辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响。采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验。结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5%和21.9%。此外,当辊速比ω/ω0为1:1.4时,成品轧制板的平均晶粒尺寸减小36%,横剖面平均硬度增加约9.2%。织构研究结果显示,辊速差越大,成品各向同性及硬度越大。然而,采用不同辊速度的连铸连轧会导致变形板伸长率降低约6%。     

Numerical investigation of a convective hybrid nanofluids around a rotating sheet

Hybrid nanofluids are formulated with various kinds of base fluids. They are designed to provide good heat transfer performance. They can achieve this by dispersing various kinds of nanoparticles in the base materials. This new technology of formulating hybrid nanofluids has a wide range of applications in various industries such as solar energy, medical equipment, and aerospace. Keeping these applications in view, this study provides an insight into the effects of convective heat transport on a Hybrid nanofluid, across a rotating sheet with a variable heat source. In this investigation, the governing boundary layer partial differential equations were modified into the ordinary differential equations, by using the proper similarity transformations. Later, they were solved numerically, with the support of the Lobatto IIIA technique in MATLAB. The influence of the Richardson number on flow parameters was studied, and it was discovered that increasing Ri increases the velocity while decreasing temperature and concentration profiles. The impact of various other flow parameters on the flow fields and also on the behavior of Nusselt number, coefficient skin friction, and Sherwood number were studied and represented graphically. The outcomes were found to be in excellent accord when compared with quoted studies.     

YOLSO: You Only Look Small Object

Small object detection is challenging and far from satisfactory. Most general object detectors suffer from two critical issues with small objects: (1) Feature extractor based on classification network cannot express the characteristics of small objects reasonably due to insufficient appearance information of targets and a large amount of background interference around them. (2) The detector requires a much higher location accuracy for small objects than for general objects. This paper proposes an effective and efficient small object detector YOLSO to address the above problems. For feature representation, we analyze the drawbacks in previous backbones and present a Half-Space Shortcut(HSSC) module to build a background-aware backbone. Furthermore, a coarse-to-fine Feature Pyramid Enhancement(FPE) module is introduced for layer-wise aggregation at a granular level to enhance the semantic discriminability. For loss function, we propose an exponential L1 loss to promote the convergence of regression, and a focal IOU loss to focus on prime samples with high classification confidence and high IOU. Both of them significantly improves the location accuracy of small objects. The proposed YOLSO sets state-of-the-art results on two typical small object datasets, MOCOD and VeDAI, at a speed of over 200 FPS. In the meantime, it also outperforms the baseline YOLOv3 by a wide margin on the common COCO dataset.     

卫生纸机压榨部运行参数及能效关系分析与优化

通过对纸机压榨部压力和压榨脱水原理的分析，得到出压榨部纸幅干度可作为压榨部的能耗指标，同时确定压榨线压力和纸机车速是压榨部能耗的主要影响因素。结合纸机实际生产测试并记录压榨脱水数据，绘制测试数据曲线图并拟合压榨线压力、纸机车速和出压榨部纸幅干度三者之间的函数关系，最终确定压榨线压力和纸机车速的最优取值范围。通过对测试数据的分析和拟合，控制压榨线压力在90 kN/m、纸机车速在1075 m/min时，纸幅质量可满足正常生产的要求，还可以节约2.1%的电能，实现卫生纸机压榨部的能耗优化。     

Simulation studies on a rotating ring disk electrode: Effects of ionic migration with kinetic complication-disk results

In continuation to my previous work (Guha S. AIChE J. 2013;59(4):1390-1399), in this work, effects of ionic migration are evaluated for disk region of a rotating ring disk electrode system by numerically solving complex differential equations, developed for mass transfer along with kinetic complication in presence of ionic migration under limiting current condition. The system for simulation is 0.01 M Fe₂(SO₄)₃ solution with H₂SO₄ as supporting electrolyte. Simulation cases are presence and absence of ionic migration with kinetic complication (oxidation of Fe²⁺ to Fe³⁺ under O₂ pressure). Results show that concentration boundary layer thickness of reactant Fe³⁺ reduces appreciably and steady-state disk current reduces substantially in presence of migration. Simulated steady-state disk current in absence of migration case agrees well with published data. Results indicate higher Fe²⁺ concentration in presence of migration and thereby higher rate of oxidation of Fe²⁺ to Fe³⁺ at all rate constant values.     

