An optimal configuration for hybrid SOFC,gas turbine,and Proton Exchange Membrane Electrolyzer using a developed Aquila Optimizer

In this research, a technical, economic and environmental analysis has been proposed to a Hybrid Solid Oxide Fuel Cell (SOFC) system-based hybrid system including biomass, gas turbine, and Proton Exchange Membrane Electrolyzer. A multi-objective optimization technique has been utilized to improve the overall product cost and the exergy effectiveness based on a developed version of Aquila Optimizer (DAO). The main idea of using the developed version is to improve the accuracy and the precision of the original Aquila optimizer. The system is then authenticated in terms of energy/exergy effectiveness, and energy-economic efficiency. The achievements indicate that employing the optimization algorithm for different configurations provided satisfying results for the system.     

内含实体对H型垂直轴风力机气动性能的影响

以H型垂直轴风力机及其内含圆柱形实体为研究对象,对NACA0018翼型的五叶片H型垂直轴风力机的气动性能进行数值模拟和实验验证。分析8种不同直径的内含圆柱体,在内含实体截面积占风轮迎风面积之比分别为21.2%、50.0%和76.9%时,风力机风能利用率的峰值分别下降8.04%、20.7%及74.3%。结果表明：随着内含实体直径的增大,风能利用率的峰值逐渐减小,开始较为缓慢,达到一定值时快速下降。小直径内含实体主要影响叶片在下风区的转矩,对风能利用率的影响较小,而大直径内含实体还会影响叶片在上风区的转矩,其风能利用率迅速减小。对于内含固定直径的实体,比如在现有建筑物外侧安装风力机时,其风轮半径的选择需综合考虑风能利用率和风力机的建造成本两方面的因素。研究结果可为建筑物与垂直轴风力机进行有效结合以提高风能的利用提供参考。     

An economic investigation of the wind-hydrogen projects: A case study

Hydrogen as an energy carrier can play a significant role in reducing environmental emissions if it is produced from renewable energy resources. This research aims to assess hydrogen production from wind energy considering environmental, economic, and technical aspect for the East Azerbaijan province of Iran. The economic assessment is performed by calculation of payback period, levelized cost of hydrogen, and levelized cost of electricity. Since uncertainty in the power output of wind turbines may affect the payback period, all calculations are performed for four different turbine degradation rates. While it is common in the literature to choose the wind turbine based on a single criterion, this study implements Multi-Criteria Decision-Making (MCDM) techniques for this purpose. The results of Step-wise Weight Assessment Ratio Analysis illustrates that economic issue is the most important criterion for this research. The results of Weighted Aggregated Sum Product Assessment shows that Vestas V52 is the most suitable wind turbine for Ahar and Sarab cities, while Eovent EVA120 H-Darrieus is a better choice for other stations. The most suitable location for wind power generation is found to be Ahar, where it is estimated to annually generate 2914.8 kWh of electricity at the price of 0.045 $/kWh, and 47.2 tons of hydrogen at the price of 1.38 $/kg, which result in 583 tons of CO₂ emission reduction.     

A Role for Human Renal Tubular Epithelial Cells in Direct Allo-Recognition by CD4+ T-Cells and the Effect of Ischemia-Reperfusion

Direct allorecognition is the earliest and most potent immune response against a kidney allograft. Currently, it is thought that passenger donor professional antigen-presenting cells (APCs) are responsible. Further, many studies support that graft ischemia-reperfusion injury increases the probability of acute rejection. We evaluated the possible role of primary human proximal renal tubular epithelial cells (RPTECs) in direct allorecognition by CD4+ T-cells and the effect of anoxia-reoxygenation. In cell culture, we detected that RPTECs express all the required molecules for CD4+ T-cell activation (HLA-DR, CD80, and ICAM-1). Anoxia-reoxygenation decreased HLA-DR and CD80 but increased ICAM-1. Following this, RPTECs were co-cultured with alloreactive CD4+ T-cells. In T-cells, zeta chain phosphorylation and c-Myc increased, indicating activation of T-cell receptor and co-stimulation signal transduction pathways, respectively. T-cell proliferation assessed with bromodeoxyuridine assay and with the marker Ki-67 increased. Previous culture of RPTECs under anoxia raised all the above parameters in T-cells. FOXP3 remained unaffected in all cases, signifying that proliferating T-cells were not differentiated towards a regulatory phenotype. Our results support that direct allorecognition may be mediated by RPTECs even in the absence of donor-derived professional APCs. Also, ischemia-reperfusion injury of the graft may enhance the above capacity of RPTECs, increasing the possibility of acute rejection.     

