基准平面垂直断面法在爆破漏斗试验中的应用

系统阐述了基准平面垂直断面法在爆破漏斗试验中测量爆破漏斗体积的基本原理,并将隧道激光断面仪应用于金厂河矿1 750 m水平15^#采场底部切割巷道爆破漏斗试验爆破漏斗体积测量中。通过与传统体重法等计算法所得漏斗体积分析比较,结果表明基于隧道激光断面仪与3D Mine软件分析的基准平面垂直断面法实用性强、操作方便、结果直观可靠,达到试验预期目的。     

基于虚拟元-有限元耦合的隧道内道床干缩裂缝细观研究

为解释道床与盾构隧道管片产生脱空的现象，研究新混凝土在浇筑后由干燥收缩产生的裂缝机理。基于虚拟元推导任意多边形骨料的刚度矩阵格式，利用UEL子程序实现有限元与虚拟元的耦合计算，纯弯梁数值试验结果表明耦合法较有限元法计算效率明显提升，且具有较好的稳定性。在此基础上，建立细观尺度下新老混凝土的干缩数值模型，并通过圆盘干缩模型验证了模型参数。研究骨料和砂浆的应力分布、内部湿度与裂缝发展的对应关系以及新老混凝土表面和界面的应力发展。结果表明：①收缩过程中，骨料主要承受压应力作用，砂浆沿骨料边界的切线方向受骨料约束作用易形成收缩裂缝，在新混凝土表面首先出现大量微小裂缝，随后界面两端发生剥离; ②受表面下骨料的约束作用，新混凝土表面拉应力呈现“驼峰”分布。开裂后表面被划分为多个收缩区，收缩区边界受拉应力，内部受压应力；③界面的拉伸和剪切应力由两侧开始增加，并且随着界面剥离的增加不断内移。在界面内部未剥离区域内存在由界面附近骨料约束导致的局部压应力和剪切应力增大。     

Experimental study on mitigating wind erosion of calcareous desert sand using spray method for microbially induced calcium carbonate precipitation

Wind erosion is one of the significant natural calamities worldwide, which degrades around one-third of global land. The eroded and suspended soil particles in the environment may cause health hazards, i.e. allergies and respiratory diseases, due to the presence of harmful contaminants, bacteria, and pollens. The present study evaluates the feasibility of microbially induced calcium carbonate precipitation (MICP) technique to mitigate wind-induced erosion of calcareous desert sand (Thar desert of Rajasthan province in India). The temperature during biotreatment was kept at 36 °C to stimulate the average temperature of the Thar desert. The spray method was used for bioaugmentation of Sporosarcina (S.) pasteurii and further treatment using chemical solutions. The chemical solution of 0.25 pore volume was sprayed continuously up to 5 d, 10 d, 15 d, and 20 d, using two different concentration ratios of urea and calcium chloride dihydrate viz 2:1 and 1:1. The biotreated samples were subjected to erosion testing (in the wind tunnel) at different wind speeds of 10 m/s, 20 m/s, and 30 m/s. The unconfined compressive strength of the biocemented crust was measured using a pocket penetrometer. The variation in calcite precipitation and microstructure (including the presence of crystalline minerals) of untreated as well as biotreated sand samples were determined through calcimeter, scanning electron microscope (SEM), and energy-dispersive X-ray spectroscope (EDX). The results demonstrated that the erosion of untreated sand increases with an increase in wind speeds. When compared to untreated sand, a lower erosion was observed in all biocemented sand samples, irrespective of treatment condition and wind speed. It was observed that the sample treated with 1:1 cementation solution for up to 5 d, was found to effectively resist erosion at a wind speed of 10 m/s. Moreover, a significant erosion resistance was ascertained in 15 d and 20 d treated samples at higher wind speeds. The calcite content percentage, thickness of crust, bulk density, and surface strength of biocemented sand were enhanced with the increase in treatment duration. The 1:1 concentration ratio of cementation solution was found effective in improving crust thickness and surface strength as compared to 2:1 concentration ratio of cementation solution. The calcite crystals formation was observed in SEM analysis and calcium peaks were observed in EDX analysis for biotreated sand.     

Study on the difference of dispersion behavior between hydrogen and methane in utility tunnel

Compared to liquid/gas hydrogen tank, the pipeline is an economical way for hydrogen transportation. With the quick development of utility tunnel in China, hydrogen pipeline enters the gas compartment can be expected soon. However, all the safety requirements of the gas compartment in the current standards are designed for natural gas, and the applicability for hydrogen is unknown. Therefore, a series of studies were started to investigate the safety of hydrogen in utility tunnel. In this work, a real utility tunnel locates at Shanghai was selected as the physical object. A 3D numerical model was built and successfully validated by a scaled tunnel test. The model has the maximum deviation of +9.5%. After that, a comparatively study of the dispersion behavior of CH₄ and H₂ was conducted. The assumed scenario was a 20 mm small-hole leaks with gauge pressure of 1.0 MPa in the middle of the tunnel. Numerical results shown that, H₂ has a larger dispersion velocity and higher concentration, and is more dangerous compared to CH₄. The current emergency ventilation strategy of air change rate of 12 times/h is not effective enough to dilute the H₂ flammable cloud. The alarm time of the testing points shown strong linear law. There was a sharp variation in the range of 20%–100% LFL (Lower Flammable Limit), so the alarm strategy in the tunnel standards is too ideal for both CH₄ and H₂. The numerical results in the present study could provide a guidance for the design and safety management of the hydrogen tunnel.     