腔磁力系统中的诱导透明和快慢光传播

为了在腔磁力系统中实现可控的磁子诱导透明、磁力诱导透明以及快慢光传播,建立了一个混合腔磁力系统.该系统由一个含有YIG球的微波腔和在z方向对球施加一个均匀的偏置磁场组成,并用强泵浦场驱动磁子和弱探测场驱动微波腔.研究表明,通过调节腔与磁子之间的相互作用强度和微波腔与磁子的耗散比,可以增加磁子诱导透明(MIT)、磁力诱导透明(MMIT)的效果和提高快慢光传播的速度.该研究结果可为磁力诱导放大、量子光学操纵和量子信息存储以及灵敏光开关的研究提供参考.     

Strong tribocatalysis of strontium titanate nanofibers through harvesting friction energy for dye decomposition

Friction is a common clean energy and can be harvested and converted into electricity energy via triboelectricity, which can electrochemically drive dye decomposition in theory. In this work, the tribocatalytic Rhodamine B dye decomposition has been experimentally realized in strontium titanate (SrTiO₃) nanofibers, which are synthesized via a hydrothermal method. In the tribocatalytic dye decomposition process, the friction is exerted in the interface between catalyst surface and a polytetrafluoroethylene (PTFE) Teflon rod setup with the different stirring speed. The RhB dye decomposition ratios of SrTiO₃ nanofibers at these stirring speeds of 200 rpm, 400 rpm, 600 rpm, and 800 rpm are respectively 24.2%, 51.8%, 73.9% and 88.6%, yielding to these reaction rate constants of ～0.0112 h^?1, ～0.0260 h^?1, ～0.0562 h^?1 and ～0.0877 h^?1. The main active species, which play an important role in tribocatalytic process, are the superoxide radicals and holes on basis of the active species quenching experiment results. The excellent tribocatalysis activity makes SrTiO₃ nanofibers potential for application in dye wastewater treatment through utilizing the environmental friction energy.     

基于Kinect的自适应跑步机行走速度估计方法

自适应跑步机是康复医疗和人体工程学的研究热点,也是虚拟现实运动输入设备的重要组成部分。针对自适应跑步机上人体位置相对地面几乎无变化,很难通过简单的位置差分获得到人体运动速度的问题,提出了一种适应性广、无标记点、非接触式的行走速度估计方法。将Kinect采集到的人体关节点位置数据通过四元数标定、高斯滤波和三次样条插值处理后,用步长修正算法计算出行走时的步态时空参数。基于步态时空参数估计使用者在自适应跑步机上行走时的速度。在固定速度的跑步机上,通过将速度估计值与所设定的跑步机实际速度进行对比,验证了速度估计算法有效性,该速度估计算法可以适用于自适应跑步机的控制算法开发。     

两种3D打印用雾化Ti-6Al-4V粉末的对比研究

本研究分别利用水冷铜坩埚真空感应熔炼气雾化(VIGA-CC)和等离子旋转电极(PREP)两种技术制备出球形Ti-6Al-4V合金粉末,作者利用SEM、同步辐射CT扫描-三维重建和氩气含量测试等分析手段对不同粒径的Ti-6Al-4V合金粉末的孔洞缺陷和氩气含量、硬度值进行了表征。实验结果表明, VIGA-CC粉末粒度分布宽,细粉收得率较多,粉末粒度分布在40~180 μm之间, PREP粉末的粒度分布较窄,主要集中在110~180 μm之间；金属粉末内部的孔隙率、气体含量和孔尺寸随着粉末粒度的增大而增大,且同一粒径范围内VIGA-CC粉末的气孔概率多于PREP粉末；随着粉末粒径减小,粉末截面组织逐渐细化,其硬度值逐渐升高,整体上VIGA-CC粉末硬度值高于PREP粉末。     

Theoretical and Experimental Studies for the Transient Response of Cavity

During the transient state of aero-engine,cavity has evidently transient characteristics in the secondary air system.To investigate transient characteristics,theoretical and experimental studies were implemented for both static and rotating cavities.First of all,the typical transient response phenomena in secondary air system were investigated based on the basic concepts of the dynamic process.According to the basic theory of gas dynamics,the causes of transient phenomena were analyzed in two aspects,external disturbance,and system physical properties.Several dimensionless parameters were introduced to analyze the transient response characteristics of air system.Second,the experimental results of the static cavity indicated that the actual response time increased with the increase of the inlet pressure.The experimental results of the rotor-stator cavity showed that the low rotational speed on the response process had little effect,and the response time gradually increased when the speed continued to increase.Third,the test results of multiple components suggested that when the valve was opening the inlet pressure of the static cavity increased quickly and then reached a stable value,but the pressure of the static cavity,stable pressure cavity and rotor-stator chamber rose gradually.It was also obtained the actual response time of them was increased.The closer the measuring points were to the disturbance source,the shorter the delay time was.