水浴振荡碱消解-火焰原子吸收法测定土壤中六价铬

建立了水浴振荡碱消解-火焰原子吸收法测定土壤中的六价铬的方法。称取经风干、研磨并过0.15 mm孔径筛的土壤样品2.0 g(精确至0.01 g)置于150 mL锥形瓶中,加入25.0 mL碱性提取溶液,再加入400 mg氯化镁和0.5 mL磷酸氢二钾-磷酸二氢钾缓冲溶液,用聚乙稀薄膜封口,置于水浴恒温振荡器中。常温振荡样品5 min后,开启加热装置,加热水浴振荡至90～95℃,保持90 min。取下,冷却至室温。过滤,用硝酸调节溶液pH至7.5±0.5,将此溶液定容至50 mL容量瓶中,摇匀,待测。该方法采用水浴振荡碱消解的前处理方式进行土壤中六价铬的全消解,代替了磁力搅拌加热方式的消解,优化了前处理条件,简化了试验步骤,节约了分析测试时间,提高了分析效率,此方法还有利于处理大批量土壤样品。探讨了样品前处理提取温度的优化选择、氯化镁加入量的研究优化、提取时间的优化选择、pH值的优化以及三价铬干扰试验的影响。确认了最优化的仪器条件,对六价铬做了线性范围测试,曲线相关系数均在0.999以上。依据HJ 168—2020方法做了检出限,六价铬的检出限为0.5 mg/kg,以4倍检出限做测定下限,则测定下限为2.0 mg/kg。(取样量为2.0 g,定容体积为50 mL)。选取GBW(E)07251—255系列标准物质进行测试试验,试验结果的精密度和准确度均可满足土壤环境监测技术规范的要求。     

基于VMD和改进TCN的短期光伏发电功率预测

光伏发电功率存在波动性,且光伏出力易受各种气象特征影响,传统TCN网络容易过度强化空间特性而弱化个体特性。针对上述问题,文中提出一种基于VMD和改进TCN的短期光伏发电功率预测模型。通过VMD将原始光伏发电功率时间序列分解为若干不同频率的模态分量,将各个模态分量以及相对应的气象数据输入至改进TCN网络进行建模学习。利用中心频率法确定VMD的最优分解模态分解个数。在传统TCN预测模型的基础上,使用DropBlock正则化取代Dropout正则化以达到抑制卷积层中信息协同的效果,并引入注意力机制自主挖掘并突出关键气象输入特征的影响,量化各气象因素对光伏发电的影响,从而提高预测精度。以江苏省某光伏电站真实数据为例进行仿真实验,结果表明所提预测方法的RMSE为0.62 MW,MAPE为2.03%。     

Effect of sintering temperature on lightweight aggregates manufacturing from copper contaminated soil

Manufacturing lightweight aggregate (LWA) at high temperature is an effective way to immobilize heavy metals in solid waste. This work investigated the performance and solidification mechanism of LWA prepared from copper contaminated soil. The volume expansion of LWA could reach a maximum of 28%, and its lowest density accounted of 1.5 g/cm³, which met the standard requirements. Optical microscope and micro-CT test illustrated that the addition of Cu leaded to obvious phase separation in LWA. The Cu leaching result of LWA first increased and then dropped with the temperature. The XRD test found that the main formation phase of Cu in LWA were t-CuFe₂O₄ and amorphous phase that they had different acid resistance ability. XPS revealed that the main cause of the agglomeration of liquid phase in LWA was the chain broken reaction between Cu and Si–O tetrahedron. SEM-EDS results showed that the distribution of Cu and Si had a strong correlation, which meant that Cu mostly formed amorphous phase. This work showed the uniqueness of Cu in the high temperature immobilization and pointed out the best immobilization target phase.     

木质纤维与水泥共同改良软土的力学性能与微观机制分析

通过压实试验、无侧限抗压强度试验和劈裂试验,分析不同木质纤维含量、水泥含量和固化时间对软土力学性能的影响规律,探讨木质纤维、水泥改良软土的微观机制。结果表明,木质纤维的加入对水泥改良软土的击实特性有显著的影响;木质纤维与水泥可有效改善土体的抗压和劈裂抗拉强度,随着木质纤维含量的增加,改良土的抗压和劈裂抗拉强度呈现出明显的“驼峰”现象,并在木质纤维含量为0.25%时最大;木质纤维与水化产物、软土颗粒形成互锁效应,增大了改良土的摩擦力,同时木质纤维还承担一定的拉伸强度,使改良土的劈裂强度增加。     

原油含水在线检测影响因素的研究

微波法作为原油开采过程中最常用的含水率检测方式,其检测效果极易受到实际开采环境中多因素影响从而产生检测误测。试验分析了矿化度以及温度两种实际开采环境下存在的因素对于微波实时检测含水率精度的影响。通过对试验数据的处理,运用二次拟合有效得出含水检测值伴随矿化度(矿化度组分:CaCl_2)的变化规律。利用试验所得规律,可有效将微波含水传感器精度提高,为提高微波含水检测精度的研究提供了校正参数和理论依据。     

不同消解方法对土壤中铜锌测定的影响

采用微波消解法和石墨消解法对土壤样品进行预处理,用火焰原子吸收分光光度法测定土壤中铜和锌的含量。对3个土壤标准物质(GSS-17、GSS-30、GSS-34)的精密度和准确度进行了分析,结果表明:微波消解法和石墨消解法的检出限、精密度和准确度均能满足土壤检测的要求,石墨消解法相对于微波消解法更加便捷,具有很好的精密度和准确度。     

Melt processing and characterization of tricalcium phosphate filled polybutylene adipate-co-terephthalate/polymethyl methacrylate composites for biomedical applications

Abstract

PBAT/PMMA/MA/TCP composites were prepared by melt blending and characterized by FTIR, XRD, SEM and in vitro bioactivity studies using SBF and cell viability tests. SBF studies revealed good bioactivity nature which was observed in SEM and confirmed by EDAX. Cell viability test revealed an excellent viability of squamous cells within 2?h than the control. Soil burial tests of the composites show fast degradation within 50 days under natural conditions. The tensile and hardness properties is marginally increased than that of PBAT/PMMA blend. These biocomposites can be used for the fabrication of medical devices by melt blending and injection molding process.     

Evaluating the profile of myofibrillar proteins and its relationship with tenderness among five styles of dry-cured hams

In order to investigate the relationship between profile of myofibrillar proteins and tenderness among 2 kinds of Chinese hams (Jinhua and Xuanwei) and 3 kinds of European hams (Iberian, Serrano and Parma), shear force, myofibril fragmentation index (MFI), SDS-PAGE, carbonyls content and Raman spectroscopy were investigated. The shear force and salt content of Chinese hams were significantly higher than that of European hams, while moisture content was lower than that of European hams (p < 0.05). MFI values and SDS-PAGE profile revealed that the degradation of myofibrillar proteins in Chinese hams was lower than in European hams. In addition, Chinese hams showed significantly higher carbonyls content and β-sheet content compared with European hams, indicated that proteins aggregation intensively inhibited the degradation of myofibrillar proteins in Chinese hams. These results indicated that the higher shear force in Chinese style hams could be attributed to the lower moisture content and limited proteolysis.