Weighted preliminary-summation-based principal component analysis for non-Gaussian processes

For industrial chemical process, preliminary-summation-based principal component analysis (PS-PCA), an amended PCA method was recently provided for coping with both Gaussian and non-Gaussian characteristics. By summing the training and monitoring data respectively, PS-PCA is capable of resolving the issue of non-Gaussian processes and achieves higher fault detection rate than the traditional PCA. However, in the PS-PCA summation operation, all data samples are regarded as the same weight, which results in the fault information of newly-samples may be diluted, leading to significant detection delays. To address this challenge, in this paper, we propose a novel weighted PS-PCA (WPS-PCA) method that employs an exponential weighting scheme to put more emphasis on recent information. Subsequently, a mathematical argument demonstrates that when the number of variables is enough plentiful, the obtained summation combined with the generalized central limit theorem conforms to approximately a Gaussian distribution. The kurtosis relationships indicate this conversion will bring out well-pleasing feasibility for conventional PCA. Ultimately, the proposed technique verifies detection performance using the Tennessee Eastman process, which is compared with the existing PCA and PS-PCA schemes, in terms of the fault detection time and fault detection rate. The simulation studies reveal that the proposed method is efficient and superior.     

地理标志产品镇江香醋标准符合性验证分析

目的从理化指标、特征有机酸以及检验方法等对2018年江苏镇江地理标志产品镇江香醋进行标准验证。方法对5个质量等级,共计20批次镇江香醋样品进行抽检,采用GB/T 18623-2011标准对特征性成分进行分析检测,并对检验标准进行验证。结果镇江香醋5个等级产品理化特性均符合标准规定,未检测到致病菌,菌落总数以及大肠菌群均未超过标准规定的限量要求;重金属铅和总砷、真菌毒素黄曲霉毒素B_1以及食品添加剂苯甲酸和山梨酸均符合标准规定技术限量要求;具有镇江香醋标志性特征有机酸(乳酸、乙酸、焦谷氨酸和琥珀酸),且随着等级要求越高,其有机酸含量越高。结论镇江香醋特征性成分完全符合其标准规定要求,镇江香醋标准与国家强制性标准一致,建议可对有机酸的液相检测方法进行优化,尝试离子排斥色谱柱或耐酸C_(18)柱,以满足镇江香醋有机酸液相检测更高的分析要求。     

果蔬汁中氯氰菊酯、多效唑、哒螨灵含量测定能力验证结果分析

目的分析果蔬汁中氯氰菊酯、多效唑、哒螨灵含量测定能力验证结果。方法本实验室参加中国检验检疫科学研究院测试评价中心组织的果蔬汁中氯氰菊酯、多效唑、哒螨灵的测定能力验证(ACAS-PT806-2019),根据能力验证作业指导书要求和样品情况,采用了QuEChERS样品前处理净化方案,气相色谱电子捕获检测器检测氯氰菊酯,内标法定量,液相色谱串联质谱检测多效唑和哒螨灵,外标法定量。结果 1号样品中氯氰菊酯、多效唑、哒螨灵残留量分别为0.098、0.043、0.084 mg/kg, 2号样品中氯氰菊酯、多效唑、哒螨灵残留量分别为:0.036、未检出、0.013 mg/kg。所有测定项目结果均为满意(|Z|≤2)。结论实验室解决了此次能力验证中没有空白样品,检测项目基质效应差异明显等难点。实验室农药残留检测能力得到有效验证和提高。     

黔北桑木场背斜铅锌矿深部找矿实例分析*#br#

黔北桑木场背斜位于上扬子地块黔北隆起区毕节弧形褶皱带与赤水克拉通盆地的交汇部位，属于有利的铅锌成矿区带。区内铅锌矿的赋矿层位主要有震旦系灯影组、寒武系清虚洞组、高台组及石冷水组，矿体多产于背斜核部并受断层或裂隙控制。通过对地层岩性特征、地表矿化特征、控容矿构造特征、化探异常特征、物探异常特征等进行综合研究，选择在成矿有利地段进行了工程验证，为进一步开展桑木场背斜铅锌矿深部找矿工作提供了思路。     