Effect of baking in different ovens on the quality and structural characteristics of saltine crackers

The aim of the study was to evaluate the physical and microstructural characteristics of crackers baked in four different industrial baking ovens (indirect radiation-cyclotherm, indirect convection, hybrid and industrial tunnel-ITO). Indirect convection and cyclotherm ovens provide the highest (5685.43 ± 51 W m⁻²) and the lowest (4860 ± 38.87 W m⁻²) amount of heat flux, respectively. Despite the amount of heat flux, indirect convection led to crackers with the highest moisture (7.86% vs. 4.82% in clyclotherm) and specific volume, but the lowest hardness. Cyclotherm resulted in crackers with lower specific volume, surface area, porosity, smooth and regular surface. Conversely, the hybrid and ITO ovens showed closer heat flux, leading to crackers with similar moisture content, texture parameters, specific volume, browning and inner porosity. Overall results show the potential of baking using different ovens for modifying the quality parameters of the crackers.     

Flow conditioning system for tri-sonic high pressure aerothermal testing

Blowdown testing offers a cost-effective experimental tool to replicate the aerothermal conditions in numerous high speed systems. The wind tunnel must replicate the inlet operating conditions, while the spatial and time dependent inlet flow conditions should be assessed carefully. This paper provides a design methodology and rules that ensure adequate flow conditioning in high inlet pressure wind tunnels suitable for subsonic and supersonic operation with mass-flow limits ranging from 1 kg/s to 25 kg/s, Reynolds numbers from 10³ (1/m) to 4x10⁷ (1/m), and Mach numbers from 0.01 up to 6. The quality of the proposed flow conditioning system was evaluated using stereo PIV measurements combined with hotwire, Pitot probe, and total flow temperature traverses.     

小孔间距布局对厢体气膜减阻效果的影响

为研究小孔间距布局对厢体气膜减阻效果的影响,通过优化厢体模型结构设计一种被动式气膜发生器,在渗流小孔直径1 mm、小孔与厢体表面倾斜度90°不变的情况下,通过模拟风洞实验测试厢体表面有渗流和无渗流喷出时小孔纵向间距为1.1～3 mm和小孔横向间距为1.1～5 mm的厢体模型所受到的总阻力。结果表明:小孔纵向间距的变化对厢体表面气膜减阻效果的影响很小;随着小孔横向间距的增加,厢体表面气膜减阻效果先增大后减小,且在小孔横向间距1.1～3 mm范围内减阻效果最佳;在主流速度和渗流速度比值相等的情况下,气膜减阻效果随着主流速度和渗流速度的增大而减小。     

多运营商高铁隧道移动网络覆盖方案

高铁移动网络覆盖是国内三大通信运营商的一个重点,而高铁隧道内移动网络覆盖更是运营商的一大难点痛点。文章根据我国中部省份某高铁线路覆盖规划实例,采用“设备+POI+泄漏电缆”模式,即三家运营商信号源设备通过同一POI(point of interface,多系统接入平台)接入,信号输出到泄漏电缆进行隧道覆盖,隧道口场坪站安装宽频切换天线对隧道外进行延伸覆盖,通过链路预算合理布置各运营商主设备信号源,从而实现隧道到室外的无缝覆盖。最后,根据已有成熟网络覆盖解决方案,对未来5G高铁隧道移动网络覆盖方案进行了探讨。     

基于EFEN-SP3方法的pin-by-pin中子动力学计算方法研究

为能直接给出安全分析所需的最热棒功率而不引入组件均匀化近似和精细功率重构近似，本文研究了基于栅元均匀化的pin-by-pin中子动力学计算方法。通过全隐式向后差分对多群时空中子动力学方程组的时间变量进行离散，采用指数函数展开节块-SP₃（EFEN-SP₃）方法求解含裂变介质的多群中子固定源方程组，通过高阶源展开技术消除了中子源分布与缓发中子先驱核分布形状不一致的问题。采用Ks因子、LW外推和粗网再平衡等加速技术提高计算效率。三维pin-by-pin中子动力学问题的数值结果表明：pin-by-pin中子动力学计算能直接给出单棒功率密度分布；高阶源展开技术可有效抑制计算偏差随时间步的累加效应；加速技术可将SP₃动力学计算的求解速度提高134.9倍。     

矿井地面风硐的改造方案比选与施工

为解决通风系统改造后原地面风硐断面偏小、风速超限的问题,通过在原有地面风硐东侧并联一道钢制矩形通风管道的方法,从而增加风硐断面积,降低风硐内的风速和通风阻力,效果明显。