2种侧围加强内框总成检具结构对比分析

概述了侧围加强内框总成与周边零件的匹配关系,从检具操作的人机工程出发,描述了侧围加强内框总成检具的2种定位方式和结构设计,对比了2种定位方式对于检测结果的影响,总结了其优点和弊端,结果表明侧围加强内框总成检具采用车内方向朝下的定位方式效果更好。     

Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

不同细颗粒含量甲烷水合物沉积物三轴剪切试验研究

海域试开采区域含水合物沉积物的粒度分析结果表明水合物沉积物骨架由粗、细颗粒混合构成,通过开展多组低温、高压三轴排水剪切试验研究细颗粒含量和密度对含甲烷水合物沉积物和无水合物沉积物的强度和变形特性的影响。试验结果表明,含水合物沉积物抗剪强度及剪胀性都随细粒含量提高而显著增强。这是由于细颗粒含量增加改变了颗粒间水合物的样貌和分布特征,形成了由水合物包裹着粗颗粒-细颗粒的团簇状集合体。然而,细颗粒含量对无水合物沉积物的强度和变形特性的影响却表现出相反趋势。另外,含水合物沉积物的剪胀关系可以使用修正剑桥模型中的剪胀关系式进行描述。结果表明,剪胀关系的拟合曲线依赖于水合物饱和度的大小。通过对比研究发现,天然水合物和实验室合成水合物试样在较高饱和度时的峰值摩擦角大小及其伴随水合物饱和度的增长趋势存在差异,这种差异主要来源于水合物在沉积物骨架颗粒孔隙中不同的赋存模式及分布特征。     

Enhanced electrocatalytic oxygen reduction reaction from organic-inorganic heterostructure

Herein, molybdenum disulfide nanoflakes decorated copper phthalocyanine microrods (CuPc-MoS₂) are synthesized via two step simple hydrothermal method. The as synthesized hybrid along with pure molybdenum disulfide (MoS₂) nanoflower and pure copper phthalocyanine (CuPc) microrods are well characterized by various techniques that confirm phase, morphology, elemental compositions etc. Next, electrocatalytic oxygen reduction reaction towards fuel cell is investigated in alkaline medium and obtained results proclaim that our CuPc-MoS₂ heterostructure outperforms the other two constituent materials. Efficient oxygen reduction is achieved following four electron pathway by CuPc-MoS₂ whereas partial reduction is done through two electron process by CuPc and MoS₂ separately. Long-time durability test reveals almost 97.6% retention after 8000s that eventually dictate us that CuPc-MoS₂ heterostructure can be the efficient cathode electrocatalyst for future generation fuel cell.     

Elastoplastic stress–strain relationship of Si2N2O–Si3N4 ultrafine-grained ceramics based on microhardness test and finite element simulation

A method for obtaining the stress–strain relationship of ceramic materials was proposed on the basis of the relationship between the maximum load and the indentation size obtained by microhardness test. The microhardness testing process of Si₂N₂O–Si₃N₄ ultrafine-grained ceramics was simulated using ABAQUS finite element software. The stress–strain relationship curve of the material was obtained by repeatedly modifying and comparing the experimental and simulation results. The hardness testing principle and elastic–plastic theory were comprehensively applied in this work in accordance with the geometrical characteristics of the Vickers diamond indenter. The theoretical formula for calculating the stress–strain relationship of hard and brittle materials using microhardness experimental data combined with finite element simulation was deduced. The elastic–plastic area division principle for calculating yield stress was proposed. The accuracy of the theoretical formula was verified by comparing the theoretical and simulation results.     

Contributions of oxygen vacancies to the hydrogen evolution catalytic activity of tungsten oxides

The tungsten trioxide attracts less attention due to the low electron transfer kinetics that hinders the interaction of electrons and ions during the hydrogen evolution reaction (HER). But the oxygen vacancy strategy can inspire its electrocatalytic activity for HER because it has a positive effect on improving the charge transfer and compensating for the weak hydrogen adsorption of the tungsten trioxide. By synthesizing a series of substoichiometric tungsten oxides, we reveal the linear relationship between the catalytic activity and the content of oxygen vacancies, which indicates that the oxygen vacancy strategy is an achievable route to enhance the HER for metal oxides.     