气压仪器检定装置的升级改造

文章针对气压检定装置在使用中存在的一些问题,会同厂家对其进行了升级改造。介绍了改造后的气压检定装置的设计原理、软件和硬件设计以及技术指标等,新装置集成了目前先进的计量设备及技术,编写相应的程序软件升级改造而成。可广泛适用于气象部门空盒气压表、自动站气压传感器以及部分数字压力计的计量检定工作,实现气压检定工作的自动化,提高检定数据的准确性和可靠性,并有效提高检定的工作效率。     

Effect of the composition and degree of crosslinking on the properties of poly(l‐lactic acid)/crosslinked polyurethane blends

Poly(l ‐lactic acid)/crosslinked polyurethane (PLLA/CPU) blends which were prepared via reactive blending of PLLA with poly(?‐caprolactone) (PCL), glycerol and 4,4′‐methylenediphenyl diisocyanate showed excellent toughness. The effects of the composition of the mixture and degree of crosslinking of CPU on the toughness of the PLLA/CPU blends (80/20 w/w) were studied in detail. Dynamic mechanical analysis and rheological measurements were used to characterize the structure of the in situ formed CPU in the PLLA matrix. A novel netlike phase structure was observed when the average molecular weight of PCL and degree of crosslinking were 1 kDa and 10%, respectively. The impact strength of the blend was enhanced from 2.2 kJ m^?2 for pure PLLA to 62.4 kJ m^?2; meanwhile, the elongation at break was increased to 489.8%. Therefore, the mechanical properties of PLLA/CPU blends can be easily tailored by tuning the composition of the mixture and the degree of crosslinking of CPU. © 2018 Society of Chemical Industry     

Adaptive robust control of fully-constrained cable driven parallel robots

In this paper, adaptive robust control (ARC) of fully-constrained cable driven parallel robots is studied in detail. Since kinematic and dynamic models of the robot are partly structurally unknown in practice, in this paper an adaptive robust sliding mode controller is proposed based on the adaptation of the upper bound of the uncertainties. This approach does not require pre-knowledge of the uncertainties upper bounds and linear regression form of kinematic and dynamic models. Moreover, to ensure that all cables remain in tension, proposed control algorithm benefit the internal force concept in its structure. The proposed controller not only keeps all cables under tension for the whole workspace of the robot, it is chattering-free, computationally simple and it does not require measurement of the end-effector acceleration. The stability of the closed-loop system with proposed control algorithm is analyzed through Lyapunov second method and it is shown that the tracking error will remain uniformly ultimately bounded (UUB). Finally, the effectiveness of the proposed control algorithm is examined through some experiments on a planar cable driven parallel robot and it is shown that the proposed controller is able to provide suitable tracking performance in practice.     

酒钢焦煤仓储系统能力的效验

酒钢公司焦化工序新建4#焦炉项目即将建成投产。4#焦炉的供料工作也迫在眉睫,为了确保4#焦炉顺利投产,保证公司焦化工序的炼焦煤正常供给,我们对现有焦煤料场的储存能力和现有设备装备的生产能力等性能进行了效验。认为用焦煤系统现有的设备、设施,来保证集团公司逐年上升的焦煤用量是无法满足生产需求的。本文简要核算了其卸供料能力。     

旋挖钻机设备油液智能分析与健康监测

为了对直升机盒段件入水载荷进行分析，开展了模型垂直入水冲击试验，同时采用有限元-光滑粒子流体动力学（finite element method-smooth particle hydrodynamics，简称FEM-SPH）耦合数值方法进行仿真分析，计算了不同材料构型和速度下的过载、压力及应变结果。与试验结果进行对比表明，仿真结果与试验值吻合较好，预测的结构失效破坏模式与试验结果基本一致，可为真实直升机入水冲击的结构设计提供参考。