Ultimate bearing capacity of strip footing resting on clay soil mixed with tire-derived aggregates

This study investigated the use of recycled tire-derived aggregate (TDA) mixed with kaolin as a method of increasing the ultimate bearing capacity ( UBC) of a strip footing. Thirteen 1g physical modeling tests were prepared in a rigid box of 0.6 m × 0.9 m in plan and 0.6 m in height. During sample preparation, 0%, 20%, 40%, or 60% (by weight) of powdery, shredded, small-sized granular (G 1–4 mm) or large-sized granular (G 5–8 mm) TDA was mixed with the kaolin. A strip footing was then placed on the stabilized kaolin and was caused to fail under stress-controlled conditions to determine the UBC. A rigorous 3D finite element analysis was developed in Optum G-3 to determine the UBC values based on the experimental test results. The experimental results showed that, except for the 20% powdery TDA, the TDA showed an increase in the UBC of the strip footing. When kaolin mixed with 20% G (5–8 mm), the UBC showed a threefold increase over that for the unreinforced case. The test with 20% G (1–4 mm) recorded the highest subgrade modulus. It was observed that the UBC calculated using finite element modeling overestimated the experimental UBC by an average of 9%.     

气藏型储气库注气期试井分析探讨

针对气藏型储气库注采井注采过程中储层物性参数影响因素不明确、注采能力不对称的问题。基于相国寺储气库井下连续油管试井测试结果,提出储气库注气期“温降效应”、“变表皮效应”的概念,分析了储气库注采过程中温降效应、变表皮效应以及储层应力敏感对注采的影响。通过气藏型储气库注气期试井分析技术,研究各因素在试井曲线上的响应特征以及对试井解释参数的影响。结果表明:①相对于采气期试井测试,注气期测试得到的储层物性参数具有同样的参考价值;②储气库温降效应对于试井解释结果的影响可忽略不计,而在不同注采运行周期内,变表皮效应以及应力敏感效应影响差异较大;③编制储气库注采运行方案时应充分考虑变表皮效应与应力敏感的影响,在不同注采运行周期内开展试井测试获取准确的储层参数值。研究成果为储气库试井测试与解释提供了重要的研究依据和理论指导。     

能源土边界面模型的应力更新算法及算例分析

水合物的存在会显著影响能源土的刚度、峰值强度与剪胀性。针对已有能源土模型的不足，结合边界面模型的建模思想，构建一个新的能源土边界面模型，模型参数较少，能够恰当反映能源土的应力-应变关系。计算能源土变形问题的核心在于正确积分塑性本构方程，应用完全隐式回退Euler算法，建立模型应力及塑性内变量的更新公式，并给出显式的一致性切线模量表达式。基于ABAQUS软件提供的二次开发接口，编写模型的用户材料子程序，应用已有试验数据验证程序正确性。最后应用开发的子程序对能源土的平面应变试验进行模拟，分析水合物饱和度对剪切带倾角与孔隙比的影响。     

碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。     

Laboratory tests on the engineering properties of sensor-enabled geobelts (SEGB)

To measure geosynthetic reinforcement strains, sensor-enabled geobelts (SEGB) that perform the reinforcement and self-measurement functions were developed in this paper. The SEGB of high-density polyethylene (HDPE) filled with carbon black (CB) were fabricated by both the industry and the laboratory. To study the mechanical properties and tensoresistivity performance of the SEGB, in-isolation tests and in-soil tests were performed. Hot pyrocondensation pipes (HPP) were used to protect the SEGB against the influence of water. For the SEGB specimens developed in the laboratory, the optimal CB filler content was 47.5%. For the SEGB fabricated by the industry, the optimal CB content was slightly decreased compared to the SEGB fabricated in the laboratory. For the modified SEGB sealed with HPP, the strain at the fracture was improved, while its tensile stress and the frictional property of the geobelt-soil interfaces both decreased slightly. In the pull-out tests, the self-measurement function of the SEGB was proved to be effective for evaluating the deformation behavior of geosynthetic reinforcement. The results are helpful for further application of SEGB technology in engineering.     

Assessing smoke toxicity of burning combustibles by four expressions for fractional effective dose

Toxicity of smoke generated in a fire is difficult to measure accurately. That is because gas sensors for measuring rapidly varying concentrations of toxic gases are not yet developed. Simple expressions are searched for quick measurement in assessing smoke toxicity practically. Four equations on calculating fractional effective dose (FED) related to toxic effluents were reported in the literature, each based on different assumptions. FED value was proposed to be calculated based on peak carbon monoxide concentration and peak carbon dioxide concentration, and transient carbon monoxide, carbon dioxide, and oxygen concentrations. The four values were compared in this article using literature data on toxic gases from different materials measured by (i) cone calorimeter; (ii) full-scale burning tests; and (iii) tunnel full-scale tests. Measured carbon monoxide, carbon dioxide, and oxygen concentrations by standard equipment of oxygen consumption calorimeters were used to calculate the four FED values. It is found that the values of FED based on peak carbon monoxide and carbon dioxide concentrations (denoted as FED₂) are similar to the average values of FED calculated from the updated equation in the literature using the oxygen consumption calorimeters. Putting the values of FED₂ in fire safety design guides is then recommended.