Farmers' preferences for adopting on-farm concentration of raw milk: Results from a discrete choice experiment in Germany

Milk concentrates are used in the manufacturing of dairy products such as yogurt and cheese or are processed into milk powder. Processes for the nonthermal separation of water and valuable milk ingredients are becoming increasingly widespread at farm level. The technical barriers to using farm-manufactured milk concentrate in dairies are minimal, hence the suspicion that the practice of on-farm raw milk concentration is still fairly uncommon for economic reasons. This study, therefore, set out to investigate farmers' potential willingness to adopt a raw milk concentration plant. The empirical analysis was based on discrete choice experiments with 75 German dairy farmers to identify preferences and the possible adoption of on-farm raw milk concentration. The results showed that, in particular, farmers who deemed the current milk price to be insufficient viewed on-farm concentration using membrane technology as an option for diversifying their milk sales. We found no indication that adoption would be impeded by a lack of trustworthy information on milk processing technologies or capital.     

Experimental and numerical investigations on the heat production and thermal storage characteristics of rapid preparation amorphous powder activated coke

The heat production and thermal storage characteristics of rapid-preparation amorphous powder activated coke (RAC) were investigated. RAC was prepared by using a drop-tube reactor system. The natural oxidation characteristics of RAC were studied through combined TG–FTIR analysis and temperature-programmed experiment. Experimental results showed that CO and CO₂ were the main oxidation products of RAC in air, and that the oxidation reaction was in accordance with the Arrhenius equation and law of mass action. Thermal storage characteristics were studied through computational fluid dynamics simulation. The maximum excess temperature θ_max increases linearly with the increase of the initial temperature. The concentration fields of the products show that CO₂ is mainly concentrated in the upper part of the coke bin, and the CO generated by CO₂ at high temperature is mainly concentrated in the central part of the coke bin.     

CFETR水冷陶瓷增殖剂包层模块产氚率实验验证

水冷陶瓷增殖剂（WCCB）包层作为中国聚变工程试验堆（CFETR）候选包层之一，承担着氚增殖、核热提取、屏蔽等重要涉核功能，其中子学设计的可靠性直接影响CFETR氚自持目标的实现。为验证中子学设计工具，即MCNP和FNEDL3.0数据库，在WCCB包层中子学设计中的可靠性，基于研制出的WCCB包层模块，在DT中子环境下开展中子学实验，对以产氚率（TPR）为代表的中子学参数进行了模拟值（C）和实验值（E）对比分析。结果表明，模块中轴线位置处TPR的C/E为0.97?1.08，而模块边缘位置处TPR的C/E为0.65?0.82；模块钛酸锂层边缘区197Au（n，γ）198Au反应率的C/E为0.72?0.90，表明模块边缘区存在非期望的散射中子，导致该区TPR模拟值和实验值偏离较大。     

人工智能赋能在线实验教学行为分析

教学行为分析作是教学质量分析的重要组成部分，也是教学引导与反馈机制的重要依据。文章阐述了人工智能（AI）的含义及发展历程，重点分析总结了教学行为分析方法及AI在教学行为分析上的应用。文章以东南大学电工电子在线实验为研究平台，探索分析了AI技术在实验教学行为分析上的可行性，梳理了基于专家系统的在线实验分析系统的设计思路，充分探讨了“智能”教育在实验教学中的深刻内涵。     

枞树型核电轮槽精铣刀制造技术优化设计

以枞树型叶根精铣刀为例,阐述了可换硬质合金型线刀体和刀片精铣刀的优化设计、制造工艺、建模及优化设计,进行切削过程加工策略优化和加工过程模拟,设计制造了锥柄专用工装及检测环规、磨削刀片后角专用工装,采用NUMROTO软件编制刀片加工工步。该项目研制的可换刀片精铣刀型线精度完全能达到进口铣刀水平,能满足大部分轮槽与叶根加工对型线精度的要求,可以大幅度节约刀具费用。     

液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

电阻层析成像技术及其在水合物开采模拟实验中的应用

电阻层析成像是一种可视化的无损测量手段,可以为天然气水合物开采过程室内模拟实验提供有效的监测途径。首先介绍了电阻层析成像技术的工作原理、发展历程与应用现状,重点对电阻层析成像技术在天然气水合物室内模拟实验方面的主要应用进行了综述,并分析了存在的问题,在此基础上给出了解决问题的建议,为下一步开展水合物的电阻层析成像实验提供参考。     

一种人工情绪模型及其电商计算实验应用

针对电子商务顾客购物人工系统的计算实验研究，提出一种基于状态类比假说的人工情绪模型，给出了情绪的产生、增强、衰落和消失过程的描述方法，研究了外部刺激、情感强度和内部驱动力的计算方法，并进行了模拟分析。基于此人工情绪模型，构建了电商顾客购物的情绪-行为影响关系模型；将其应用于电商顾客购物的计算实验分析。结果表明，该人工情绪模型能较好地应用于电商复杂人工系统顾客购物的计算实验。