work provides a boundary framework for designing the optimal processing parameters for new metals and alloys based on existing analytical solutions.     

Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

石墨烯纳米制冷剂核态池沸腾换热的实验研究

为分析单层石墨烯纳米片对核态池沸腾换热的影响机理，对基液为R141b、分散相为单层石墨烯纳米片的纳米制冷剂的核态池沸腾换热特征进行了测定，采用Hot Disk热物性分析仪和铂金板法分别测定了石墨烯纳米制冷剂的热导率和表面张力，采用接触角测量仪和扫描电子显微镜（SEM）观测了沸腾后加热表面的润湿性和形貌特征。实验中，单层石墨烯纳米片的质量百分含量（ω）为0.02%~0.50%，实验压力为一个标准大气压，热流密度为20~200 kW/m2。实验结果表明：单层石墨烯纳米片的加入，使制冷剂R141b的核态池沸腾换热得到强化；当ω=0.2%时，换热系数提高比例出现峰值，为57.7%。伴随ω的增加，石墨烯纳米制冷剂的热导率增大、表面张力减小，沸腾表面润湿性增强且微腔数先增后减，综合作用的结果导致存在一个最佳的单层石墨烯纳米片浓度（即ω=0.2%）使换热系数最高。     

大跨度先张法预应力混凝土双T板的生产

大跨度先张法预应力混凝土双T板具有跨度大、结构性能好、成本低、整体性好等特点,被广泛应用于工业建筑。结合实际工程,介绍了大跨度双T板的生产工艺,并重点阐述了钢绞线张拉、预应力控制、混凝土浇筑和养护工艺,可为大跨度双T板的生产应用提供参考。     

薄板坯连铸连轧流程专利分析

以Orbit专利分析平台为主要研究工具，从专利文献中抽取专利数量指标和专利质量指标来构建评价薄板坯连铸连轧技术竞争力和企业创新能力的指标体系，结合其他文献研究的成果，从产业发展的实际出发做出分析，系统揭示了自薄板坯连铸连轧技术开发以来的技术进步、专利布局、发展演化、国内外发展现状、技术竞争实力等，有助于在专利文献提供的线索启发下开发新产品、新技术，从而有效提高研发效率。     

吹氩流量对结晶器流场影响的插钉工业试验

 结晶器吹氩流量对流场分布有明显影响，因此明确吹氩流量对结晶器内流场分布的影响规律对提高铸坯质量有重要意义。通过插钉法工业试验研究了吹氩流量对结晶器内流场分布的影响，并且定量分析了液位波动的变化。结果表明，随着吹氩流量的增大，流场形态从双环流逐步转变为复杂流和单环流。结晶器内流场形态从双环流转变为复杂流和单环流的过程中，水口附近速度逐渐增大，液位逐渐升高，弯月面速度分布逐渐转变为从水口流向窄面，液位波动也相应增大。因此，生产过程中应选择合适的吹氩流量，避免产生复杂流和单环流，以提高铸坯质量。     

基于径流污染控制目标为目的的分流制初期雨水调蓄池容积确定

鉴于初期雨水污染为地表水体的主要污染源之一,以儒乐湖初期雨水调蓄池容积确定为例,采用调蓄池工程措施进行截流,以V类水体标准为径流污染控制目标,在《室外排水设计规范》中控制径流污染的分流制初期雨水调蓄池计算公式的基础上,应用模型法模拟得出控制目标下的初期雨水径流累积深度及调蓄池容积。结果表明,截留径流累积深度为7mm,初期雨水调蓄池容积分别为9 250、5 850m^3时,研究区域内能够满足在管网重现期下排水水质达到V类水体标准。研究成果可为初期雨水截流工程实施提供建议及参考。     

Assessment of chemical and microbiological parameters of indoor swimming pool atmosphere using multiple comparisons

The aim of this study was to evaluate the air quality of an indoor swimming pool, analyzing diurnal and seasonal variations in microbiological counts and chemical parameters. The results indicated that yeast and bacteria counts, as well as carbon dioxide (CO₂), nitrogen oxides (NO_x) and O₃ concentrations, showed significant diurnal difference. On the other hand, temperature, relative humidity (R.H.), yeast counts and concentrations of CO₂, particles, O₃, toluene, and benzene showed seasonal differences. In addition, the relationship between indoor and outdoor air and the degree of correlation between the different parameters have been calculated, suggesting that CO₂, fine particles and NO_x would have indoor origin due to the human activity and secondary reactions favored by the chemical and environmental conditions of the swimming pool; while O₃, benzene and toluene, would come from outside, mainly. The overall results indicated that indoor air quality (IAQ) in the swimming pool building was deficient by the high levels of CO₂ and microorganisms, low temperatures, and high R.H., because frequently the limits established by the legislation were exceeded. This fact could be due to the poor ventilation and the inadequate operation of heating, ventilation, and air‐conditioning systems.