Thermodynamic performance analysis and environmental impact assessment of an integrated system for hydrogen and ammonia generation

A novel multigeneration plant that's using natural gas for power, hydrogen, ammonia, and hot water generation, is planned and analyzed, in the current paper. The suggested combined plant integrated with four sub-systems, which are the Brayton cycle, reheat Rankine cycle, the high-temperature steam electrolyzer for hydrogen production, and ammonia synthesis processes. Also, thermodynamic analysis and environmental impact assessment are conducted for the designed plant and sub-systems. Moreover, the sustainability index analysis of this proposed study is conducted. The effects of some important indicators on the performance and on the environmental impact of the modeled system and sub-processes are also studied. According to analyses results, it is noted that the energetic and exergetic efficiencies of the suggested system are 51.83% and 70.27%, respectively, and also the total CO₂ emission rate is 11.4 kg/kWh for the integrated plant. Furthermore, the total irreversibility rate is computed as 40007.68 kW, and furthermore, the combustion chamber has a maximum irreversibility rate with 20,033 kW, among the proposed plant components.     

潮流能水平轴水轮机在剪切来流下的水动力分析

采用基于计算流体力学方法的全尺度数值模拟计算,建立了适用于潮流能水轮机模拟的剪切来流环境,通过数值计算结果,对潮流能水轮机随时间变化的宏观力和流场特征进行了系统分析,探索水轮机在复杂工况下的水动力特性规律。结果表明,水轮机整个叶轮的总体平均受力在剪切流工况中未受到明显影响; 单个叶片的瞬态轴向力系数和瞬态轴向扭矩系数在旋转周期内出现了明显的周期性变化,且周期性变化幅值随转速增大而增大; 非定常的瞬时轴向扭矩和力的周期性振荡容易引起单个叶片的结构性振动,可能对水轮机的机械结构造成影响。     

基于正交试验的非对称垂直轴水轮机数值模拟

运用正交试验法开展了具有非对称NACA翼型的垂直轴潮流能水轮机的非定常数值模拟研究,分析弯度、弯度位置、前缘半径、最大厚度位置对叶轮能量提取率的影响。使用极差分析法确定了各因素影响的主次顺序和各尖速比下由最优参数确定的翼型。结果表明:在不同尖速比下,弯度是影响水轮机性能的主导因素,对水轮机能量提取率的贡献率分别为44.7%(尖速比λ=2.25)、53.4%(尖速比λ=2.5)和59.4%(尖速比λ=2.75);次要因素为最大厚度所在位置,其余两个参数对其性能影响较小。针对最优参数确定的翼型进行验证,结果证实具有该翼型的水轮机的动力学性能要好于其他翼型。     

高效80MW等级亚临界凝汽式汽轮机结构特点分析

对哈汽公司新开发的高效80MW等级亚临界凝汽式汽轮机的总体布置和结构特点进行介绍,分析了该型汽轮机的独特性和先进性,以期为同类型汽轮机的设计提供参考和借鉴,帮助行业相关技术人员快速了解其总体布置和结构特点。     

波浪荷载作用下海上新型潜式浮式风力机运动特性研究

以适用于中等水深(50~200 m)的新型潜式浮式风力机为研究对象,该风力机基础综合Spar式、半潜式及张力腿(TLP)3类浮式风力机基础的优点,运行时基础主体淹没在水下,具有较小的水线面(如同Spar平台),受波浪影响较小;平台通过张紧式系泊线与海床相连(如同TLP平台),具有良好的垂荡和摇摆运动特性;拖航状态下,浮式平台处于半潜状态,水线面面积大(如同半潜式平台),具有良好的浮稳性。通过分析不同波况下的潜式浮式风力机耦合动力响应得到潜式浮式基础的横荡、纵荡、垂荡及纵摇运动响应,以及发电功率、叶片根部弯矩、塔筒顶部和底部弯矩、锚链张力时程曲线。研究结果表明:波浪对于结构的纵摇运动的影响最为明显,对发电功率、叶片根部弯矩和塔筒顶部弯矩影响较小,对塔筒底部弯矩和系泊线张力影响较大。     

多泥沙河流水电站水轮机转轮内部流动数值模拟

针对多泥沙水电站水轮机转轮的泥沙磨损问题,以HLA351-LJ-275水轮机为模型,对水轮机在设计工况下,运用N-S方程和标准κ-ε湍流模型,利用CFX求解器进行仿真流动模拟。水轮机转轮进口沿叶高20%、50%、80%流面的压力、泥沙速度及泥沙体积分数分布的数值结果表明,水轮机转轮叶片工作面压力大于背面且最小压力高于气化压力。泥沙速度在叶片进水边和出水口位置普遍较高。水轮机转轮叶片工作面的泥沙体积分数大于背面,叶片工作面的泥沙体积分数在叶片出水口普遍较高,叶片背面的泥沙体积分数在叶片进水边普遍较高。研究结果对多泥沙河流水轮机转轮叶片的泥沙磨损评估及维修具有指导意义。