Phase-change regulation criterion based on size-dependent lattice distortion rate and born theory for VO2 nanomaterials

Vanadium dioxide (VO₂) is a promising thermally induced phase transition material because of the abrupt changes in electrical and optical properties. However, the high phase transition temperature of VO₂ and its unspecified modulation relationship need to be resolved urgently. Herein, we proposed a simple and precise regulation criterion for VO₂ materials based on size-dependent lattice distortion rate and Born theory. The results indicated that the application of a tensile stress changed the elastic properties of the VO₂, which promoted VO₂ phase transition, and regulated the phase transition temperature. Moreover, the specific modulation relationship between the stress and phase transition temperature of VO₂ was confirmed experimentally. These results show that our criterion provides theoretical guidance to regulate VO₂ thermally induced phase transition materials.     

Lake charr (Salvelinus namaycush) clotting response may act as a plasma biomarker of sea lamprey (Petromyzon marinus) parasitism: Implications for management and wound assessment

Sea lampreys (Petromyzon marinus) have decimated the Great Lakes fisheries over the past century, and their control is central to protecting native fish populations. Wounding data collected from host fish, including classifying wounds as Type A (penetrating the integument) or Type B (superficial), is an integral part of sea lamprey monitoring efforts and helps inform management decisions; however, wound assessment is subjective and error-prone. This study aimed to determine if protein biomarkers of parasitism could be quantified in host fish plasma to serve as a potential objective aide in current wound assessment practices. Male siscowet lake charr (Salvelinus namaycush) were parasitized in a lab setting for four days, after which the sea lamprey was removed, host blood was collected, and the wound Type recorded. A second blood sample was collected from host fish with Type A wounds 7 months later. The plasma proteome was quantified using iTRAQ, and the relative abundances of 169 proteins were compared between parasitized and non-parasitized control fish. Three functional classes of proteins were modified by sea lamprey parasitism: immune response, lipid transport, and blood coagulation. A major finding was evidence of a concerted anticoagulation response in fish with Type A wounds, including changes in protein components and regulators of fibrin clot formation, some of which did not fully recover within 7 months. A modified clotting assay yielded a smaller thrombin-induced fibrin clot from parasitized fish, supporting the proteomic results. Therefore, measuring blood clottability could improve sea lamprey damage estimates by providing a more objective and quantitative index of parasitism than is offered by wounding data alone.     

犹豫模糊环境下准则具有偏好关系的TODIM方法

针对智慧制造评估时专家的决策信息具有犹豫模糊不确定性问题，提出了一种关于准则具有犹豫模糊偏好关系的改进交互式多准则决策（TODIM）方法。首先提出了准则间的犹豫模糊偏好关系概念，并证明了其基本性质。在TODIM方法优势度的计算过程中，将准则权重犹豫模糊偏好关系替代原有的精确值权重，使信息的准确性最大化。将该方法用于智能制造的评估上，实例分析结果表明所提方法是可行和有效的。     

重水浓度与吸光度关系曲线类型研究

重水作为反应堆的慢化材料，其浓度直接影响反应堆的安全和性能。为研究其重水浓度与吸光度间的关系曲线类型，基于朗伯-比尔定律，从理论上推导出液态重水中某种水分子的红外吸收峰分别与0~2种其他水分子的红外吸收峰发生重叠时重水浓度与吸光度间的关系式，分情况对二者之间的关系曲线类型进行讨论。采用傅里叶变换红外光谱仪，测得浓度为0.015%~99.98%（摩尔比）的重水标准样品吸收光谱，对重水浓度和吸光度间的关系曲线类型进行验证，理论推导与实际吻合。研究表明，一般情况下，宽浓度范围内，重水浓度与吸光度间的关系曲线类型为二次曲线；窄浓度范围内，关系曲线类型为线性。特殊情况下，吸光度为定值或关系曲线类型为线性。